What Is A Water Heater Safety Tank? Read These Interesting Facts!

Before installing a water safety tank, which is also called an expansion tank, you must think about what is a water heater safety tank? You learn all about safety tanks as you further delved into this article! A thermal expansion tank, also known as a water heater safety tank, protects your home piping against temperature changes.

Due to thermal expansion, pressure loss is rarely a worry with tankless water heaters, and the plumbing system may be in danger if you use a tank-style water heater.

what is a water heater safety tank

A typical tank water heater can put a lot of pressure on your plumbing pipes and fittings in a closed plumbing system during water heating.  A water heater safety tank in a plumbing system can assist reduce the danger of pressure loss to the piping system. This article discussed a water heater safety tank, how it works, how to install it, and why we use it. So without further ado, let’s get started!


What’s Water Heater Safety Tank?

In this paragraph, you’ll learn what is a water heater safety tank? To alleviate pressure in your water heater, you can use a water heater safety tank. It is a small tank that gathers water and holds it in a bladder. Water expansion wasn’t an issue in the past because the extra few gallons just flowed into the city’s water supply.  However, because present plumbing restrictions prevent it from accessing the city’s system, where it may pollute the public water supply, the enlarged water has nowhere to go today.

Your water pipes, water heater, and some devices must cope with the higher pressure induced by thermal expansion if the proper control valves and backflow preventers are installed. This results in excessive wear and strain, leading to problems with hot water-using equipment, such as your hot water system. It might potentially be the source of a pipe rupture!


What’s The Purpose Of Using Saftey Tanks?

The water heater safety tank serves as an overflow collector by collecting excess water volume and fluctuations in the receiving water supply pressure. Because water expands when warm due to thermal expansion, the heater creates additional water capacity every moment it warms the water. When heated, The cold water, when warmed to 120 degrees Fahrenheit, in a typical 50-gallon water heater is expected to rise to 52 gallons. This increased water volume can cause excessive pressure in the pipework, which, if significant sufficiently, can cause long-term injury to the plumbing system: water pipelines and the water heater itself. You may also be interested to know about the benefits of a water heater expansion tank.


Is Saftey Tank Necessary?

It’s dangerous to use a water heater without a safety tank. Even though so many water heaters lack a safety tank, we strongly advise you to install one. Your pipes, devices, and water heater will all be protected. The pressure in the water tank can grow to an increased risk of exposure due to overflowing heated water, which might lead the elements to fail.

As you might expect, overflowing hot water can also seep out via the T&P Valve, causing significant drainage problems. Going without the need for a safety tank might have harmful repercussions even if components do not fail baldly and no leakage arises. An overly filled tank of hot water might lead the heater’s service life to be ended prematurely, not even to indicate the possibility that the components would fail quicker than anticipated.


How To Install A Water Heater Saftey Tank

You may still profit from a water heater safety tank if you don’t even have a one-way valve put on the main water line and hence don’t even have a closed water system. Safety tanks are often put on the cold water line before reaching the water heater. However, they can be positioned everywhere on the cold water supply before entering the hot water system. The safety tank keeps the additional increasing pressure in the system from hitting the fixtures and harming them excessively, preventing leaky faucets and overflowing bathrooms.

Prices for water heater safety tanks start at roughly $40 and go up to over $200, depending on what size of safety tank you’re installing.  A basic 2-gallon tank will use 40- or 50-gallon heating systems for most household setups. With a standard ¾ inches slotted attachment, the tank is simple to install. If there isn’t one already, a tee connection may have to be installed well above the hot water system.

It’s a great idea to acquire a quote for a water heater installation and safety tank installation at the very same time if you’re choosing a plumber. If done simultaneously, it may not cost significantly more than you are presently investing. Even if it isn’t needed, consider building a safety tank if you’re installing a water heater manually because the advantages significantly exceed the labor and cost.


It’s A Wrap!

We’re glad to know that this guide has helped you learn what is a water heater safety tank. We have discussed a complete detailed guide for you in very simple ways, so for better understanding, read this article carefully. Don’t hesitate to know these things too; read about what is the energy factor of a water heater and how to replace expansion tank on a water heater. Thank you, friends, for being with us at the end!

Leave a Comment