Learning how to make a slipcover for a loveseat is one of the easiest ways to give it a new look. Or if you happen to come across a shape that you really like but comes with an unpleasant pattern, you can always give it a personal touch.
Of course, you’re going to need some basic sewing skills and enough determination to get through the project. You may experience difficulties when it comes to irregular shaping, but if you know the basics, you will probably get the look you are aiming for.
After all, you simply need to get together a fabric of your choice, measure the dimensions of the loveseat, stitch the cover together, and piece it together with cotton cords. You can choose from a variety of fabric colors.
Step 1: Measuring
When it comes to sewing, taking the appropriate measurements is the most important part of the job. Make sure to measure your piece properly so that you don’t end up with a cover that is a size too small or too large. It will also save you a lot of time, effort, and money.
Start by measuring the widest point from the back of the chair. Let the backside of the loveseat face you, and measure the widest point from arm to arm. Afterward, take note of the depth of the seat or how low it falls from the top.
Measure the height of the arms from the top all the way to the bottom part. Don’t forget to pay close attention to these details to make sure that you are getting the number right. Take your time and try to measure twice if you are not confident with the first one.
Step 2: Choose a fabric
Since we are giving those pretty little loveseats a new look, why not take the time to select a nice piece of fabric. You can opt for solid colors or patterned ones, even experiment with ombre types of designs. It is all up to you.
Make sure to buy a sufficient amount of fabric before you start pinning, cutting, and putting your piece together. You should also buy one that is a few yards more than the exact amount since washing the material might cause it to shrink a few inches.
Step 3: Cut the panels
Remember those measurements we took earlier? Take them out, and we’ll start with cutting the panels. If you are working with those types of fabric that have a right and wrong side, you may want to cut them folded with like sides facing.
Cut all the panels that you might need, including the armrest, backrest, seat, and do not forget the skirt. Leave some seam allowances at around 3/4 inches or more. If you feel the need to re-measure your sofa before the pieces, go ahead and do so. It is better to be safe than sorry.
Step 4: Make the piping
The piping is crucial because it gives your sofas and loveseat a professional clean, and neat look. Luckily, it won’t be too much of a challenge if you have a zipper foot. These are some things you really have to do when learning how to make a slipcover for a loveseat.
To make the piping, cut all the fabric depending on your sofa’s measurements. Try to use the balanced fabric for the piping and cut it into 2 inches before joining them together. Form a long strip using the material.
Step 5: Sew them together
Take the panel, which we will use as the seat cover. Drape it on the cushion and tick in the sides so that it fits the seat nicely. Make sure that the wrong side of the fabric is facing upwards before we do the hemming.
Pin the corners or draw a line if it makes the process easier for you. Sew all the four corners and make sure to fit them nice and tight. You can do the overlock again by cutting off the excess fabric and cording it once more.
Next, do the back seat. Pin the sides to the edges of the backrest and make sure that it fits nice and tight. Sew the side panels with the wrong side of the fabric facing out. Turn it right side in, and you should have a perfect fit.
Do the same on the loveseat’s armrests. Don’t forget to sew the pieces together once you have sewn them one by one. Pin the excess fabric remaining on the panels and sew them together. Add the skirt and piping for a finishing touch.
You can add some eyelets and attach them to the inner corner of your sofa so that it tucks the fabric in place. There are tons of ways to maintain a cozy and warm slipcover that will definitely change how your loveseats look.
Don’t worry too much if you are dealing with a sofa that is shaped irregularly. In that case, you can try to get rough measurements before buying the fabric. Get a larger size and drape it over the loveseat. Tuck the sides and sew the panels.
Overall, learning how to make a slipcover for a loveseat can be quite intimidating. However, its small size makes it an easier project compared to other furniture covers. Just be patient and get the measurements right.