Do you want to know how to make a baby doll bed? Please don’t fret, my friends, you’ve reached the ideal place!
Well, it’s a simple procedure.
You’ll finish this quickly and still have time to make cushions for the dolls’ benches and chairs, for sure.
I guess you don’t know where to begin, so, without further ado, let’s start!
I’ll show you step-by-step instructions on making a baby doll bed.
Take a peek throughout the article, and have fun!
Things Needed To Make A Baby Doll Bed
To complete this activity, you will only need a few objects.
Here are the things you will be needing:
#1. Materials
Just imagine you’re going to create a baby doll bed that’s 18 inches tall.
For this, you’ll need a fabric that is about 0.90 meters.
It’s not an issue if you’re not a pro in sewing.
Here’s my advice, though:
Choose cotton fabric because it’s the easiest to deal with.
In my situation, I used a quilting cotton cloth.
You may ask why. Well, its weight is tolerable, usually light to medium.
The best part about this type of fabric is that it can be woven quite tightly.
Plus, you can opt for different color schemes and designs that you like!
It is also readily available at any nearby store.
So, there’s no way you will find it hard to get one for yourself.
#2. Stuffing
For stuffing, you can use either polyester or foam.
If you don’t have any stuffing on hand, don’t worry.
As an alternative, fabric scraps can be employed.
Although this option will make your baby doll bed heavier, it will not cost you anything.
This is for those who are looking for a low-cost option.
All you need to do is cut some fabric scraps into small pieces.
Steps To Make A Baby Doll Bed
After you have prepared the materials, you can now proceed to construct your baby doll bed.
What is the most effective method for making a doll bed mattress?
My friends, follow these steps on how to make a baby doll bed get started:
Step #1. Deciding the size of the bed
The first step is to take the dimensions of the bed.
The hardwood base for baby doll beds is usually 12 x 19 inches.
It’s critical to remember that only the base measurements, not the sides, are required.
This ensures that the bed is securely fastened to the bed frame.
Step #2. Cutting the baby doll bed
Following the measurements, cut two pieces of fabric.
It should be the same size as the base of the bed.
Remember to leave an inch of seam allowance all the way around.
You’ll need to cut the cloth to 14 x 21 inches if the base is 12 x 19 inches.
Step #3. Stitching the sides of the bed
Make sure the two fabric pieces are in the same place.
Then, ensure that the right sides of the board are facing each other.
Begin stitching around the components of the baby doll bed.
One end should have a 14-inch seam allowance, and another end with a 3-inch gap.
Do you want to have a clean finish?
Leave the space at the end of the bed.
Step #4. Rounding the bed corners
It would help if you used your finger to force open the seams in the corners of the bed when boxing it.
Then, line the top and bottom seam.
Make a half-inch-long diagonal mark on the spot.
The main purpose of boxing the mattress corners is to provide height to it.
Stitch across the boxed corners and then trim them straight through.
Step #5. Putting together the mattress
Once you’ve completed sewing, turn it the way out.
Now is the time to start filling it, depending upon your preference.
You can use polyester, foam, or fabric remains.
If you’re using polyester to fill the bed, you can always break it down into smaller tufts.
Keep a smooth and slow pace while doing so; this will prevent your bed from being overly stuffed.
Also, make sure there are adequate resources in each corner.
In this way, you’re sure the bed will be contoured well.
Before closing the gap, you should try it on the bed.
This procedure ensures that your newly made bed sits flat on the surface.
It might also help if you slowly and carefully packed the mattress.
Even if it takes some time, you don’t want to make a bumpy bed for your daughter’s doll.
Step #6. Stitching the gap
To finish the process, you can stitch the gap.
And yes, it’s all finished!
You now have that wonderfully made baby doll bed.
It’s amazing, right?
It’s A Wrap!
Isn’t that ideal for a baby doll bed?
I told you! You don’t need a pro sewing experience.
Through these simple steps, you already have a doll bed for your daughter.
I’m sure it’s an amazing gift for your child to enjoy.
That’s how to make a baby doll bed.
Until then, my friends.
Enjoy!