How To Unhook Washer And Dryer? 6 Best Tips!

Are you wondering about how to unhook washer and dryer? You should first unplug your dryer from the power supply whenever you want to unhook your dryer. It can save you from any accident after the electric supply cut off must stop the water supply so that your laundry room or your dryer and washer does not get wet at all.

Must remove all the water from the supply hose, ensure that there is no water left in the supply hose. It’s better to collect all the water in a bucket so you can use this water for cleaning or washing purpose.

how to unhook washer and dryer

When you cut off all the supplies, open the lint filter and remove all the debris. If you don’t remove the trash, put a towel in the front hole to filter or place a bucket so you can quickly move your washer and dryer. Let’s get closer to it!


Tips To Unhook Washer And Dryer

It’s not easy to unhook your washer and dryer. Each washer has at least four different kinds of hookups linked to the wall in other places. Before the washer and dryer can be taken off their groove and worked on or carried onto a loader for disassembly, you’ll need to unhook each one gently. Follow the below-mentioned tips for how to unhook washer and dryer:


#1. Switch off your dryer and washer

You know that for every electrical equipment when repaired or goes into maintenance, the first thing is to unplug them, so they become super safe from any electrical current. Remove the connection from the power first. Allowing your hands to slide under the socket and touch the iron hooks is dangerous, even if it is securely lodged and challenging to remove. To unplug from the wall, pull slowly and jiggle it if required.

Use a twisting clip or clamp to attach the plug to itself once it’s been removed. While working or moving the device, this should prevent the connector end from dragging on the surface or dropping into water.


#2. Turn off the water 

The next phase is to minimize the possibility of spillage or water leakage to the electronic components. This may be accomplished simply by turning off the water supply to your washing machine. One of three methods can be used to accomplish this. I turned off the water to the connecting valves, sealed the hookup vents, or turned off the water main altogether.


#3. Remove the drain line

A washing machine drain is often a detachable hose in the shape of a U that screws into or sits loosely into a drainage pipe that is a component of the room’s washer connections. Look for this hose and the technique for disconnecting it. You have to lift it from a vertical clear Plastic pipe in many circumstances. Set a container on the floor beside your washer before disconnecting the drain pipe. Once you remove and lower the drain line, it may not be emptied and burst out any remaining water. The container’s purpose is to keep you from making a spectacle.

Click on these links to read related articles; know how to install washer drain hose and how to fix a washer that wont drain.


#4. Detach all supply lines

The supply lines come next. These are all the cold and hot water lines that connect to the wall valves. Before you would remove the washer or dryer, you’ll need to unhook them, and because of rust and sludge accumulation over time, they’re frequently the hardest to remove. Disconnect these valves as soon as possible if you’ve not. Be prepared to use tweezers and a lot of power if they’re rusted and locked in the available spot. If they still won’t close, turn off the water farther and expect a mess.

Disconnect every supply line connector from its faucet with a wrench or pliers. It, also maybe a challenging process that needs brute effort and probably the use of a bit of loosening solution such as Dlr or a plumbing repair solution.


#5. Detach hoses from machines

If they’re fastened with clips, loosen the clamps by turning the screws on top of them clockwise. Then, point the hoses’ ends toward your bucket to remove any water. Or, you may put them in the drain in the washer’s container. Before you do this, double-check that your faucets are still turned off. Some faucet knobs are simple to turn back on by accident, and this may have happened while you moved the machine or stood behind it.

Please wait a few seconds after shutting off the valves before removing the lines since this will enable the hoses’ pressure to subside, making them more straightforward to remove.

Know how to clean dryer vent hose.


#6. Remove your washer and dryer

Ensure the washing machine isn’t connected to the wall with extra plugs or cables. Continue to move the device from its current location. There may be water within the washer. Remove the power cable or, if it isn’t detachable, tape it in place unless you’re reinstalling the machine in the exact location. This will safeguard the plug and protect the cord from becoming mistakenly yanked out when moving. To avoid losing any knobs, it’s also a good idea to take them off the machine.


It’s A Wrap!

We know that you have learned everything about how to unhook washer and dryer. The steps mentioned above are for your help so you can easily unhook your machines, but reading these steps carefully is necessary for better results.

Leave a Comment