Welcome to the Krostrade Marketplace, please excuse our appearance, we are still under construction.

How To Put Two Curtains On One Rod? In 5 Easy Steps!

How to put two curtains on one rod? In just five easy steps, you can! I guarantee you can do all these things in a breeze.

Yes, this question might confuse you, but it is the one that you usually do as to how you would want your curtain.

Some prefer putting just a single piece of the curtain on their window, but two look more elegant.

Another is that you will need ideas and tips on how you can do it right.

The process may seem easy, but then there are many things you will need to consider such as:

The choices of fabric, rods, and a lot more.

Do not worry because I will keep you company.

Steps are detailed and precise throughout this article, so I am hoping that you learn from them.

 

How to put two curtains on one rod

Steps To Put Two Curtains On One Rod

Before we proceed to the steps, I hope you had an idea or experience doing this one.

If you do not have one, it’s alright. I can help you with it. You will need only paper and a pen to take down.

Or you can take a screen capture later on. But then again, your choices and preference are always valid.

Let us now end that confusion and question you have on top of your head, how to put two curtains on one rod?

 

Step #1. Grab your materials

One of the most important things you should do is make sure you have all the necessary materials.

The things you should prepare are the hook on the wall, the rod, and of course, the two curtains that you will be using.

You have to make sure that the hooks are proportional on both sides and hold your rod.

Upon purchasing those two things, you have to make sure that your rod can fit in the area of your hook.

Or else you will have to buy another set, and it will just waste the money and energy you used after your purchase.

Ensure that your curtains are the right size for your windows so that you will not encounter a problem.

It is okay for it to be long but not so short because it would look like a crop top.

 

Step #2. Grab your rod

This one is indeed essential for you, so make sure that your curtain has something to hold on to when hanged.

Make sure that the holes of your curtains are bigger than the size of your curtain rod.

 

Step #3. Slide in the curtains

Insert one curtain from one side of your rod, but before that, make sure to get the lock or stopper first.

Some curtain rods have these stoppers you can unscrew when you are putting up your curtain, do that one.

And then, as you insert it, slide it until the middle of the rod.

Close the side you unscrewed right after that one.

The next thing you have to do is apply the same steps and process to the other side of the rod and the other curtain.

You have to make sure they have equal areas among the rod to make it even and proportional.

The curtain might crumple above because it might be too wide, so it is compressed, but you can arrange it properly.

Make the folds even and good-looking even though it does not do not sit properly on the rod.

Those two curtains will have a division in between, which allows you to view and adjust how you open them.

Right after that that you can now set it aside, considering both ends are screwed properly.

 

Step #4. Put the rod on the hook

This step is quite common.

You will just put up the rods on the hook you drilled or pinned earlier.

Be careful when putting it up so that it won’t get damaged or it won’t fall on the floor, or else it might get disassembled.

Also, upon setting it up, make sure to double-check it before you leave it like that.

It might be a bit twisted or so.

 

Step #5. Add curtain ties and other decorations

This one is not necessary, but it will add to your enjoyment of enjoyment when you are looking at your window.

You can have the option to tie your curtains during the daytime for the sunlight to come in.

Have curtain ties on the sides that complement the color of your wall and curtain.

It can highlight the whole thing to make it stand out even more.

You can also add curtain drapes if you wish.

Make sure that you know how to measure your windows for curtains to avoid sudden problems.

When you are having the idea of buying a curtain, you have to know your window’s area and dimensions.

 

Conclusion

That’s it for our article today.

I hope you all learned something today that concerns your curtains and windows.

House beautification is a must! It’s a good thing we have answered, “How to put two curtains on one rod?”

At least now you have ideas on how to properly do it which you can share with your family and friends.

how to hang pinch pleat curtains

How To Hang Pinch Pleat Curtains? 11 Easy Steps! 

How to hang pinch pleat curtains? In 11 easy steps, you can! All of the steps can be executed with ease, just believe me!

Hanging pinch pleat curtains can offer next-level elegance in your room.

