Washer Loud When Spinning? 5 Surprising Reasons!

Have you ever noticed your washer loud when spinning? If yes, then don’t panic. We’ve listed all the possible reasons for this problem. 

A washing machine’s ability to revolve its drum at varying speeds is one of its most essential functions. It will do this to agitate the clothing and remove moisture. The spin cycle is the quickest phase of the drum’s rotation; therefore, it should be silent. It’s a symptom of an issue when the spin cycle on your washing machine becomes extremely noisy.

The loud noise you experience, whether a pounding, rattling, or engine-like pounding sound, might help you narrow down the reason. Broken shock absorbers or suspension rods, uneven load, worn-out bearings, and a malfunctioning drain pump are the most frequent causes. Continue reading to learn about the most common causes of your washer making a loud noise while running. Let’s get started!


Why Is Washer Loud When It’s Spinning? 

It’s natural for a clothes washer to make a noise, but it must not be excessively loud. During the spin cycle, a malfunctioning washer might generate a variety of loud noises. Whether it’s squeaking, hammering, or grinding, every one of those noises leads to a different reason. We have listed some common causes of washer loud when spinning?


#1. Worn out bearings

The tub bearing is burnt out if you notice sounds when the washing machine is in spinning mode. The drum spins on the bearing, enabling it to move freely and without resistance. A loud noise will be heard as the drum turns if the bearings are damaged. The sound will get louder or worsen with time if the washer’s issue is exacerbated by the bearing. This means the bearing has gone out and is on the verge of failing.

Inadequate lubrication can sometimes cause the bearing to make a noise. Whenever the rotor spins, a squeaking noise indicates that the bearing needs to be oiled. On the other hand, a grinding sound suggests that the bearing is defective and has to be changed.


#2. Unbalanced load

To ensure that your washer runs smoothly, ensure that your laundry load is balanced evenly. Loading a washing machine in an unbalanced manner is a typical user mistake. An uneven load can result from placing so very few or having too many things and loading huge goods such as drapes. The drum will swing and strike the washing machine’s interior frame whenever this occurs, resulting in a loud pounding sound.

So because the drum is rotating at its quickest during the spin cycle, the sound is most audible. To solve this issue, make sure your laundry load is balanced every time using the washer. Throw 1 or 2 two towels on top of the cloth if it is too tiny.


#3. Worn out shock absorber

When the drum is spinning faster, it may make loud pounding noises. This occurs because the supports, such as suspension rods or shock absorbers, have aged or cracked. Consequently, the drum would not rotate evenly and would begin to strike the washer’s frame or other interior parts. This is not only inconvenient because it causes loud hammering sounds, but it could also lead the washer to break down from within. If that’s the situation with your washing, turn it off immediately and start repairing. Suspension rods and shock absorbers that are burnt out or broken must be replaced because these parts can’t be fixed. 


#4. Defective drain pump

It is an essential element that aids in removing water from your washing machine and its transport by using the hose connected to the draining system. Whenever the washer has to remove spent water and replenish it with clean water, the pump will activate numerous times during the wash cycle. After the wash program, the drain will turn on last time during the spin cycle. The drain pump starts when the drum rotates at high rates, removing water from your clothes. It’s normal for the spin cycle to make a slight squeaky noise.

On the other hand, a strong squeaky sound indicates that the drain pump is malfunctioning. To propel water from your washing machine, the pump includes rotating elements. As a result, the squeaking sound you experience is caused by a broken portion within the pump spinning and grinding against the pump’s internal components. A damaged drain pump cannot be repaired; thus, it must be replaced. You may also be interested to know about the washing machine drain pump.


#5. Worn out motor couplings 

A worn-out motor coupling, which links the motor to the transmission, is a prevalent trigger of a loud spin cycle. Some top-load washers employ these components. Over time, the connection might wear out, allowing the driving prongs to slide. Whenever the basket is rotating, this enables the driving forks to rumble against each other.


It’s A Wrap!

We hope that reading this article is just fun for you, and after reading it, you all will understand why washer loud when spinning. Loud noises from the washer are prevalent, but you need to check if the washer is excessively noisy. We have discussed all the possible causes of this problem, read carefully to understand well. Thank you, friends, for being with us at the end. You may also want to read about how to install a stackable washer or dryer and when to put fabric softener in washer.

Leave a Comment