Are you interested in knowing how to install portable air conditioner in crank window? Well, we have seven simple steps for you to learn. So that when you finish reading this article, you can do it on your own.
Some find it difficult to install their ventilation kit in crank windows because you can’t slide it to close the gap. Or you can’t entirely close the window, which means the outside air will enter your room.
However, it’s possible, and this article will provide you with the steps to do it. Casement windows crank sideward or upward. And they open at an angle. So, if you want to place your window kit on your crank window, you will not be able to close that particular portion.
But how are we going to prevent the air from stopping? Well, we’ve got some solutions for you later. So, let’s get started!
Installing Your Portable AC Unit With Crank Windows
For now, here are the steps we have gathered on how to install portable air conditioner in crank window:
Step #1. Choose your window
So, crank or casement windows often come in a group of 2 or 3. They are then placed together in one frame.
However, in this process, you have to pick one. The window that you like the least or the window that could provide your AC unit better access to this and the outlet at the same time.
It means that there should be an equal distance between your unit and outlet and your unit and window. But if your window has no outlets near, then you can use an extension cord.
Once you’ve chosen your window, open it. The opening should be enough for you to be able to place the window panel.
Step #2. Unbox your window kit
Your kit will include your window panels, exhaust hose, ducts, and possibly some screws.
Prepare your window panels and attempt sliding them into your window frame’s metal aluminum channels. Don’t worry if there are some gaps because we’ll get to that later.
Step #3. Determine the dimensions needed
We’re going to need some materials to fill in the gaps later in the window. But before buying the required materials, we’re going to determine their dimensions.
Your window kit has two or three panels. And one of them has a hole for your hose. You can use just one of them, but that depends on you.
So, we inserted one window panel earlier; now, we will measure the gaps that need to be closed. Then, you can now go to the nearest hardware store.
Step #4. Assemble the ventilation kit
So, slide through your panel/s and screw them tightly to your window frame. If there is a space at the top, don’t worry about it for now. Make sure that the hollow side of the hole in our panel faces the exterior side of your window.
Step #5. Fill in the gaps
You can choose any material to fill in the gaps in your crank windows. Some of the best materials to use are acrylic sheets, foam, or thick cardboard. Or, if you want it to feel like glass, use Plexiglass which looks similar to the acrylic sheets.
For now, we’re going to use Plexiglass for better results and giving your window a more natural look. If you’re going to use foam or cardboard, it will cover the gaps entirely and prevent the air and light from entering your room.
These glass sheets come in various sizes, so choose the one suited for your needed dimensions. You can also slide them through the window and connect them with translucent sealant.
Or you can leave them unconnected so that you can remove them whenever you want. And make sure that there were no gaps left for the air to pass through.
Step #6. Attach your cables and hose
Insert the oval-shaped plug to one end of your hose and secure it tightly. Connect it to the end of your exhaust hose on the interior side of your window panel. And the other end will be attached to the rear side of your unit.
We will append the round duct at the other end of the hose. Rotate it to fasten the hose tightly onto your central unit. Extend your hose, and don’t let it bend because it might tear. And don’t forget to attach other cables and wires.
Step #7. Check if the unit is working
This step is for finalization to make sure that there will be no ventilation problems or leaks. And to check if it’s working. But before that, check if your panel is secured correctly to the window. Then, plug your unit into the main outlet. Note that some portable ACs have power switches on their adaptors.
Now, you can turn on the power button in your unit or remote. While it’s pre-cooling, observe if there are some weird sounds or any leaks in our hose. Also, check if no warm air is coming out from the unit or duct plugs.
The air should only travel in the hose towards the outside world. If there are no problems, then you’re now free to enjoy your new portable air conditioner.
It’s A Wrap
And that wraps up the steps on how to install portable air conditioner in crank window. Ventilation for your portable AC is essential to avoid overheating and other problems.
So, don’t ignore any suspected problems. Avoid any severe damage by double-checking. Keep safe!