Swivel Chair: How To Fix Uneven Swivel Chair

The swivel chair is a design that has been around for centuries, and it’s still popular today because of how much comfort it provides. However, the chair might not be as comfortable or stable if your swivels are uneven. In this tutorial, we will show you how to fix an uneven swivel chair with some basic tools!

How To Fix Uneven Swivel Chair

Steps on Fixing Uneven Swivel Chair

Step 1. Find the uneven part of the swivel by using a level. Lift one side of your chair and rest it on its armrests so that you can easily access this area without having to move anything else out of the way. If there’s an obvious problem, like two pieces swapped around or even just how tight they are, you can fix that now. If not, proceed to step two!

Step 2. Hold your level up to the bottom of one arm and use it as a guide for how much space there should be between the ground and where your swivel is resting on its pivot point. This number will vary depending on how high or low your pivot point is and how high your chair is off the ground.

Step 3. Now move to the other side of the swivel and check it against a level, just like before. If both sides are different from how they should be then you’ll need to loosen whichever screw adjusts that area up or down until you get an even number on both sides!

Step 4. If both sides are the same, then you’ll need to tighten whichever screw adjusts that arm up or down.

Step 5. If one side is taller than the other and your chair isn’t so high off the ground that it wobbles when someone walks by, you can try adjusting how much weight there is on each of those two arms. To do this, you’ll need to find the arm that is higher than how it should be and put more weight on it.

Step 6. To do this, take a heavy object (such as books) and place them directly at the centre of balance for that side of your chair so that there’s an equal amount of pressure all around where the arms are attached. The more weight you put on that side, the lower it will go.

Step 7. If both sides are uneven and your chair isn’t so high off the ground that it wobbles when someone walks by, try moving how much weight there is sitting at each of those two arms in a way opposite to how they’re currently positioned. To do this, remove weight from the higher arm and place it onto the lower one, or vice versa.

Step 8. If your chair is wobbling even when you have some of that heavy object on each side in a way opposite how they’re currently positioned (and there’s not much you can do to fix an issue like this), try adding foam padding underneath the arm on the lower side.

Step 9. If you’re still having trouble with the wobbling, there are some chairs out there that can be adjusted to have a wider or narrower stance. Some swivel chair models also come equipped with casters which allow for easier and smoother mobility around your office space if one of them is uneven.

Step 10 If none of these fixes seems to be addressing the unevenness, there’s always the option of purchasing a new chair.

How do you Fix a Wonky Swivel Chair?

Step 1. Check that the wheels are on a flat, even surface. This is less of an issue if you’re using casters or floor mats but still worth checking just in case.

Ensure your chair doesn’t have any loose parts and tighten anything up as necessary. If it’s not too late to do so, try moving your chair’s location to a more even surface.

Step 2. If you’re using casters or floor mats, try rolling your chair around in different directions on the mat until one of them seems more level than the others

Step 3. Use a spirit leveller under all four legs if it doesn’t seem like any specific leg is uneven and needs tweaking separately from the rest.

Step 4. Check the screws on your chair to make sure they’re tight and use a wrench or screwdriver if necessary

Step 5. If you are using casters, try tightening them up by unscrewing any bolts that seem loose underneath where each caster is located – The last thing we’ll do in this how-to-fix uneven swivel chair article is how to tighten up the caster bolts. This process should fix any remaining problems with your uneven swivel chair and you’ll be able to enjoy it for a long time!

How do you Tilt a Swivel Chair?

Does your swivel chair seem to have a tilt when you sit in it? You’re not the only one! Sometimes this may be caused by how your furniture is positioned. If that’s not the case, try these steps for how to tilt a swivel chair:

First of all, check how tight the screws are which keep the swivel chair in place. If they are very loose, tighten them up with a screwdriver.

Next, you’ll want to check how tight the screws at the bottom of each caster is located – The last thing we’ll do in this how-to-fix uneven swivel chair article is how to tighten up the caster bolts.

If you still have an uneven swivel chair, we recommend getting a caster cup kit to help even out the pressure on each leg. This should do it!

Leave a Comment