Want to Put a Swivel Base on a Lazyboy Recliner? 3 Easy Steps!

This article will show you how to put a swivel base on a lazyboy recliner. The process is not difficult and it should take less than an hour, so grab your screwdriver and let’s get started!

There are many reasons people want to know how to put a swivel base on a lazyboy recliner. Perhaps the person has just bought one of these chairs but they don’t have access to tools or perhaps they like being able to rotate their chair while sitting in it. Whatever the reason may be, this article will teach you how it is done!

 

Put a Swivel Base on a Lazyboy Recliner

Steps on Putting a Swivel base on a Lazyboy Recliner

Step One: Take the old swivel base off of your lazyboy recliner. This is done by loosening and removing all of the screws on the bottom side of your chair, starting with those closest to you and working towards those that are farther away. You should be able to take this piece right off!

Step Two: Put a new swivel head cap onto your Roomba headboard using two bolts or wood screws (depending on how many holes there were in it) per hole for extra stability. When installing these pieces, make sure they are pointing at something sturdy like another beam in the house where nails will not pull out easily – we don’t want any accidents here!

Make sure to measure the height from the floor to where you want your swivel base so that it is even.

If there are no holes in your Roomba headboard, don’t worry – just drill some in!

Step Three: Put a new swivel bottom on your lazyboy recliner. This will be done by screwing two bolts into each of the four points on the chair’s wheelbase and bolting them together tightly with washers all around for extra stability.

Make sure they’re tight enough not to come off or wobble after installation! Now put this piece back onto the top side of the chair where we removed it earlier and tighten all screws down securely for good measure.

 

Benefits of putting a swivel base on a Lazy Boy Recliner

You can swivel around in your chair and still reach the handles for reclining back or sitting upright

it’s easier to get out of/in a lazyboy with this modification because you don’t have to push yourself up before getting down on the floor. You’ll be able to just lean over and use your arm for balance

it’s easier to get into or out of the chair because you can just lean over and use your arm for balance. You don’t have to push yourself up before getting down on the floor.

 

What is a Swivel base on a Recliner?

A Swivel base on a recliner is the part of your chair that moves left and right. This can be turned to either side so you don’t have to constantly turn around for people on both sides of you.

 

How Much Does a Swivel Base Cost for a Recliner?

A Swivel base for a recliner will cost around $250 to install. This is more expensive than purchasing it, but the installation fee includes labor costs and all materials that are needed to complete the job.

The average price of installing one swivel seat on your lazyboy chair is between  $250 and $400. The installation fee includes the labor costs as well as all materials necessary to complete the job.

This is more expensive than purchasing it, but the installation fee includes labor costs and all of the supplies needed for a successful install.

 

How to Care for Recliner Swivel Bases?

Swivel bases for recliners are made of metal, plastic, and leather. They all need to be cared for in a different way, so it’s important to know what type of your swivel base is before cleaning or scrubbing too hard on the surface.

If you have a metal swivel base for your recliner, all you need to do is wipe it down with a dry cloth.

Plastic swivel bases should be cleaned using a vacuum cleaner attachment and then wiped clean with a damp towel or soft brush.

Leather swivel bases can only be cleaned using the services of leather professionals because they cannot be  soaked in water.

Avoid placing anything under the swivel base of your recliner because this can lead to permanent damage caused by scratching and scuffing.

 

How to Prevent Wear and Tear on Recliners

A lot of wear and tear can be caused by constantly moving in a recliner. It’s important to know what type your swivel base is before cleaning or scrubbing too hard on the surface. If you have a metal swivel base for your recliner, all you need to do is wipe it down with a dry cloth  to remove any dust or dirt.

Make sure to use a vacuum cleaner attachment and then wipe clean with a damp towel or soft brush if your recliner has leather swivel base because it cannot be soaked in water.

Avoid placing anything under the swivel base of your recliner because this can lead to permanent damage caused by scratching and scuffing.

To clean the seat cushion, use a mild detergent (such as Woolite) to make it soft and supple again.  Use only lukewarm water because cold or hot water can cause shrinkage of fabric over time.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

No more posts found in this category.

[mailpoet_form id=”2″]