4 Easy Steps You Can Learn On How To Macrame A Chair

Are you interested in getting that picture-perfect chair and wondering how to macrame a chair in less than five steps? In an era where home improvement is at its peak, everyone wants items that will fit multiple themes they decide for their home. You must look into those intricately woven chairs that are not only beautiful in themselves, but a piece that can fit and enhance any setting.

Macrame is a crafted item made using a variety of knotting and cords to assemble a new textile. The patterns made using these knots and combinations of ranges of cord size form a very unique weave that can be used as fabric for cloth or cover and parts of furniture. The course and geometric surfaces formed make macrame a favorite in accentuating dull and plain views.

how to macrame a chair

Macrame almost did slip into the depths being forgotten for some time when it was reserved only to the beach and bohemian settings. Luckily, fashion trends like to move in cycles and macrame was able to come back and even create better and bolder sets in the modern age. It’s able to enter almost every platform, so long as the textile is involved.

 

Easy Steps In Making Macrame Chair

Though macrame history suggests that it started to become prominent as wall hangings, you may be picturing it more in hammocks and hats. Even seafarers made these crafts while they were in the sea, so macrame items in items like chairs and cots are highly common even to this day.

You are probably looking into creating a macrame chair for yourself, so here are a few steps you can rely on making one:

 

Step #1. Pick out some weaving materials

The quality of your macrame chair will depend on the materials you use. While it seems like an excellent idea to use high-end cords for your chair, we suggest you think about it. High-end materials produce high-quality products, so why not?

If this is your first project, what you need to focus on is learning and perfecting the art of weaving. In projects like this, expensive materials will end up getting ruined and wasted if you don’t focus on getting the knots right.

Of course, it doesn’t mean that you should use run-down items. Instead, pick out some average or just a bit higher quality products that are worth practicing on.

The things you need to prepare are:

  • Chair
  • Macrame cord
  • Large crochet hook
  • Scissors, and
  • Lighter

In this article, we’re going to focus on doing macrame on a foldable steel or aluminum chair. Once you’ve mastered how to do it on a simple chair, the next ones will surely go smoothly, whether you’re using a different frame or complex patterns.

 

Step #2. Remove all the fabrics from your chair

Steel and aluminum chairs usually use thick fabrics as a seat and back support surfaces. These fabrics are sewn on the edges of the frame. You can easily remove these with a scissor.

Clean the chair until only the frame is left before you start weaving. If the previous fabric used glue or other types of adhesives, make sure you remove this from the chair either by scraping or using a solvent.

 

Step #3. Start weaving vertically

To start, tie a square knot on the edge of the seat of the chair closest to you, leaving about 3-4 inches of the thread towards the end of the cord. Hold this end inside the chair, then gently pull the longer end over the edge closest to you.

Move the cord towards the back of the chair, under the edge that is shared by the seat and the back, then around the top of the edge of the back support.

Make a loop around your finger with the moving end and place it on the outer side of the vertical weave. Insert one of your crochet hooks inside that loop and tighten it in place. Carry the moving end underneath the bottom edge, then around the seat edge from the top.

Again, create a loop with the moving end and hold it in place with another crochet hook. Pull the moving end back to the top edge in the same manner and use the crochet hook to create a chain loop by inserting the new loop inside the previously held loop.

Keep going back and forth with this procedure until you reach the part of the edges where the frame starts to curve. To finish your vertical weave, lock your moving end with a square knot towards the inner edge. Slightly burn the edge of the cord with a lighter to the cord whole.

 

Step #4. Add a horizontal weave

Start the horizontal weave at the same corner as the vertical with the same square knot. Your horizontal weave will be the one to create patterns on your chair by going up and down the vertical weave.

Pass the moving end on top of two or three vertical cords then below two or three vertical cords. Do this alternately to make a checkered pattern.

You can then wrap the moving into the edges the same way that you did on the vertical weave. However, your horizontal weave goes from left to right or vice versa, with one part on the seat which ends at the edge of the back.

Start the horizontal weave of the back from a corner near the seat edge, going left to right, towards the top. Start and move through the same steps as the seat weave following your pattern and locking with a square knot.

 

Conclusion

You can learn other weaving techniques that tackle your concern on how to macrame a chair featuring more advanced and intricate knots. Macrame is after all all about knots and weaving skills, so the harder your knots the better are your products.

Leave a Comment