How to run a pressure washer off a water tank? All you need is a water tank leveled or placed higher than your pressure washer. Then, you can expect 8 gallons of water to come out of your faucet.
Many people tend to forget that when using a water tank for the water supply, the water tank must be placed level or higher than the washer. Therefore they have problems with using the pressure washer.
I also had the same problem once, but after some research and experiments with my equipment, I found the right way to use these things and how they should be operated. So stay tuned, and let’s get started.
Water Tank and Pressure Washers
So why do you need a pressure washer anyway? Well, a pressure washer shoots water at an incredible speed, and that pressure causes the dirt to come off the surface you’re cleaning. But before you do so, you’ll have to understand first how the two works as a system. I know everyone who searches about this is probably familiar with modern pressure washers but doesn’t know how to handle one. Although using these is a breeze once you know how this thing works
Connecting The Pressure Washer To The Tank
Setting the pressure washer with the tank properly is the key to the success of your work. Doing so will also ensure that the pressure washer will get the right amount of water in need to shoot out.
It is just like feeding your machine; if you cannot provide proper food, it wouldn’t improve service. The same thing applies to pressure washers; the more influential the washer is, the more GPM or Gallons per Minute needs much water supply, or you won’t get your desired pressure.
So without a sufficient supply of water, don’t expect your washer to perform its best service. For example, if your pressure washer has 5.0 GPM but is connected to a regular faucet, it can only go for as much as a 2.0 GPM machine.
Step #1. Connect the threaded to the fitting
The first thing you must do is look for a banjo fitting located on the tank. Then, connect the thread to it. Next, add an inline to the PVC and secure them with Teflon Tape.
Step #2. Connect a ball valve
Some tanks have a ball valve and barb connectors, so check if you have them. If not, you can buy a barb connector online. The barbed connector will help keep the water leaking from the tank.
Step #3. Connect the hose to the pressure washer
After securing the barb connector, it’s time to attach the hose connected to the pressure washer feed line. The feed line is usually found somewhere besides the inlet for the garden hose. Here’s how to repair pressure washer hose.
Ways To Run A Pressure Washer Off A Water Tank
Now, sometimes we experience delays or electricity outages like blackouts, so if you wonder how to run a pressure washer off a water tank even though there is no electricity, then the answer is, yes, you can. In actuality, it doesn’t matter what kind of pressure washer you have. Whether gas or electrically powered, you can still run a pressure washer on your water tank.
Running a pressure washer is not that complicated. You’ll have to provide a water tank close to the machine you’re using. On that note, a portable tank is perfect for the task as you can carry it all around while you work. A tank has a pump that puts pressure on the water, forcing it out of the spray wand. However, you might also have to pay attention to the type of nozzle you use since it can affect the pressure you want.
Some pressure washers have three types of nozzles included in the unit: the detergent spray nozzle, a flushing nozzle, and a blasting nozzle, which are of different use.
The detergent spray nozzle is used for cleaning wide spaces on roads and path walks. On the other hand, a flushing nozzle is used for general cleaning. At the same time, a blasting nozzle is used for cleaning deeply stained areas. Click on this link to know how much water does a pressure washer use.
Troubleshooting Pressure In Pressure Washers
There may be times where you can’t get the right amount of pressure that you want. Don’t worry as there are some ways you can fix this problem. The problem may be from the pressure washer connecting valves.
You can start troubleshooting by checking if the hose connections are all tightly sealed enough to seal the pressure in. After making sure that the connections are tight, you can check the spray wand. Some spray wand comes with adjustments like no pressure or low pressure. Double-check the spray wand’s pressure settings. Next is to check the pressure tank faucet if it is already turned on.
You may also have to adjust the pressure rate and spray settings to get your desired pressure. Set these correctly and after checking all of these, try using the pressure washer again. These should solve your pressure problems. Here are maintenance and troubleshooting tips.
It’s A Wrap!
Now that you know how to run a pressure washer off a water tank, I hope it saves you the hassle of looking for other water supplies to power your water needs. Just remember that you’ll need more supply for a more sufficient and high-performance pressure washer.