How to Sanitize a Bob Stroller: 6 Easy Steps

Many parents rely on their strollers to be a haven for their children. If it is not clean, how can you trust that your child will be in any less danger than they would have been while riding in the car? The key to keeping your stroller clean is by taking care of it from the moment that you get home.

This article will discuss how to sanitize a bob stroller so that you can feel good about where your child is spending time!

How to Sanitize a Bob Stroller


Steps on Sanitizing a Bob Stroller

Step 1. Empty the stroller and remove any toys, blankets or other belongings that you want to keep safe from being washed. Remove the fabric seat cushion as well if it is removable.

Step 2. Boil a pot of water and pour some into your sink’s basin, then add in about two cups of liquid laundry detergent for an extra boost.

Step 3. Be careful not to get too much soapy water on the floor! Place your stroller back inside one side at a time with all four wheels facing down towards the ground; this will help prevent scratches during washing.

Step 4. Make sure that no loose parts are hanging over outside edges before closing up the top flap – such as straps for carrying bags or food pouches etc., which might get snagged on the way through.

Step 5. Place your bob stroller inside a laundry bag or in a large, sturdy trash bin. Fill it with the hot water and detergent mixture – try to use enough so that the pieces are completely submerged; this will help keep them sanitized while also preventing rust from forming after washing!

Step 6. Close up any openings using sufficient heavy objects (such as bricks) to weigh down parts of your bags/bin that might be flapping around during transport. Leave for about an hour before removing and placing back on dry surfaces to absorb excess moisture before usage again later.


How do you clean an old Bob stroller?

One way to clean an old Bob stroller is by placing it in a laundry bag or trash bin. Fill the washing machine with hot water and detergent, then submerge the pieces of the stroller so they can be sanitized while preventing rust from forming on metal after being washed.

Close up any openings using heavy objects such as bricks to weigh down parts that might flap around during transport. Leave for about one hour before removing and place back onto dry surfaces to absorb excess moisture before use again later.


How do you tune up a BOB stroller?

One way to tune up a BOB stroller is by taking the front wheel off and putting it back on again. Inspect how well all wheels are moving, if any parts seem loose or damaged then make necessary repairs using a screwdriver.

Lubricate the axle with grease or oil as needed, though not too much so that excess material gathers in one spot on the axle’s surface area. Replace worn-out tires if needed – this will provide smoother rides for your child without making unnecessary noise from bumpy roads and sidewalks when you’re pushing them down outside.


Why is my BOB stroller pulling to the right?

The stroller may be pulling to the right because of how it is assembled. The axle is not centred in the wheel, which will cause uneven or wobbly wheels when you push your toddler around on them. You can tell that this issue exists by inspecting how far off centre the front tire looks and how much resistance there seems to be from pushing a little too hard.

To fix this problem, take out all four tires before adjusting where they are placed within their frames so that each side has an equal amount of space for movement without causing friction with one another during use.

There could also be other reasons why your BOB might pull to the right besides how its configured – such as if any parts are loose or broken (ex. the hinges for how you put in and remove the seat) if any screws are out of place or not tightened, how tight everything is (ex. how tightly connected your front wheel axle nut might be to its frame) or even whether a tire needs air

If it looks like there’s no other issue besides how aligned these parts are against one another then try this: after putting on all four tires again from where they were taken off, check that each side has an equal amount of space between them by pushing down with both hands while standing behind the stroller so that left meets right and vice versa

This should result in uniform movement across every surface touching when you push straight ahead of you which means – voila! – that your stroller is in alignment.


How to Remove Rust off a BOB stroller

If you have a BOB stroller, then it’s important to know how to remove rust off the frame. Rust is normal for any type of metal and can be treated in various ways. Here are some tips on how to get rid of that pesky rusty mess:

Step 1. Fill your bathtub with water just enough so that the stroller will fit inside – not too high or low

Step 2. Add three tablespoons of dish detergent (enough for good suds)

Step 3. Let sit for around 15 minutes; rinse well under running tap water

Step 4. If there are still stains after cleaning, scrub them gently using a sponge with steel wool soap pads before rinsing again. Finish by wiping down with a soft cloth

Step 5. To prevent rust in the future, wipe down metal surfaces with a dry cloth to remove any moisture. Maintain your stroller’s cleanliness by washing it every month or two


Leave a Comment