This guide helps you understand how to install electric tankless water heater. Well, there are some steps involved in installing a water heater; you’ll learn them as you delve further into this article!
You can fix specific problems with water heaters quickly; however, if your water heater is obsolete or old, it may be better to upgrade it. Although a water heater lasts approximately 20 years, they only survive ten years.
Before installing a tankless electric water heater, understand what you’re going into. It will help if you use extreme caution. Installing your own electric tankless water heater should always be avoided if you aren’t already informed. It’s not a task for the inexperienced. Hire someone to do it for you instead of doing it yourself. Anyway, if you’re interested and want to learn step-by-step details, keep in touch with us at the end. So let’s have fun!
Steps To Install Electric Tankless Water heater.
Installing a tankless water heater is not a very simple task, but if you understand how to do it, you can easily install your heater without hiring a professional. Below we’ve discussed in detail how to install electric tankless water heater:
Step #1. Turn off the water and the circuit breaker
It’s necessary to turn off the circuit breaker before beginning the process so that the electric wires aren’t switched on while you work. Also, if you don’t want your house flooded when replacing your old water heater with a modern one, switch off the water supply. Please remember that flooding may cost thousands of dollars; turning off all water sources is essential.
Step #2. Detached is the front cover
With a screwdriver, gently remove the front cover of the new tankless unit before installing it. After you’ve removed all of the screws, store them somewhere safe. All of these screws must be present if your water heater performs correctly. Please remember you may connect that specific cable between the heater and cover. Before removing the lid, unplug these safely.
Step #3. Water heater installation
After that, the device must be wall-mounted. Keep in mind your tankless water heater is never in a congested or dirty part of the house. However, in the case of an emergency, you must have quick access to the device. The hot water tank is easy to install, requiring only a few screws and the provided mount. Follow the directions included with your device.
Step #4. Connect all the pipes with a water heater
After you’ve completed the device installation, you’ll have to attach the pipes that carry hot water over your home. Your water heater will be connected to these connectors. They must be at the unit’s bottom. If your equipment came with an installation schematic, use it to determine where the wiring has to go. For a tankless water heater, stainless steel is the finest pipe material.
It can endure extreme temperatures while maintaining system flexibility and adaptability. Copper and PVC piping are suitable alternatives to stainless steel piping if you do not have any availability for them. If you choose a stainless steel flexible pipe, you can be assured that the connections will be easy to remove and clean. Cleanings should be performed regularly, according to several instruction manuals.
Step #5. You should install flow and pressure valves
you should install the flow and pressure valves after the connections have been completed. Installing flow valves is a breeze. These enable you to turn off the supply of water to the heater rather than turning off the water to the rest of the house when fixes are required. If the local plumbing authority demands it, you must fit pressure valves. The pressure release valve should be placed on the “hot water” side of the electric heater. For an added precaution, you may put one on the opposite side of the heater.
Step #6. Bleed the heating system
The water heater should be connected and installed entirely in the installation procedure. Before turning on the hot water system, you should still execute the bleeding procedure. Next, you must open all hot water outlets on your property to remove any trapped air. After some minutes, close these outlets and finish the bleeding process.
Step #7. Inspect the electrical connections
It would help if you examined the connections to your hot water system for your protection and the safety of everyone else in your family. First, check that these connections are correctly wired and connected to the correct terminals. The lid should then be reassembled using all of the original screws. The installation is almost complete after the cover has been appropriately fitted to the device.
Step #8. Turn on the breaker
It’s safe to turn on the circuit breaker now that you don’t have to operate on the heater anymore. Check all the connections; if the links are secFirst, check you start your new electric tankless water heater. You may also be interested to know why does your water heater keep tripping the breaker.
It’s A Wrap!
We are happy to know that you will better understand how to install electric tankless water heater after reading this article. The steps involved in installing a heater are discussed above; read them carefully to comprehend them completely. Thank you, friends, for being with us at the end! You may also want to read about how to flush electric water heater and how to clean sentiment from an electric water heater.