How To Install A Pool Heater? 4 Easy Steps!

Do you have a pool and want to learn how to install a pool heater? Well, installing it isn’t as hard and long as you think it is, but you need to be extra careful and knowledgeable on this to install and prevent damages to your heater and prolong its life. 

Pool heaters can help you control the water in the pool, especially in cold weather. You can enjoy the warm water in the pool with kids without worrying about the temperature. Sad to say, some brands cannot help you in heavy weather conditions. That is why you must choose a convenient pool heater that suits your family’s needs and can go through weather conditions in your area. Want to learn how to install your pool heater and other important factors? My friend, read further below.

how to install a pool heater

 

What Is A Pool Heater?

A pool heater is also called a “heat pump.” It is a device that warms the pool water to ease its cold temperature, just like how you enjoy the hot water shower. It heats water by using the outside air and transferring the heat through a refrigeration cycle. It works similar to air conditioning, but not for cooling and instead heats the water temperature. There are pool heaters powered with electricity, gas, and solar. You can choose what power source you must use and match in your area. 

 

Steps To Install Pool Heater

There are tips you should know to help you out in installing your pool heaters, especially if this is new to you. These tips will help you understand the common factors you should always consider with a pool heater, such as weather conditions and your preferred power source. The weather conditions assumably affect the performance of pool heaters. It will be quicker for your pool heater to warm the pool as the air for that day is hotter when it’s sunny.

However, it would be slower during winter or cold days. So, if you live in a country with many hotter days, a solar-powered pool heater or electricity is the best option for you. Meanwhile, choose the gas-powered one if you live in areas with unstable electricity and are colder. Now, here are the steps on how to install a pool heater:

 

Step #1. Distance and secure area 

As pool heaters use outside air, you must put this device in open and well-ventilated areas. The standard distance in all directions is at least 50mm, but this differs in other brands. To ensure, please check your manuals for the proper space. Lack of ventilation will cause the pool heater’s performance and damage or malfunction. In addition, place pool heaters in a secure and stable area for safety purposes and prevent them from falling off the ground or materials that can fall unto it.  

 

Step #2. Bypass Valve and pipes

You must install a bypass valve in between the filter and heater. The bypass valve will allow you to access the filtration system even without the heater. The heater can go off and need time for maintenance or servicing, and this will help you control these areas without worry, primarily if leaking occurs in your pool heater. On the other hand, using soft pipes is not recommendable as they can easily leak after some time. You can use rigid PVC pipes and connect them tightly for safety purposes. You can also add a sacrificial valve to prevent the chlorinated water from entering your heater. You may also want to read about pool heater sizing.

 

Step #3. Ground wire

Never forget to ground wire properly before connecting it to the power supply. The ground attracts the positive charges. It discharges the charges without any harm or risks of electric shocks as it goes through it. Excess electricity caused by damaged circuits or electric overload can pass through the human body, cause electric shock, and, worse, take a life. If a device gets overloaded with electricity, it can cause parts to be fried or start a fire.

 

Step #4. Power supply

If your pool heater is electric, make sure that your supply can carry the needed requirements of your heater. An unstable electric supply can damage its performance and affect its functioning parts. If you have not installed a pool heater in your home, it is best to call a professional to do the wirings for your heater, as they are more experienced and knowledgeable in this field. Meanwhile, gas-powered, you must ensure that the pipes have no leaks towards the heater and install an isolation valve in case of emergencies. 

 

It’s A Wrap!

Even though there are various types and models of pool heaters, they can be installed quickly by yourself, but know that some manufacturers offer a different warranty, so you must consider checking this when deciding who should install the heater. Discovering how to install a pool heater will depend on the model and type of pool heater you purchase are easy. Still, if this is your first time installing a pool heater, you will need a professional to do the wirings and plumbings, but if you are replacing your old pool heater, you need to check the wires and pipes to ensure they can perform well. Click on these links to read related articles; know how does a pool heater works and how long does a pool heater last.

Leave a Comment