Are you curious about how to make curtains with tabs?
Worry less. We will give you enough information later on. Making one involves seven easy ways. You can execute each way with ease, I’m sure!
But then a tabbed curtain looks better than the usual.
It gives off a unique and aesthetic look into your curtains, but then you can make it on your own.
If you want to save money, you can always explore things and make sure you can do it rightly.
This article will be your guide throughout the process. So, read on.
Making tabbed curtains are one of those fantastic techniques in making your curtains look extra fabulous.
In that way, it gives an intense look, even if it just holes above the curtain where you insert your rods.
Art is always around the corner. You have to identify which way you need to apply it.
Steps To Make Curtains With Tabs
Tabbed curtains are something that you should do with a lot of patience and passion for accomplishing it properly.
And then you need a good guide in the making such, so you won’t get lost and perform well while doing it.
These steps are your key, be sure to execute well.
So, how to make curtains with tabs?
Step #1. Gather your materials
In making a tabbed curtain, you will need fabric for curtains or drapes also a thread and needles, including pins.
You will also need fabric scissors, a tailor’s chalk, or any marker for fabrics.
As for the measurement, you will need a measuring tape, ruler, or any other things you might use for measurements.
One last thing is iron with an ironing board.
Step #2. Cut out the fabric
You can make the cuts after you have measured the window size. Just follow the basic steps in making curtains.
Stitch the hems in all sides of the curtain make sure it is about half on one inch wide per side.
As for the bottom hem, make sure it has at least 6 inches extensions and 3 inches extensions for the width.
You can sew them, make sure the fold is equal, iron the sides to make sure it is flat and even.
Step #3. The curtain tabs
The next thing you will do is to focus on the curtain tabs. This article is all about it, so make sure you pay attention.
Cut out fabrics the same color, designs as to what you have in your curtain, or else it will look odd.
So, upon buying the fabric, you have to consider the tabs.
You need to cut a rectangle with a measurement of 5 by 9 inches per tabs for one tab.
It is up to you to choose how close you would want it to be alternated on your curtains.
But one every 2 – 3 inches gap is good enough.
Step #4. Stitching the panel
This one is where it will all look good. Upon the tab panels you made. You fold the length 1 inch on one side.
After that lay, it plats and irons it so that you will have good and even fabric. Then insert it into the machine.
Or if you will hand sew it, you may. Stitch it to the back right from the front of the panels.
Then flip it upside down. You will fold it overlapping where you stitched earlier.
Right after you will stitch it again, be careful not to sew it until the other side, or you will not be able to flip it again.
Step #5. Flip it out
The next thing you will do is flip it over, showing the side that has designs and is already stitched.
And then fold it in the middle creating the tab like a pocket, and then it is time to iron it again.
Make sure that it will not open back when you are stitching.
Step #6. The back layer
Place the tabs on the curtain with 2 – 3 inches of space in between. Cut a fabric that will match the width of your curtain.
Three inches in length would be suitable for it. And then sew the bottom part so that you’ll have lesser things to do when you apply it on.
Pin the layer with the tabs on it, and make sure that you iron it again to make sure it sits right before you sew it.
Step #7. Stitch it
You can now start by running the sides on the machine or by stitching it manually with your hands.
Do not get off the pins. It will hold the fabric in place while you are stitching it.
You will need to stitch the top layer but be careful not to move the tabs, or else it will change the position.
With that, you iron it again, making you stitched sure all sides and no excess fabrics are found.
Conclusion
It is good to know this type of thing when you have a home that you own.
When you cannot afford to buy these kinds of curtains, you can make them on your own, and your house will be prettier.
Good thing we answered, “How to make curtains with tabs?” now you have an idea about it.