How To Tell If S8 Plus Is Water Damaged: 3 Helpful Ways

The worst-case scenario for a phone owner is searching for steps on how to tell if s8 plus is water damaged. However, this article will ease these worries for you. 

 

how to tell if s8 plus is water damaged

How To Know If Your S8 Plus Is Water Damaged

Examine your gadget for the following signs of water damage:

  1. Inspect the charging, headset, SIM, and memory ports for corrosion, discoloration, or fuzzy buildup.
  2. Observe the area beneath the display screen for dampness.
  3. Determine whether the Liquid Detection Indicator (LDI) or Liquid Contact Indicator (LCI) is turned on.

To show a gadget that has not had any liquid contact, phones usually employ a white area with pink or red “X” marks. When the sign comes into contact with liquid, the “X” marks on the white field turn pink or red dirty traces.

The SIM tray is located on the right side of the phone, at the top (screen facing up). When the SIM tray is taken from the device, the Liquid Damage Indicator (LDI) is displayed inside the SIM tray slot, above the SIM frame.

For further knowledge, this article guides you on how to tell if Galaxy S8 is water damaged.

 

What You Need To Know If Your S8 Plus Is Water Damaged

To avoid further harm to the gadget, please follow these instructions:

  1. If the gadget becomes wet, carefully dry it with a clean, light cloth.
  2. Do not submerge the device in salt or ionized water. If subjected to salt water, rinse well with fresh water before drying carefully with a clean, soft towel to avoid salt buildup on the main microphone, earpiece, and external speaker.
  3. When drying your smartphone, make sure to dry the earpiece (top front), principal microphone (bottom of device), external speaker (back of device), and power/accessory (USB) interface connector with a clean, gentle fabric.
  4. When making a call after your smartphone has been wet, the microphone may have water in it, lowering the volume heard by the other person. Allow the device to air dry after drying it off before initiating a call.
  5. Chips and cracks in your device’s surface can dramatically diminish its capacity to repel dust and water.

 

How To Handle Moisture In Your S8 Plus

If moisture is detected in the charging port when the device is plugged in, it will not charge. This is a precautionary means to avoid corrosion, and you will still be able to charge compatible devices with a wireless charger. 

If a charger is plugged in while moisture is detected in the charging port, a popup message will appear.

 

1. Remove the moisture

If you decide to power your phone or tablet when the charging port is wet, an alarm will sound, prompting you to remove the charger. The alarm will keep going until the charger is unplugged.

To assist eliminate water or moisture from the port, lightly shake the gadget.

 

2. Wait for the moisture to disappear

Within 1 to 2 hours, the water in the charging port will normally dissipate. If any liquid other than freshwater gets into your device’s charging port, you must immediately rinse it and dry it completely with a dry, soft towel.

 

3. Consider using a wireless charger

Moisture or other elements in the charging port have no effect on wireless charging. You can use wireless charging to charge your gadget if it allows it.

Before using the wireless charger, ensure the gadget is completely dry.

 

4. Request assistance

Please contact a professional or visit a walk-in service facility if the preceding steps do not succeed.

 

How To Check The Liquid Damage Indicator In S8 Plus

To perform these steps, you’ll require the ejector tool that came with your device as well as a flashlight.

 

1. The card tray should be ejected

Turn your phone or tablet off and place the ejector tool in the little hole next to the SIM/MicroSD tray. The tray will be ejected.

Please remember that the SIM/MicroSD tray will be located differently based on the device.

 

2. Examine the SIM/MicroSD card slot

Light up the SIM/MicroSD slot with your flashlight. The LDI will be solid pink, purple, or red if the gadget has contact with moisture; service is necessary in this situation.

The LDI will be pure white or solid white with pink or purple Xs if the gadget has not been subjected to dampness.

 

3. Request assistance.

Your phone or tablet will need to be repaired if it has been subjected to fluids. The limited warranty does not cover such, but you can still schedule a service visit.

Check out the Support Center for service choices.

Many s8 plus users would want to believe that submerging their device completely protects it from water. While this may be acceptable for devices with fully functional water protection (which there is no way to verify), some users may discover damage has already occurred. 

Never utilize your phone underwater as a safeguard! There are currently no smartphones that are completely waterproof, so don’t test the limits of your device’s waterproofing.

If you are in dire need of the data stored in your phone, check this article on how to retrieve data from a water damaged phone

 

Conclusion

Knowing how to tell if s8 plus is water damaged is a must-know for its users. Not only does it prevent you from further damage, but it also avoids spending more bucks.

Leave a Comment