However, this type of curtain requires a specific hook.

The hooks used for this are different from those hooks you use for other curtain types like pencil pleat curtain, for example.

This task may look very intimidating at first, but all the remaining steps will be easy for you after your first stab.

 

Steps To Hang Pinch Pleat Curtains

Let us divide the process into two.

  • Attaching the hook
  • Hanging the pinch pleat curtains

Before you can hang your curtains, you will have to mount the hooks first.

So, how to hang pinch pleat curtains?

Here’s how you do it:

 

Step #1. Laying out the fabric

Lay your fabric on a table with its top back facing you. Make sure to stretch it out flatly so that it won’t be wrinkled.

 

Step #2. Counting the hooks

Count the hooks to ensure that they have the same number as the rings.

Each pleat requires one hook. Also, one hook is needed for each end.

Pinch pleat curtains can be hanged on a track using a glider or on a pole using rings.

Also, remember to ensure that all the hooks have a similar size.

 

Step #3. Measuring the space

Measure the space between the hook and the curtain hardware’s top. Start putting the hooks in place.

 

Step #4. Aligning the hooks and marking the fabric

Align each hook next to the wrinkles following the measurement you used.

You can lay the hooks on the material first to know where to position them.

Using a pencil, mark the bottom of each hook. But you might as well use a sewing pin to mark the spot.

 

Step #5. Piercing the fabric

Stab the marked area of the fabric using the hook’s sharp point.

Make sure to go all through the inner stuffing of the material from its outer layer.

Continue pushing the hook but ensure that it will not come through the front of the wrinkles.

As you are doing it, you must always lift each pleat and look at its front side.

 

Step #6. Adjusting the height

Before you check the length, insert some more hooks on each pleat.

It would help if you looped each hook into the curtain rod’s gliders or rings as you support the rest of your pinch pleat curtain.

Ensure that their heights are aligned. If not, you need to adjust them accordingly by repositioning the hooks.

In case you want to take out a hook, pull it out straight until its sharp point will come out.

Re-insert it in its new position just like how you do it earlier.

 

Step #7. Continue with the rest of the hooks

After ensuring that the height looks fine, you can now insert the remaining hooks.

Make sure that there is a similar distance in between each pleat.

You can measure the pleats to be sure that they are evenly spaced.

After you have mounted all the hooks, it is now time to hang your pinch pleat curtains.

Follow the steps below:

 

Step #8. Folding the space between pleats

The first thing you need to do is fold each space between two pleats – either inward or outward.

This step is important because when you hang your curtains later, that space can bunch as you push the curtain top together.

So you need to look for the spaces between the pleats and fold them to achieve a more polished look.

 

Step #9. Folding the remaining space between pleats

Continue folding the areas in between pleats throughout the entire curtain.

Again, you can do this inward or outward, depending on the hardware that you are using.

On each end, fold in half the hem allowance. Make sure that the hooks are positioned at the center.

Doing this will slightly push the end of the fabric outward.

 

Step #10. Inserting the end hooks into the ring or glider

Slide one hook loop over the ring or glider and allow it to fall into place.

It would be best if you started working from the center to add more rings and gliders when needed.

As you are doing this, make sure to support your curtain weight because if not, it might fall towards the hook’s end.

When you are using a glider, you will see that there is already a tiny eyeless per glider.

On the other hand, if you are using a ring, you should also push through the hook on each curtain ring’s eyelet.

You will see this on the bottom part.

Repeat the process until you successfully inserted all hooks on each ring or glider. But ensure to perform this one at a time.

Also, remember to keep on supporting the curtain weight. It would help if you did not skip any glider or ring.

Otherwise, you will have to repeat by unhooking each hook and put them back in their proper places.

 

Step #11. Adjusting the curtains to fill any space

Finally, adjust the curtain panels, and you are done.

 

It’s A Wrap!

After following all the steps above, you can now admire your newly hanged pinch pleat curtains.

That is how to hang pinch pleat curtains.

Job well done!

Sign up to our newsletter!