Do you have any idea how to unclog a pressure washer? To unclog a pressure washer, first, you have to take away the nozzle, push the holes, rinse it, then return the nozzle. You must think that it is straightforward, and yes, you are correct! But I think you wish to have more detailed instructions to get this job done. So, dear friend, cast your worries now because you are browsing the right place.
You may wonder why the pressure washer that always got your back every cleaning time suddenly lost its performance. That may get your headache, but this problem is most likely solved in just a short time. The most cause of clogging of a pressure washer is debris found in the nozzle. If you have a pin or a paper clip at home, that will be just a piece of cake.
Of course, there might be other reasons why your pressure washer got unclogged, and that is also what we will look at in this article. We will also present you with their corresponding solutions. So, dear friend, get ready to learn while enjoying at the same time. If you want that, keep on scrolling.
Steps To Unclog A Pressure Washer
Before we answer our main query, “How to unclog a pressure washer?”, let us first dig into the root of the problem. Of course, the cause may differ from one case to another, requiring a different action. In this section, we will look at some of these causes.
Step #1. Find out the cause of clogging
First and foremost, the primary cause of clogging is debris stuck in the pressure washer’s nozzle. So, what you need to do is to clean the nozzle. But, how will you do it? When you buy a pressure washer, they go with a cleaning kit. However, some don’t, and that is not a big problem.
All you need is an unfolded paper clip. Going back to the possible causes of clogging, another one is caking. Aside from debris that may get trapped in the nozzle, components worn out with time may also feed in the nozzle. You can also consider the rubber that gets broken and disintegrate, which blocks the hose, a culprit for your clogged pressure washer.
We often use detergents as we clean with our pressure washer. Most people would think that you can use any detergent, but you must be aware that detergents may damage your pressure washer.
Some of these detergents are those that are known as high-powered detergents. If you use the wrong detergent, it may cause erosion and corrosion in some washer parts. These may get trapped in the nozzle and cause clogging. Lastly, you must always check the water coming out from the source before using it with the pressure washer. Imagine if you use dirty water; the dirt present will likely be clogged inside.
Step #2. Take action
If you have noticed, the cause of clogging makes the nozzle an essential part of the pressure washer. Why? Because there happens most of the clogging. So, in this section, we will look at the guidelines for us to get rid of the clog in the nozzle of our pressure washer.
Take out the nozzle
Be sure not to neglect this step because you should not unclog the nozzle while still attached to the hose. You don’t want to push the clog to the point where they connect. If you don’t want to get more disappointed, please first detach the nozzle from the hose once again.
Push the holes
Using the cleaner wire in your cleaning kit, push every hole in the nozzle to get rid of the debris. What if you don’t have that tool? Don’t worry, and you can use a paper clip. Just unfold it and then use it to poke the holes of the nozzles. After poking every hole, use a clean cloth to wipe every debris out from the nozzle.
Wash the nozzle with water
Put the nozzle under the faucet with running water. It is better to have high-pressure water running so that you will indeed wipe out the debris. You can also poke the nozzle’s holes as the water flows to it to be more sure. You may attach the nozzle to the hose and test if the pressure washer is functioning well. If not, then repeat the steps indicated above.
If you can’t still feel that your pressure washer is in good condition, you may consider replacing the nozzle with a different one. Also, there is another way to clean the nozzle: to use white vinegar. The clog inside the pressure washer may have become hard as stone, and vinegar does a great job dissolving stuff like this. You may also be interested to know about how to avoid pressure washer problems.
It’s A Wrap!
At the end of this article, I hope you have learned how to unclog a pressure washer. May the writings above help you in ways that you need, and be sure to keep on learning new things. Thank you so much for reading up to this point. Your time and effort are very much appreciated! You may also want to read about how to drain a pressure washer and how to clean windows with pressure washer.