How to install a murphy bed? You can install a Murphy bed in various ways, and many don’t require any installation at all.
Murphy beds are great for making the most of the space in a room.
On the other hand, many Murphy bed purchasers have never seen one in reality.
I was in a similar situation once, and it made me think.
“What is a murphy bed, and how do you install a Murphy bed?”
I first heard about it with my friends, and it sounded interesting.
Upon reading some texts about it, it made me want one for myself.
So, I’m sharing the knowledge that I’ve got about murphy beds.
Are you curious too? Then let’s get on with it.
What Are Murphy Beds?
If you heard about a pull-down bed, fold-down bed, or wall bed, then you would know that it’s a Murphy bed.
It comes with a hinged end, so you can store it within a cabinet or closet or upwards against the wall.
As compared to horizontally mounted Murphy beds, vertically installed Murphy beds will entail an additional installation process.
Horizontally installed Murphy beds have such a smaller mass and are less prone to flip over than their vertically installed equivalents.
The installation of a Murphy bed is typically straightforward.
Most of the time, you’ll be able to screw it into place flush with the wall.
In some instances, you’ll need to secure it to a stud for added support.
Steps To Install A Murphy Bed
So, how to install a murphy bed?
Here’s what you need to hear about it.
Step #1. Look for wall studs
The first step in putting up your Murphy bed is to decide where you want it to go and then look for nearby studs.
A wall stud is a smaller cross-section vertical framing member of a building’s wall than a pillar.
They are a necessary component of frame construction.
Normally, studs are spaced every 16 inches, but you can space them every 12 or even 24 inches, depending on the structure.
If you’re excellent at locating holes by tapping on the wall, you can skip using a stud detector.
If you’re not sure if you’ll be able to see and hear a stud, a stud finder is a good investment.
These aren’t pricey and take up little space in a toolkit, so having one of these available is always a good idea.
Stud finders use electromagnets to locate the stud.
And all you have to do is switch them on and move them across the wall till they sound.
It’s important to remember that other huge masses will cause a misleading reading.
Large pipes or electrical boxes can set off your stud finder.
As a result, check for two or three studs that are placed evenly.
This will confirm that you’ve found a stud and keep you from accidentally drilling through the plumbing system.
Step #2. Install angle brackets
You’ll have to boreholes in the wall to secure the angle brackets after you’ve located your studs.
Install the angle brackets on your bed before moving it against the wall and attaching it to the wall.
If you haven’t done so, return to your Murphy bed and finish setting it up once you’ve completed these instructions.
Some models need you first put up the bed, while others demand that you first affix the frame to the wall.
Step #3. Follow bed’s manual
Make sure to follow the directions that came with your bed.
Even though your Murphy bed will not require you to mount it to the wall, you should still take extra care.
Some Murphy beds don’t need to be fixed to a wall.
The majority of Murphy beds would need to be mounted to a wall, but this isn’t something everyone wants to do.
Look for a Murphy bed that isn’t screwed to the wall if you live in a rented flat or plan to transfer your Murphy bed from place to place.
In this scenario, a Murphy bed with a bit of extra weight at the bottom will suffice.
By lowering the center of gravity to the bottom, Weighted Murphy beds help keep the bed from tumbling over.
Another choice is to purchase a horizontally affixed Murphy bed, which has a lower center of gravity by definition.
Since they are not the same as vertically mounted Murphy beds, these beds make excellent low-lying shelves.
This is especially true with twin Murphy beds, which can be as low as 3 ½ feet tall.
Upon knowing how to install a murphy bed, I recommend positioning the Murphy bed in the room’s highest point.
Even though the instruction doesn’t specify it, you might wish to attach the bed to the wall if you’re putting your bed in a slanting area.
You’ll only need to acquire angle brackets and screws for this because your bed will not come with them unless the installation method requires them.
It’s usually a good idea to know what type of installation is required to make a Murphy bed operate before purchasing one.
The simplest to open, but the most complex to install, are Murphy beds installed on the floor.
While Murphy beds that do not require any installation are the most difficult to open and the least stable.