An unattractive jacuzzi tub with black mold can become a health threat. When you know how to remove black mold in jacuzzi tub, you can prolong the life of your tub.
Contrary to popular belief, jetted tubs are prone to mold growth in the same way bathtubs expose other surfaces to high amounts of moisture. However, what is the most effective method of removing mold from a jetted tub?
In this article, we will discuss the solution that we have found.
Mold can be harder to eliminate from a jetted tub, primarily if it has been present for an extended period (such as many weeks). To begin with, you must determine which mold removal method is most appropriate for the job at hand.
What Does Black Mold Look Like?
When it comes to black mold, as the name says, it is frequently very dark in color. When looking for black mold, search for circular-shaped patches that are dark, deep green, or dark brown and have a spongy texture.
Sometimes black mold can take on orange hues or have specks of white visible inside it and black. Like other varieties of mold, you may typically find black mold in gloomy, damp parts of homes, where it thrives.
It emits spores into the air, which you can either ingest on your skin or inhale through your mouth. These spores can also be transported from one location to another, spreading the infection across your property.
One of the most typical health problems associated with black mold is respiratory problems. After being exposed to black mold spores for an extended period, you may feel coughing, runny nose, and an itchy throat.
Individuals at elevated risks, such as infants or those who already have respiratory disorders, may suffer long-term health implications from this exposure.
Here’s a comprehensive guide on how to identify black mold to help you understand it more.
How To Kill Black Mold In A Jacuzzi Tub
Step #1. Drain your jacuzzi tub
Begin by draining any liquid that has accumulated in the tub. It will remove any germs, filth, and leftovers from household cleaners applied before.
After that, use a paper towel or a wiping cloth to wash away any leftover residue. Make sure to wipe down the area all around the jets and the base of the bowl.
For large amounts of material in the tub, you may also want to consider utilizing a wet-dry vacuum to eliminate it as fast as possible.
Step #2. Spray mold solution
It will help if you spray the cleanser immediately on the basin and around the jets, where mold is most likely to grow. If you’re concerned about the tub’s faucets and drainage, you’ll also want to consider these areas.
There are a few alternatives available to you in this following phase. As an alternative, you can use a professional cleaner to remove the mold.
If you’re going to use a commercial cleaner, make sure you follow the label’s advice and apply it directly to the areas of concern.
Step #3. Wipe the sprayed area
Use a tiny washcloth or brush to gently scrape away mold from impacted areas, including the jets, pipes, and drainage, before spraying the mold removal treatments to the tub. Wipe down the areas you’ve sprayed with a clean cloth after you’ve finished.
Most build-up should be simple to eliminate, but pay careful attention to any problem spots that may have developed. While working, make sure you wear gloves and take precautions to ensure your eyes and skin are safe.
Here is a helpful guide on what kind of respirator you need for a mold.
Step #4. Switch off induction valves
After that, shut off the air induction valve so that water may only flow through the connector tub’s internal system. The jetted tub’s inside can be thoroughly cleaned with this high-pressure water flow.
Cycle the jet for 7 to 12 minutes with the valves closed until the water is clear of any particles. Remove the excess material by draining the tub one more.
Once you’ve done that, refill the jacuzzi tub and do it all over again.
How to prevent mold in your jacuzzi tub?
As long as you keep your tub protected when it isn’t in need, make sure your filters are maintained and changed continuously, and observe all of the directions for inspection and measurement provided by your water care system.
Mold grows in areas with high humidity. Although it is challenging to eliminate humidity from your home, you may lessen the dampness in your bathroom by adding a ventilation system and opening the windows for proper air circulation.
For old jacuzzi tubs, it’s a smart option to fill them with water, drain them and clean them before refilling to make sure you’re beginning with a clean and hygienic tub.
Conclusion
You can easily follow the steps on how to remove black mold in jacuzzi tub by creating a cleaning program that includes both primary and thorough cleaning. Monitor the water supply regularly, and be cautious of any products that may contain toxins in the jacuzzi tub’s water since these can enhance mold risk.