What baby car seat to buy There are a ton of different baby car seats on the market to choose from. So, how do you know which one is best for your child?
Well, it’s really up to personal preference and specific requirements that you want out of a seat.
First off let me give you what I consider the baseline features:
– Side Impact Protection – built into the head and body support. It is there for added protection just in case of a side-impact crash.
Many models now offer additional layers of cushioning as well that will protect your baby even further from whiplash or other injuries caused by quick stops, swerves, etc.
– Infant Support Pillows -these are great because they provide extra comfort for infants who may not feel so secure and snug with only the harness straps holding them down.
The pillows can be removed once your child gets older and more confident but it’s nice having them available when needed during those first few months. For convenience sake, I recommend getting something that has easily removable covers too if at all possible.
– Harness Straps – how many and what type of harness straps you need will depend on your seat. Some have a single strap to go between the legs, others have two shoulder straps that cross over the chest.
A combination is also common with one going across each shoulder as well as a hip buckle. In addition, some seats offer different height settings for a better fit or longer use depending on if they are rear-facing or front-facing.
– Cup Holders -These are great for parents so they don’t always have to reach back between seats just to grab something out of their drink holder. For kids, it’s also nice because they can reach back there to get their sippy cups, snacks, etc.
– Adjustable Harness – this is an important feature for child safety seats that are rear-facing because it allows you to adjust the harness height without having to rethread straps into slots in the seat itself.
This makes installation much easier and quicker which will make your life a whole lot simpler when taking them in and out of cars over time.
It may not be something you think about right away but trust me when I say it’s well worth getting one with adjustable shoulder strap heights since you won’t have enough room once your little ones grow up!
How do you unlock SnugRide Snuglock 35 from the base?
-Take off the canopy.
-Unsnap all of your buckles.
-Slide-out foot cover on the bottom of the base. The post should be at a 90-degree angle to you, with both arms pointing down toward the ground.
Make sure that it is slotted into place correctly using release buttons if needed before continuing this step. Do not use force or pull on any part of the car seat during this process because damage could occur!
How do you use the Graco SnugRide Snuglock 35?
The Graco SnugRide is a popular car seat for good reason. It’s easy to install, use and adjust – which makes it perfect if you need an extra hand when putting your little one in the car after a long day of errands.
With this rear-facing model, babies as small as four pounds can enjoy all that safe travel has to offer right from their very first ride home from the hospital.
The infant headrest adjusts easily with just one hand so they will always have support during those inevitable naps on the go! And thanks to its unique design featuring nine recline positions, parents won’t have any trouble getting them comfortable no matter how bumpy or smooth the road may be ahead.
Where should the straps be on an infant car seat?
Infant car seats should have the straps at or below the baby’s shoulders.
How do you loosen the buckle on a Graco car seat?
To loosen the buckle on a Graco car seat, first, find the release button that is located between your child’s legs. Use one hand to press down on this release button while you pull up with the other hand.
This should cause enough slack in the belt for you to unbuckle it and remove your child from their safety seat.
Once they are free of the restraint, be sure to secure them into another type of baby carrier or place them securely into an adult-sized vehicle using regular lap belts where appropriate.
To prevent injuries related to improper restraints during travel, do not use any harnesses except those designed for infant seats.
How to Loosen car seat straps Graco SnugRide 30
– Firstly, you need to remove the harness from your baby and lay it down flat on a surface. Then, locate and lift the plastic part of the strap that is attached with velcro or other fastenings beneath where your baby sits in their car seat.
It should be easy enough for you to find because how snugly they were fitted before will make them stick out like a sore thumb now.
Once lifted, pull back through so that about an inch or two extends behind this piece of material at least (preferably more). Make sure not too much unravels without cutting off any excess!
– Next, turn around to face the front again and locate the strap underneath your baby’s bottom. Un-loop it from wherever it may be attached to on either side of the seat and pull all the way through until this section is hanging free as well.
– Now that you have a better idea of where everything should be, start pulling back on every other piece of material so that they slide over each other creating slight slack in between them.
Then do another round with pulling at least an inch or two out from behind their plastic fastener again before doing one last tightening pass around any remaining pieces of material down below your baby’s legs.
– Finally, reattach harness straps under your child by following steps three and four backwards!