Welcome to the Krostrade Marketplace, please excuse our appearance, we are still under construction.

How To Inflate Air Mattress With Built In Pump Without Electricity

If you’re curious how to inflate air mattress with built in pump without electricity, the answer is obvious. What is the opposite of electric air pumps? Since you can’t depend on electricity, you’ll need manual intervention. 

Air mattresses with built-in pumps are not limited to electric ones. This guide will teach you more about those that use hand-pumps. But nothing to worry about because this alternative is still doable without exerting too much sweat and energy!


How To Inflate Air Mattress With Built In Pump Without Electricity

How Do You Inflate An Air Mattress With A Built-In Pump Without Electricity?

Mattresses with built-in pumps usually require electricity to work. Therefore, the only way to take advantage of a bed with a built-in air pump without electricity is if its pump type is manual. The most apparent type of manual pump that comes built-in is a hand pump. 

A hand pump mechanism pulls air from the outside because the pressure inside decreases as you pull it up. Some air mattresses come with a double-action hand pump, so you can still inflate them without a power source. Of course, you’ll need to exert some effort for it to work, but hand pumps are useful if you’re outdoors and you can’t plug your electric pump.


How Do You Inflate An Air Mattress With A Hand Pump?

Now that you got a mattress with a hand pump, it’s time to familiarize yourself with how to use it properly. However, the emphasis is necessary on checking the manual your mattress has to avoid issues. Then, you can use this easy-to-follow guide as a reference. 

Place your mattress flat on the floor and remove the cap of the valve. Insert the hand pump’s hose inside and begin pumping to reach your air bed’s recommended fill. Some manufacturers recommend inflating up to 90%, so if your mattress is large, take breaks for rest. 

You can also find someone that can take turns with you since a hand pump can be tiresome in extended periods. It’s helpful to pump during cool weather to keep you from getting tired quickly. Finally, place the cap back and secure it in place. 


Can You Use A Bike Pump To Inflate An Air Mattress?

What if your mattress has no built-in pump? An alternative manual pump you can use is a bike pump, so you still don’t need electricity to inflate your mattress. However, make sure that it fits well with your bed’s air intake hole to make the process easier. 

You may need a different nozzle to get a good fit or reinforce their connection with duct tape to keep the air in. Do note that using a bike pump might take you longer to finish inflating, especially if your air bed is large. You can check the options below for other paraphernalia you can use. 


How Do You Pump A Mattress With Air?


If you have no wall outlet


If you have no wall outlet, you can still use several power sources for your air pump. They would be useful for those who don’t have the energy or time to use a hand pump, and some built-in pumps might also work with them. For example, try checking if you can plug your pump in your car’s cigarette lighter. 


Battery pack

You should be able to inflate your mattress as it works with the inverter. If you don’t want to use your car, a battery pack can also replace electricity. But if you don’t have these options, a more comfortable manual pump is a foot pump. 


Foot pump

Instead of using your hands, you’ll just bounce your foot with this pump. Some people find foot pumps easier and less tiresome to use than hand pumps, and you don’t need to bring additional accessories to use them. But if you have no pump, to begin with, what items can you use to inflate your air mattress?


If you have no pump


Air compressor or leaf blower

Did you know an air compressor also works in filling an air bed? In exchange for the noise, some compressors are portable so that you can bring them anywhere. The same goes for a leaf blower because it doesn’t suck the air in. 


Vacuum cleaner

The key in using these items for mattress inflation is ensuring that the valve on your mattress and leaf blower or air compressor is done well. You can also use a handheld vacuum, but only if it has the option of blowing air and not sucking it in. You can reinforce the seal with duct tape to ensure that the air gets into your air bed. 


Hair blower 

For smaller air mattresses, you can either use a hair blower or garbage bag. Of course, these are your last options if you don’t want to blow into your mattress. You can use the hair blower the same way you’ll inflate the bed with a vacuum. 


Garbage bag

The garbage bag, on the other hand, requires a more interesting process. You’ll swing it up and down to collect air, clamp the bug shut, and wrap it around the mattress plag. Push the air you trapped into the mattress, and repeat as necessary. 



