How to Sew Cushions For Wicker Loveseat
Need some new wicker loveseat cushion covers but can’t seem to find what you’re looking for at a reasonable price? DIY pillow covers are fantastic since they are a fraction of the cost of buying them. However, how do you sew cushions for a wicker loveseat?
Even if your wicker loveseat cushions are in satisfactory condition, covering them will allow you to alter the color and pattern for special events or simply on a whim.
What is a loveseat?
A loveseat is one of two kinds of two-seat chairs. One kind, known as “British two-seaters,” is virtually equivalent to a “two-seat sofa.” They usually equip it with two upholstered seats.
Another type is a tête-à-tête, courting bench, a kissing bench, gossip’s chair, or conversation bench. Finally, any type of two-seat furniture in which the two seats are in an S shape.
It allows two people to converse while looking at each other and being within arm’s reach while typically retaining a modest barrier between them.
It was to accommodate the broader dresses that were popular at the time, and these began to be marketed and sold as “loveseats” in the early 1800s.
Wicker Loveseat
Traditional easy-maintenance wicker loveseats are ideal for porches, decks, patios, and other open spaces because they provide true comfort and long-lasting sturdiness. Its simple lines and classic elegance will appeal to you.
Easy-care wicker provides an appealing, high-quality choice at an affordable price. The most significant thing is that low-maintenance wicker furniture is hand-woven from all-weather resin on robust, powder-coated steel frames for long life and little maintenance. Store it in the off-season to extend its life.
Are you ready to thread your bobbin and work your furniture magic? Here’s how to sew cushions for wicker loveseat, whether they’re for your porch, back deck, or inside your house.
Step 1:
You need a fabric of your choice, a zipper, a cushion filler or a foam, a sewing machine, and sewing materials. First, I measured the width and depth of the loveseat to determine the size of the cushions.
Step 2:
Next, select the height of the pillow by the size of the cushion foam or filler. Finally, scale the width and depth measurements by 1 inch to allow for a 1/2′′ seam allowance all around when determining the fabric measurements for the cushion panels.
These dimensions are for the cushion’s top and bottom sections.
Step 3:
Add the original measurements (the numbers before the extra inches for seam allowance) of all four sides of the large panel together to get the side panel length. Then, add 1 inch to that huge figure to provide for a 1/2 inch seam allowance.
The height of your side panel is the same as the height of the cushion filling plus 1 inch for a 1/2′′ seam allowance.
Take these measurements and cut your top and bottom panels and your side panel to fit.
Step 4:
You round the corners of your fabric on your two more oversized panels with fabric scissors. Fold the panel in half (right sides facing each other) and sew 1/2′′ from the edge to link the ends of your long side panel strip to form one substantial continuous loop around the perimeter of the cushion.
Line up the borders of the side panel fabric loop with the edge of the top panel (right sides together) and pin the trim in place. Add small “V”-shaped notches on each corner to help make sewing the corners simpler.
Sew around the edges with a 1/2′′ seam allowance on your machine. Then, pin the bottom panel to the side panel to pinned the top panel and cut notches in all corners.
Step 5:
Before sewing around the bottom panel, add a zipper at one end to allow you to insert the cushion stuffing. Place the zipper facing down on the right side of the cloth at one of the bottom panel’s ends. Pin the zipper in position so that it is 1/2 inch away from the edge.
Sew the right side of the zipper in place with the zipper foot on your machine.
Step 6:
Repeat the pinning and sewing process on the opposite side of the zipper. It completes the installation of a working zipper. You may now stitch around the bottom panel (starting at the end of the zipper and stopping when you reach the beginning of it).
Make careful to leave a few inches of the zipper open before sewing all the way around so you can get back in later! Then, turn your cushion cover right side out, and you’re ready to fill it!
Step 7:
Finally, through the zipper opening, place the cushion filler into the cushion cover.
Once you’ve achieved this cushion-making process, you’ll not only be able to refresh your wicker loveseat, but you’ll also be able to apply the techniques to creating cushions for a variety of other sitting options.
Conclusion
That’s a wrap! We hope we answered your question on how do you sew cushions for a wicker loveseat.
You can use cushions to finish off a loveseat, couch, or any other piece of furniture. They may tie together a color scheme, offer exquisite textures, or provide a beautiful splash of color to revitalize the area.
If you buy them on the high street, you will never be able to find the ideal fabric to match your current color scheme – make your own, and you will be able to construct cushions with the appropriate material.