Comprehensive on How to repair Sticky Stroller Wheels

This blog post will teach you how to repair sticky stroller wheels so that this never happens again!

How many times have you been out with your children and the stroller has stopped moving? How frustrating it is to see your child be forced to sit in an uncomfortable position while you try to find a way for the wheels to turn again.

How to repair Sticky Stroller Wheels

It’s even worse when you can’t get them unstuck! The problem is actually a relatively easy fix, but it can be hard if you don’t know-how. 


Steps on Fixing Sticky Stroller Wheels

Step 1. First, you need a screwdriver and an old towel or paper towels. You’ll also want to get the stroller as level with the ground as possible before trying this fix. The key is for it to be perfectly even so that gravity can help us out!

Step 2. The next step in fixing sticky stroller wheels is taking off any caps on either side of the wheel axle. This just makes sure there isn’t anything extra in the way when we are placing our towel down onto it…

Step 3. Now place your folded up towel over top one of these axles (the bottom ones next to where your child’s feet go). Be careful not to slide them too far down because they will fall into their compartment below which may lead to a lot of spills.

Step 3. Now take your car jack and place it under the towel that you placed on top of the wheel axle, but make sure to keep a good grip on both ends because this could be very tricky!

Step 4. You want to slide the car jack towards each other until there is an inch or two between them (depending on how far apart they are). The wider distance will allow more stability for moving around when pulling up with all your might.

Step 5. Go ahead and pull upwards at either end to bend the metal back into shape – doing this simultaneously can help reduce some strain in just one arm/hand if needed. It should feel like you’re bending a piece of paper back into shape that’s been crumpled up.

You should feel a “pop” as the metal bites back into place and you’ll see that your wheel is back to being round! How wonderful is that?


How do I fix My Uppababy Wheel?

Step 1. Remove the wheel from your stroller and place it on a flat surface with some weight.

Step 2. Apply pressure in one area of the wheel to make an indentation, then apply pressure perpendicularly (at right angles) to that spot. You should feel a “pop” as the metal bites back into shape and you’ll see that your wheel is back to being round! How wonderful is that?


How do I fix Sorel Snow Boot Wheels?

Try rotating them by hand: if they move easily without much resistance, try lubricating them first with cooking spray or hair oil before trying again for better results. If this doesn’t work, there may be another issue going on – please contact our customer service team for more information.


How do you Unlock the Wheels on a UPPAbaby Stroller?

The wheels on UPPAbaby strollers can be unlocked by pressing the two release buttons located at the back of each wheel.

Do you need to use different types of lubricants for your snow boots? How do I know what kind to choose?

In most cases, no – typically all that is needed is a silicone-based product or spray which will help protect and keep them fresh out in snowy weather!

How often should one apply this type of treatment though? It’s recommended that they are applied every few weeks during winter months if used daily or as desired. This would also depend on how often it rains where you live too, but some people may find themselves applying more than others depending on their activity level.


How do I fix my UPPAbaby Cruz Wobble?

The wheels on your UPPAbaby Cruz are likely out of alignment. You’ll want to take a look at them and see if they need to be tightened up in some way or another, but these instructions may also apply:

Step 1. Find the wheel with loose nuts and tighten it by hand until snug; then use an adjustable wrench for extra torque (don’t overdo it)

Step 2. Repeat this process for any other loosened nut found on that xxx wheel – don’t forget!

Step 3. Once all nuts have been tightened, place the bike on level ground with the front tire facing straight ahead. Turn handlebars from side to side as you roll forward slowly watch for any wobbling motion created by either one of the two front tires.


What’s the difference between the UPPAbaby Cruz and Vista?

The UPPAbaby Vista and Cruz are both great strollers, but they differ in their features. The main difference between the two is that the UPPAbaby Cruz only weighs 15 pounds, while the UPPAbaby Vista weighs 22 pounds.

This may not seem like much of a difference and it’s really up to personal preference which one you would want to purchase for your family!

Most importantly though, be sure to check out all our reviews on these products before purchasing anything! We’ve got tons of different models listed over at

Leave a Comment