Do you have to bring your air bed somewhere without a power source? You can learn how to inflate air mattress with built in pump without electricity if it uses a hand pump. Otherwise, you can connect the pump to alternative power sources like your car or a battery pack. 

how to wrap a mattress for storage

How To Wrap A Mattress For Storage? 7 Easy Steps!

Have you ever wondered how to wrap a mattress for storage? Well, there are six simple steps to do it.

The quality of a mattress is essential, especially if you invested a good amount of money.

A good quality mattress can last 10 to 20 years, depending on how you took care of it.

Maybe you want to upgrade your bed from a bigger one because you just married or the kids want to have a spacious bed.

You don’t want to dispose of the old ones because the mattress condition is still good.

Yes, you can keep it!

With the proper way of storing the mattress, you can still enjoy its usage in the future.

Keep on reading this article, and you will discover the proper way to store the mattress in just a simple way.


Steps To Wrap A Mattress For Storage

These are the steps in wrapping a mattress for storage that will help you save your time, effort, and money you invested in your bed.

So, how to wrap a mattress for storage?


Step #1.  Air out the mattress and clean it thoroughly

The following steps will prepare you to make the mattress ready for storage.

There are so many ways of doing this, but here you will know the easiest way.

You first need to remove all the beddings, then take off the mattress from the bed frame.

Soda is good in removing odor, so dust the exterior side with soda and let it stay longer to absorb some stubborn odor.

Vacuum the soda particles an hour after you sprinkled.

Then air out the mattress for a few more hours before wrapping it out.


Step #2. Wrapping in a mattress bag

Use not-so-thick plastic to avoid moisture to trap from within that may damage the mattress.

Wrap the mattress in plastic and securely sealed it with packing tape.

It prevents moisture from coming in or settling within the fabric that can cause damage to the exterior portion of the mattress.

Suppose you are planning to store it a bit longer.

Secure a quality plastic bag to ensure that the molds will not develop and will be kept dry.

For prolonged storage, check it twice a year or as often as you can to air out the mattress and make sure that it is kept dry.

Reseal it again.


Step #3. Use a covered truck

In moving or storing from a different place, use a covered truck to shield from dust or bad weather during transport.

You may cover it with a cloth to ensure that you will not expose the mattress to dirt.

It is okay to position the mattress on its side.

Instead of laying down and piling up your things on top of the mattress, putting it on its side gives more space for the other stuff.

Never put the mattress on top of your car. It is too risky, and there is a tendency that it will fold.

Once the mattress folds, it damages the entire shape, for it will not return to its original structure.


Step #4. Storing the mattress

It is okay to position the mattress on its side during transportation only but not during a long period where you plan to store it temporarily.

Better lay it flat on the floor to maintain the correct position of coils, inner foam.

Wrong positioning will disfigure the mattress.


Step #5. Keep off

When the mattress lays down flat, never put anything on top of it.

Mainly heavy objects for it could damage the whole of it.

Are you worried about the space?

It is better to put the mattress last, on top of everything where it is flat, like a pallet or rigid cabinet, so that you can arrange the bed on a flat surface.


Step #6. Correct storage place

The basement is the number one place to store everything but be aware that the basement temperature can damage the mattress if stored for an extended period.

Considering storing it in a place where there will have temperature control during climate changes.

For temperature change can create molds that can damage your expensive mattress.


Step #7. Receiving mattress

When the time comes that you need it, pull it out of the storage.

Just follow the first step during the storage.

It would help if you still had a soda to eliminate the odor during the long period of storage and disinfecting it at the same time.

With that, the next time you want to keep or move your mattress, make sure that its quality will not be ruined by doing it correctly.


To Wrap It Up!

Amazingly, you know now how to wrap a mattress for storage!

Just simple steps to follow that will save you time and money.

So why worry about moving up or upgrading your mattress.

There’s no need to give up the old ones.

With proper handling in storage, you will indeed preserve the value of your lovely mattress.

Who says that it needs too much effort?

It never is a big deal at all.

It is self-fulfilling that you save the mattress that you brought with your hard-earned money.

Try to save your mattress first before disposing of it!

Sign up to our newsletter!