How to Repair a Lazy Boy Recliner Mechanism

Do you have a Lazy Boy recliner that refused to budge? Maybe the mechanism is getting stuck or something else has gone wrong with it.

No need to worry, we’ve got your back. We’ll show you how to repair a lazy boy recliner mechanism so that it’s as good as new again!

 

how to repair a lazy boy recliner mechanism

Steps on Repairing Lazy Boy Recliner Mechanism

Step One: Remove the Mechanism from the Chair

In order to repair a lazy boy recliner mechanism, you’ll need to remove it first. This will help you get access to any parts that may be broken or loose. To do this, follow these steps:

Unscrew and take out all of the screws that connect the frame of the mechanism to the chair. These should be found at points X, Y, and Z on each side (see diagram).

Place a screwdriver under one of the metal pieces that are still connected with screws from step one (point A)

Pull this piece up while sliding it towards you. Then remove the screw that this metal piece is connected to (point B)

Repeat the process on all three pieces. Once you’ve done this, you should be able to detach the mechanism from the chair easily.

 

Step Two: Remove Broken Parts and Perform Minor Repairs

If there are any broken parts of your lazy boy recliner mechanism that you want to replace, this is the time.

 

Step Three: Attach New Mechanism and Reassemble Chair

Once your broken parts have been replaced, it’s time to attach the new mechanism back onto the chair. The process for doing this should be similar to step one; however, there are a couple of steps that will be different.

 

Step Four: Test Chair and Reassemble

Once the chair is reassembled, give it a test by pressing down on both sides of your recliner to make sure that everything works as expected before you finish assembling the mechanism back onto the chair. If there are any problems with how it operates, now is the time to fix them.

 

Step Five: Replace Screws and Reattach Armrest

Replace the two screws on each side of your armrest, making sure that they are very tight and not loose or wobbly.

 

Step Six: Test Chair Again (Optional)

If you did step five last, then this step is optional. However, it could be a good idea to repeat step five now just in case you missed any issues during the first test.

 

Step Seven: Replace Screws and Reattach Cushion

Replace the two screws on each side of your cushion, making sure that they are very tight and not loose or wobbly.

 

Step Eight: Test Chair Again (Optional)

If you did step seven last, then this step is optional. However, it could be a good idea to repeat step seven now just in case you missed any issues during the first test.

 

What is Lazy Boy Recliner?

A recliner is a chair with the ability to lean back in various positions. The most common type of recliner has two upright sections that can be extended outwards, so they form an “L” shape when viewed from above. In this position, you are able to lay down backward and enjoy your favorite movie or TV show.

 

How to Prevent Wear and Tear on Lazy Boy Recliner Mechanism?

The following steps will help you prevent rust and wear on the lazy boy recliner mechanism.

Step One: Clean Mechanism with a Damp Cloth (Optional)

Cleaning can prevent dirt build-up from accumulating over time, leading to unnecessary friction that may affect how your mechanisms work.

Plus, it’s much easier for dirt to get into your recliner mechanisms if they’re dirty. Simply wipe them down with a damp cloth or paper towel (if you decide not to clean the mechanism, skip steps two and three).

Step Two: Dust Mechanism With Mild Detergent

Dish soap works well for this task. Mix it with water in a spray bottle and apply a light coat of the solution onto your lazy boy recliner mechanism. Allow it to dry for about an hour, and then use a clean cloth or paper towel to wipe away any dirt that would have otherwise clung to the metal

Step Three: Polish Mechanism (Optional)

If you want your lazy boy recliner mechanism to have a shiny new look, then you’ll need polish. Apply the polish in the same way that you applied dish soap  but allow it to dry an hour before wiping off with your cloth or paper towel

Lazy Boy Recliners are built strong and meant for lots of use. However, if they’re not taken care of, they can get a little dirty and even malfunction. 

 

How Much Does it Cost to Hire a Lazy Boy Recliner Repairer?

The price to fix a lazy boy recliner mechanism depends on how much time and work the company estimates it will take. You can also check with your local handyman or appliance specialist if you’re interested in trying to tackle this repair yourself but be warned, replacing parts is expensive!

 

Can I Wash my Lazy Boy Recliner?

Yes, you can. Lazy Boy recliners are fully washable and care should be taken to avoid getting the seat too wet as this could cause damage. If it’s been a long time since the last cleaning of your chair, there may be some residues left behind from dirt or dust that didn’t get cleaned away when it was last washed.

To remove these, use a damp towel to wipe the surface of your chair clean and then dry it off thoroughly with a soft cloth or paper towels (wet wipes won’t work for this).

How to Fix Lazy Boy Recliner Mechanism?

To fix the lazy boy recliner mechanism – first, unpack the parts from

No more posts found in this category.

[mailpoet_form id=”2″]