How To Use Concrobium Mold Control: The Ultimate DIY Guide

In completely getting rid of mold buildup, it is handy to know how to use Concrobium Mold Control. From the name itself, it is a mold spray which aims to eliminate molds and prevent any mold growth.

A bonus of this product is it does not use harmful chemicals. Totally safe for you!

how to use concrobium mold control

However, as it comes with a pretty complex use, there are some things you need to take note of. Before you start preventing any sights of mold from appearing, you must first prevent doing little mishaps while cleaning. 

 

Safety Precautions

Before anything else, there are safety measures you must take into consideration when cleaning using Concrobium Mold Control. Remember to tick all the boxes first before diving into the cleanup itself. 

 

Clad yourself in safety gears

Concrobium may not contain harsh chemicals such as ammonia, acids, bleach or VOCs. However, you are still dealing with mold spores here. The mere inhalation of it could cause asthma or trigger any present respiratory issues in you.

Wear gloves, goggles, and N-95 masks or P-100 respirators as you come in contact with mold infested areas. If you opt to use fogging, it is all the more recommended to use safety gears to prevent inhaling excessive moisture from the fog.

To ensure further safety, you may also need to learn how to identify molds. This way, you can know if you are dealing with toxic ones that are usually connected to black molds. This article can guide you in everything you need to know about black molds.

 

Consult its information sheet

For more safety and technical information, you can consult its Material Safety Data Sheet (MSDS). You can also check out some Frequently Asked Questions (FAQs) online to gather more relevant details about Concrobium.

MSDS particularly contains information about the preparation of the product, hazards identification, ingredients used, and first aid measures ― just to mention a few. It basically serves as a guide for those who are skeptical about the usage of Concrobium Mold Control. 

 

Application Techniques

You can apply the solution through either of the following ways: spray bottle for small surface areas, brush or roller if you just want to trim, pump sprayer for large and accessible areas such as walls, and cold fogger if you are dealing with basements, attics or any other large enclosed areas.

 

Surface Coverage 

If the affected area is porous like fabrics or smooth like vinyl concrete, more of the product will be required. This is opposed to raw construction materials such as drywall, wood products and cinder blocks which are more absorbent than the former.

If you want a greater surface coverage, you can resort to fogging. A half gallon of the product will cover approximately 1,400 sq. ft. of surface area. The same goes with using a compression or garden sprayer, it can reach up to approximately 350-450 sq ft of surface coverage. 

 

Drying Time

Concrobium Mold Control typically dries in less than a couple of hours. However, there are contributing factors to its general drying time. One of which is the levels of humidity and temperature in affected areas.

For instance, you decide to paint after applying the solution, then you will most likely have to wait for a day before it completely dries. If you are fogging, make sure to open windows or any source of air to facilitate air exchange and fasten drying.

 

Frequency Of Application

Reapplication of the solution depends on the exposure of the area to water. If the surface area has been exposed to water whether it’s leaking, washing, or running water, periodically reapply the product to prevent any mold contamination.

However, Concrobium Mold Control is generally hard to get rid of as it absorbs to the surface at a molecular level. The reapplication just varies when it comes to water exposure. This means that you have to regularly check up the areas that may need reapplication.

 

Other Relevant Information

Concrobium Mold Control works with all types of molds, given that you follow the safety precautions and not skip any essential steps in its application. Whether you are dealing with a tiny mold or a huge stain, the mode of action and result does not differ.

You also do not need to mix it with water as the product does not need to be diluted. It also does not stress you about its effects on your pets and plants as it does not contain harmful chemicals. It will only negatively affect your greeneries once you specifically spray the solution on it.

 

Conclusion

Learning how to use Concrobium Mold Control might seem daunting at first, especially if you are a rookie to mold cleanup. However, this does not have to be a head-scratching situation. This guide has evidently proved that.

Overall, you just have to take note of every information spilled here. Also, you might want to reread it as a form of refresher if the problem occurs again. When you are done, this silly moldy task will not appear daunting anymore.