Step by Step Guide on How to Open Peg Perego Stroller

The Peg Perego stroller is the newest and most innovative car seat available in the market. It comes with a lot of features that make it one of the best options to consider when buying a new car seat for your child. The Peg Perego is designed to open from either side, making it easier for both parents and caregivers to use. How to Open Peg Perego Stroller? Read on below!

 

Steps on How to Open the Peg Perego Stroller

Step 1. Approaching the site where you want to open it, use your thumb and index finger on one hand each. Grasp either side of the handlebar with these two fingers while supporting the weight of the stroller. With both hands pull them outwards to release from their locks

Peg Perego Stroller

The Peg Perego is designed so that it can be opened from either left or right sides; whichever is comfortable for you.

Note:

If this does not work, try using a shoehorn (instead of pulling) to push down on the lever found at the hinge end and then lifting on those handles until they come loose

Step 2. Grasping onto one set of handles, lift upwards – maintaining a firm grip as you do this. With a slight push, one side of the handlebar will come loose and now you can grasp it with both hands

Step 3. Continue to pull on that set of handles until the stroller opens up fully The peg Perego is designed so that it can be opened from either left or right sides; whichever is comfortable for you.

If this does not work, try using a shoehorn (instead of pulling) to push down on the lever found at the hinge end and then lifting on those handles until they come loose. -Grasping onto one set of handles, lift upwards – maintaining firm grip as you do this.

 

How do you put together a YPSI bassinet?

You need to assemble the bassinet by attaching each of the four legs. The Peg Perego is designed so that it can be opened from either left or right sides; whichever is comfortable for you. If this does not work, try using a shoehorn (instead of pulling) to push down on the lever found at the hinge end and then lifting on those handles until they come loose. Grasping onto one set of handles.

 

What should I avoid when assembling my Peg Perego stroller?

When assembling your Peg Perego stroller, avoid using tools as they may damage the material. Ensure that you have a firm grip when pulling on handles and if the assembly is too difficult to manage, do not force it – instead contact customer service for assistance.

The straps are located at both sides of the bassinet; adjust them so that their length reaches around 80 cm to be secured for an infant weighing up to 13kg (28 pounds).

Once adjusted, pull firmly until comfortably snug without cutting off circulation or causing any discomfort. This will prevent slippage during use and allow the baby’s movements while asleep to be detected by parents more easily. Avoid loosening these once again after securing them because this can lead to the straps becoming tangled.

 

How to break down a Peg Perego stroller

Step 1. Open the stroller by pulling up on the handles

Step 2. Unclip or unthread any straps that are holding it together. This may require some strength, so don’t worry if you’re not able to do this with simply your hands

Step 3. Look for a peg at one end of the hinge bar – this is what connects all four wheels and when removed will allow you to separate them from each other. You can also find another peg about three feet away from that first peg and use either method to break apart the four sections.

 

How do you fold a Peg Perego YPSI stroller?

Step 1. Fold the seatback so it’s perpendicular to the ground and use one hand on each side of the stroller

Step 2. Bend your knees slightly, then lift with both hands while bending your elbows. The front-wheel should be off the ground now as you are lifting with that upward motion from underneath

Step 3. As soon as you reach a comfortable height, bring in one arm first followed by another until they touch together at about chest level. Use this movement to gently pull upwards and backwards like opening a door which will close other doors behind it – in this case, bringing all four wheels inward toward the centre of the fold.

 

How to remove Peg Perego canopy

Step 1. Using both hands, grasp the fabric at each end of the canopy and pull it down firmly

Step 2. You should now be able to see a metal bar with clips on either side. Carefully remove the four (four) screws that are holding it in place by using an Allen key or screwdriver.

 

How to fold Peg Perego stroller

Step 1. Twist one half of the frame around so they become parallel with each other

Step 2. Thread straps through loops where indicated and tighten them up as much as possible. These will need some strength again but can usually be tightened sufficiently just by pulling on them from your top position – if not, then use a tool such as pliers or vice grips to do this for you.

Remember, the tighter these are, the more secure your stroller will be when folded and placed in a car boot.

1 thought on “Step by Step Guide on How to Open Peg Perego Stroller”

Leave a Comment