How To Unclog A Washer Drain For Hose? 4 Easy Steps!

How to unclog a washer drain for hose? For some who may not know, a drain hose is an integral part of the machine that also plays a vital role by draining and catching the dirty water used inside the device into a sewer or drain. Since washer drain hoses are most exposed to objects blocking the hose, we will learn how to clean it now.

For some, it may be challenging since it may be their first time encountering this moment. With that being said, today, we will be learning how to do things the easier way around so that it will cause you lesser hassle while at the same time saving you some money to buy new parts in the case.

How to unclog a washer drain for hose

If one of your machines gets clogged, water may fill up the drain hose and cause the machine to break. As much as possible, we’ll want to avoid that today; without further ado, let us move on to the parts where we will be discussing the steps thoroughly. So, keep an eye on how You should do it the right way.


Steps To Unclog A Washer Drain Hose

How to unclog a washer drain for hose? Now that all the basic information about the appliance and its main component for this topic has been explained earlier, we will tackle how we should do the unclogging and all. So, without further ado, here are the steps to do that:


Step #1. Preparing the washer or the washing machine

When dealing with problems like this, water is most likely to come out from the machine, which may start a fire due to the appliance’s electronics nearby. To avoid that from happening, you should always begin by unplugging your device and placing the plug on top of the machine. Make sure that the top is not wet. Now that the machine has been unplugged, take out any clothes that may be wet from the insides of the washing machine, then get a bucket and start scooping off all the water out of the drum so that it doesn’t add on to the clogging later on. It may cause more damage if you do not get it from the machine right away.

Since you will be moving the washer away from the wall, it may be complicated or too heavy to handle if you haven’t gotten all the water out from the drum. So, make sure that everything has been put in place and that there are no garments left inside it. Once done, you can now start pulling the machine away from the wall. Why? So, it will be enough for you to get behind the machine. Thus, it will also be easier for you to deal with as the washer’s drain hose is located at the back part for those who don’t have an idea. With that being said, let us move on to the next step.


Step #2. Locating the drain hose

Step two should start by removing the plate from the machine by taking all the screws. It may vary from how it should be done but do not worry, and we will guide you on how to open a washing machine’s casing the easy way around this; no more wasting of time on how you should do it the proper way. Now that the back has been opened locate the drain hose. The drain line is the largest in diameter of the three hoses coming out of the rear of the washer and is tied to a drainpipe rather than a faucet, so it should be easy to find. Now that it has been found, we shall move to the next steps of the process.


Step #3. Checking for damages and removing the drain hose

Now clogging may be caused by damages or a defect because it has been overfilled throughout its usage. You should check for injuries to see if it is the cause of the problem. Then, remove the drain hose from the machine itself by detaching it from the drain pump. You may need tools to do that, so be ready.


Step #4. Cleaning the insides of the drain hose

Once detached, keep a bucket near the machine as water may come out of the pump when the hose has been removed from the washer. You’ll then want to remove the other end of the house from the pipe that it drains right away. Finally, you can use a stick or a clothes hanger for this step. You will use it to poke the insides as there might be clogged things in there. Push or pull all things that might be causing the blockage. Once done, replace the hose and run the washer to see if the water is cleaned and has no dirt or clogs. You may want to know why does my washer smell like mildew.


It’s A Wrap!

How to unclog a washer drain for hose? Now that you have an idea of how to unclog a washer drain hose, you can do it the easier way around with these much simpler steps that will make you’re cleaning a lesser hassle so that you can use the appliance immediately for washing your dirty garments. Also, read about how to install washer drain hose and how to fix a washer that wont drain.

Leave a Comment