How To Light A Gas Dryer? 3 Steps To Locating And Turning It Manually!

How to light a gas dryer? Gas dryers are one of the rarest types of dryers to be seen even if they have been around for a long time already; they have to be lit manually, and sometimes people find it as the downside for this type of dryer. Today, you can choose from many dryers, though this is unique from the others, so let us continue.

Regarding that problem where they have to be lit manually, it takes some time to get used to it.

how to light a gas dryer

Nowadays, your regular dryers turn on by pressing the buttons and adjusting the timer, settings, and everything necessary for your garments to be dried up. If it isn’t burning, it will not warm up, so let us know.

To light up a gas dryer, if yours goes off out of nowhere, you must know how to light a gas dryer. Today, we will be tackling that since some people are still not familiar with how this works. Once we are done discussing this topic in the article, you will know many things that are necessary to understand for this, we assure you.

 

Lighting A Gas Dryer

How to light a gas dryer? We know you are not familiar with this type of dryer, so today, we will be learning how to light it up if you have one at home. To do that, you must know all the necessary steps and do it as soon as possible to test if the process works for you:

 

Step #1. Locating where the pilot and the gas valve are both placed

It is not that hard if you want to know where they are located. The only thing that makes it hard for them to be seen is that they are placed in different positions on other models and which is why sometimes it is unpredictable whether you can find the thing that you are locating for.

With that, we will help you locate both the pilot and the gas valve today so that you will have an easier time dealing with things to accomplish the task easier. Once the process is done, you can then turn and try using your gas dryer and see for yourself what outcome it can give you. Without further ado, let’s go.

Now, let us start with the gas valve. To start doing the process of locating that specific area, you must follow the gas line that can be seen from the main shut-off down to the base of the dryer.

Please take note that it isn’t assured that you will always locate the gas valve in the exact location. If you cannot see yours, use the manual.

Then to remove the covers, you may do it from the front side of your gas dryer. It may have screws that hold it, so remove it using a screwdriver if needed; make sure that you put them in a secured place to avoid losing the small but essential materials to hold your gas dryer’s panel cover.

 

Step #2. Locating the gas control

Now that we are down to the second step of this process, it is now time that we move on and locate to check if where we can find the gas control. Well, to know if it is, the gas control usually looks like a giant, red knob near any gas valve. From there, we can now make any adjustments needed later on.

Also, note that you wear a mask within the gas valves since it may be sensitive to you or your skin. So to avoid allergies from happening, we recommend that you do these too for your safety so that you shall do no damage to your health or your machine. On the other hand, you might want to read this article, “Where to buy heating element for dryer?”

 

Step #3. Lighting the “pilot” of the gas dryer  

You will see a marker imprinted on the knob and several positions present on the plate for adjustments from where we have landed. To start the process of lighting it, turn the knob on to off position and wait for at least three to ten minutes before touching it once again. The residues of the gas will eventually clear.

The knob should then be turned on to the pilot position when the timer’s over.

So to light it, all you got to do is hold it while you put a lighted match or any heat source to the orifice. Once it lights up, remove it but keep the knob in its position to give the dryer the time to heat up. Once done, release it and turn it to work. Amd that’s how you light a gas dryer.

 

It’s A Wrap!

How to light a gas dryer? Once everything has been set to place, your gas dryer is ready for usage! Now that we’ve known how to light a gas dryer, it will now be more accessible to ready it every time there is a need for using it. With that, you might also want to learn how to dry blankets in dryer.

Leave a Comment