A metal swivel chair is a great way to add some flair to your home office. How many times have you seen one of these chairs in an office setting? They are almost always black or silver, but why not change it up and make yours green! This blog post will walk you through the steps on how to re-paint a metal swivel chair.
What is the Best Craft Paint for Metal?
The best craft paint for metal is metallic spray paint. It will give the chair that extra pop! If you don’t want to buy it online, your local hardware store should have it on hand. They are usually priced at about $15 per can and last up to two coats.
Steps on Re-Painting a Metal Swivel Chair
Step 1. Prepare your metal swivel chair for paint by either stripping it with a chemical stripper or sanding it to remove the old finish.
Step 2. Clean the surface of the metal swivel chair and let it dry before painting.
Step 3. Paint away! How does this colour sound? If you decide on the green, mix in some white for a lighter green. How about some yellow for the metal parts of your chair, such as screws and rivets?
Step 4. If you don’t want to spend too much time on this project, paint one side or part of it with different colours. This will give you an ombre effect!
Step 5. Allow plenty of drying time between layers of paint, and use a good quality primer to seal the metal swivel chair before painting.
Step 6. Apply two coats of topcoats for extra durability.
What type of Brush do you use for Metallic Paint?
A foam brush is perfect for metallic paint. A soft-bristled metal brush does the trick, too! How do you know when it’s time to add a topcoat?
If your chair looks glossy and new right out of the can or if every stroke leaves behind crisp edges with no smearing, you’re good to go.
How do you Make Metallic Paint Shiny?
You can bring a little more shine to your metallic paint job by applying clear acrylic varnish on top.
How do you Know When the Metal Swivel Chair is dry?
The paint will be completely dried after 24 hours of drying time. Allow plenty of drying time between layers and use a good quality primer to seal before painting; this will help the paint adhere to your metal chair.
The best way to find out if it’s time for an additional layer of the clear coat or not is by gently stroking the surface with your finger and seeing how much gloss comes off on your skin.
How Should I Clean my Painted Metal Swivel Chair After it’s Finished?
You should never submerge painted metal chairs in the water. How to clean a metallic paint job is by using non-abrasive products like soapy water and soft cloths, or natural-based cleaners for wood furniture.
Once you’re done cleaning your swivel chair, just allow the area to dry.
How Should I Maintain my Painted Metal Swivel Chair?
You can help keep your paint job looking fresh by applying a thin layer of clear coat every few months, or at least once per year if you use the furniture frequently.
How often do I need to refinish a metallic paint finish is dependent on how much time the furniture is sitting in direct sunlight. Areas that are exposed to the sun, like a porch or deck, will need more frequent care than those pieces of furniture that only see indirect light.
Do I Need to Prime Metal Before Painting?
You can prime your metal swivel chair with an oil-based primer if you are using latex paint.
If you want to use acrylic or water-based paint, then it is not necessary to prime the metal swivel chair before painting.
Should I Sand Metal Before Spray Painting?
You can sand the metal swivel chair if you want a smooth surface to paint, but it is not necessary.
How do you Apply Metallic Paint to Metal?
- Apply a base coat of metallic paint.
- You can apply the second coat to achieve more opacity, but it is not necessary if you want an all-over shiny finish.
How do I seal my metal chair after painting?
Spray your metal swivel chair with clear acrylic varnish or a clear gloss water-based paint.
What colours can I use to repaint my metal chair?
You could also try silver metallic paint for a more interesting and modern look on your swivel chair. Other options include gold, bronze, or black matte finish. Personally, Lola would recommend silver metallic paint for a more interesting and modern look on your swivel chair.
How do you prep metal before spray painting?
- Prime the metal swivel chair with an oil-based primer if you are using latex paint.
- Apply two coats of topcoats for extra durability.
What kind of paint do you use on metal chairs?
Choose a paint that is specially formulated for metal. Here are some brands to look out for Rustoleum Hammered, Krylon Mirror Finish, and Sherwin Williams Pro Classic Metal Paint.
A small can of flat black spray paint will do in a pinch.
If the chair is suspect of rust, try using a metal primer.