How to Make Replacement Cushions for Wooden Loveseat Rocker

As we spend more time at home during this period of social isolation, some of the tasks we’ve meant to complete may jump to the top of the priority list. As an example, How to make replacement cushions for wooden loveseat rocker?

Do you have any worn-out pillows that are in dire need of an upgrade? New cushion covers are a low-cost way to refresh your room and give a splash of color and warmth to a comfy wooden loveseat rocker.

 

What is a loveseat?

Loveseats are tiny two-seat couches that they initially created as a larger version of the armchair. Loveseats, also known as double-chairs, are often paired with more oversized sofas in living room or family room furniture settings. 

 

Still, their modern applications include seating in tiny areas, casual workplace break-out spaces, and cozy places to read in libraries or coffee shops.

 

Wooden loveseat rocker

A wooden rocking loveseat adds a rustic touch to the front porch of a cabin, house, patio, or garden. This loveseat has a traditional log wood structure with a medium-tone finish and will give you a spot to spend hours enjoying the outdoors.

 

Advantages of Rocking Furniture

Rocking is soothing because it releases endorphins in the brain, which improves mood and decreases stress. A wooden love-eating rocker provides a stable, familiar environment that can evoke thoughts of nostalgia and tranquility. It can even help reduce symptoms of post-traumatic stress disorder and depression due to its sensory characteristics.

Rocking increases blood circulation and helps preserve the muscular tone and supple joints, especially for seniors who receive little exercise. “Rocking chair medicine” also aids in treating insomnia by lulling people to sleep with its soothing back-and-forth motion.

Cushions for outdoor furniture are one of those do-it-yourself chores. You only need a little determination, and you’ll be fine. So, how to make replacement cushions for wooden loveseat rocker?

 

Materials Needed:

You’ll need new thick foam as well as a fabric large enough to cover the cushion in question: a marker, scissors, and sewing materials.

Foam replacement

Replace the old foam thickness with a new consistency. The old cushion was then used as a template to cut the replacement foam piece.

What You Should Do

  1. Fold the cloth in half so that the right side is facing you. It allows you to cut the cover’s top and bottom parts at the same time.
  2. Place the foam on top and trace the shape. They positioned it that way to parallel the back seat to the fabric fold and approximately 2 inches away. Once cut, the 2″ expands to become 4″ and the back of the cushion.

            If your cushion is square or rectangle, you may do the same thing, but only one side would be in the fold.

            If you have fabric with a directional design, consider how the design will line up on the cushion. For example, do you want the stripes to run across, down, or diagonally?

  1. Cut roughly 1cm beyond the drawn pattern – the extra 1cm will be the seam allowance when you sew.
  2. Cut a piece that is 2cm wider than the depth of your foam and long enough to run around the side. To make it long enough, connect two strips.
  3. Extend the length of your fabric forms. The lengthy strip will serve as a cushion cover on the wall.

If you have two distinct forms, you may measure the precise length of your strip, cut it, and connect it to form a loop. Then, with the right sides together, pin the ribbon to one of your forms and sew it into place.

Then, with the right sides together, begin pinning one end of your strip to the side of the back wall. Next, pin the ribbon around the form to the other side, but not on the second “back wall.” Sew it in place. If you choose, you may trim any extra from your strip now or wait until the cushion is within the cover.

  1. To attach the strip to the second cushion form, instead of pinning and stitching around the shape, leave a hole for rotation and then insert the cushion into the cover. Leave one entire side of the cushion cover loose and tight fit to get the pillow in, thus leaving a large gap.
  2. Pin the strip to the second form with the right side of the cloth together once again. Leave a cushion gap on the back or side of the cushion. Sew the pinned seams.
  3. Trim the seam allowance. It entails cutting minor cuts into the excess seam fabric every few centimeters around the cushion cover before turning it over. It is critical for a highly curved cushion like this one that the seams sit when turned up. Straight seams are less crucial, but even so, be sure to trim the corners. Don’t cut through the stitching, or you’ll end up with a hole!
  4. Flip through the fabric cover. Insert the cushion cover into the foam. That seems simple, but it’ll be a little tricky if it’s a good, tight fit. Just remove it slowly, so you don’t rip any of the stitches. Don’t be alarmed if you do. Once the cushion is in position, simply hand-stitch it again.
  5. Pin the opening together, gently tucking the seam allowance inside as you go, then hand-stitch the gap closed

 

Conclusion

This article answers our question about how to make replacement cushions for wooden loveseat rocker. New pillows and cushion covers may breathe new life into an old wooden loveseat rocker. 

Whether you are changing the pillows for aesthetic reasons or because you want a more comfortable environment, replacing old cushions is an inexpensive method to maintain a pleasant atmosphere.

 

Leave a Comment