How To Start A Mr Heater? 3 Easy Steps!

Do you want to know how to start a Mr Heater? Knowing how to start this device will help you determine if your newly purchased device performs the way it should or heat spaces. Mr Heater is a propane heater that you can carry wherever you go, indoors or outdoors, and easy to bring along.

In the winter season, it’s hard to go outside because it’s freezing and cold. We cannot do our daily routines outside. Today, there are portable heaters you can carry out. This article will guide you in starting the Mr heater. If you’re confused, don’t worry about operating that device. In addition, there are tips and essential information you can use to maintain your appliance performance over the years. Are you ready, my friend? Let’s dive in!

how to start a Mr Heater

 

What Are Portable Heaters?

Portable heaters are heaters you can easily carry in places you would like to go. Suppose you’re going camping or fishing, and the weather is a bit cold than usual, but you don’t want to postpone your plan. A portable heater can be the best option. You can produce heat and prevent yourself from too much cold outside. 

The only disadvantage you can uncover is that this appliance is a portable heater which means you have to bring extra canisters, and using a 16.04 oz propane canister can give you heat in one and a half to two hours only. So, if you are planning to go out for more than that, you have to carry a propane canister, dod thing that they are small and too heavy. Let’s learn how to start your Mr Heater, don’t worry as this article will guide you from top to bottom. Let’s start! 

 

Steps To Start Mr Heater

Learning how to start a Mr Heater properly will maintain the performance of your portable heaters. Hence, you are required to follow them correctly. Aside from keeping your heater, improper usage or start-up can lead to physical injury or start a fire. To prevent this, you must follow the safety instructions written in your product’s manual and warnings. On the other hand, read and follow each step below to begin the steps.

 

Step #1 Check the appliance

You need to check your device for any shipping or damages, especially if you ordered the item online. Remove the item from the box and check if your order arrived safe and had no damage. Meanwhile, if you bought or planned to purchase these heaters, study the item or request a test before paying for them. In addition, read your owner’s manual for safety and warnings before operating the heater. 

 

Step #2. Set the heater

Similar to other heaters, ventilation is a must. Even though this type of heater is portable and can be used indoors, but must have proper ventilation and be away from combustible objects. To set your heater, place it on a flat surface and must be free from flammable materials or ignition sources. Ensure it has a freeway above at least 30 inches, 24 inches on the front, and 6 inches on both sides. 

Before installing the propane cylinder, check if the control knob is in the “off” position. After setting it on the “off” position, swivel the regulator upwards to insert or attach the propane cylinder inside the heater. Attach the cylinder by screwing it on the regulator by turning it on clockwise. After connecting the propane, inspect the tank thread to see if it’s aligned with the heater thread. 

 

Step #3. Light the heater

To light the heater, first, we need to pilot the heater. Press the control knob and turn it counterclockwise and point the knob in the “pilot” setting. Push the knob for at least 30 to 60 seconds to allow propane to travel from the tank to your heater. Repeat until the heater is lit. Press the knob down for 30 to 60 seconds, then check if the pilot light is turned on. Turn the control knob and put it in a “high” position if the light is already on. Wait until the burner tile in your heater turns bright orange, then set your desired temperature. You may also be interested to know about common Mr heater pilot light problems.

 

Tips In Using Portable Heaters

After you use the heater, make sure you store it properly. Be cautious, as the wire guard will take time to cool them. To turn off the heater, push down the control knob slightly and turn the knob in the “off” position. On the other hand, some heaters support a tip switch. This switch automatically turns off the heater if the device is tilted more than 45 degrees. The tip switch is also used to shut down the heater correctly. So please read your manual about the proper way to shut down your heater.

 

It’s A Wrap!

Now that you have learned how to start a Mr Heater, you can turn on or operate your portable heater on your own! Isn’t that amazing? Learning how to start this device will help you enjoy the outdoors even the weather is cold. Hope this article helps and answers your question regarding the portable heater. You may also want to read about what is the best type of heater for a room and how to make a heater without electricity.

Leave a Comment