Do you know how to hook up a water tank to a pressure washer? You just have to find where the banjo fitting is located in the tank, attach the threaded, secure the PVC to the inline, lock it with a Teflon tape, and join the barb connector and ball valve. Now, you can connect the hose and utilize the pressure washer. See? It’s that easy! You don’t want to damage your pressure washer, right?
Like all other appliances, there is a proper way to manage a pressure washer. Failure to use and utilize a pressure washer may cause damages to it. How to safely do any job with a pressure washer? First of all, you must know how it works.
Most of us have difficulty hooking up a water tank to a pressure washer. Some think why one has to connect a pressure washer to a water tank. One of the reasons is simply for convenience. To find out more about the inquiry we have above, just keep scrolling.
Steps To Hook Up A Pressure Washer To A Water Tank
The flow of water starts from the water tank going to the hose, and then it transfers to the water pump resulting in the acceleration of water. This pressure makes the water shoot stronger. However, this does not mean that pressure washers use more water than your regular hose. Given the amount of water needed by the pressure washer, you may ask what is why one has even to use a water tank to operate a pressure washer. Having the pressure washer connected to a water tank makes it simpler for someone to clean anything. This section will look at how to hook up a water tank to a pressure washer.
Step #1. Connect the pressure washer to the water tank
The first thing you must do in connecting the pressure washer to the tank is to locate the banjo fitting. This is part of the tank. Next, the fitting must be linked to a threaded, and then an inline must be connected to the Polyvinyl chloride or PVC – note that you have to tighten it using Teflon tape. To attach the hose, you first join the barb connector to the ball valve.
You can now attach the hose after doing all that. Some hose does not have a barb connector, but worries not. You can easily access them from the market. Be sure to secure the barb in place to prevent leakage. After that, connect the hose to the feed line of the pressure washer. If you are someone new with such procedures, you can invite someone you know can help.
Step #2. Open the faucet of the water tank
Make sure to open the faucet of the water tank entirely. Then, squeeze the wand so that air coming from the water pump can be expelled. Also, make sure to use the correct type of nozzle. This will depend on what kind of area or surface you aim to clean. Using the wrong nozzle can cause damages to your target – you may even get also injured – so be careful.
Step #3. Check the pressure
You may have an ideal amount of pressure in your mind that you think is needed for your cleaning, but it seems that your pressure washer isn’t giving you that. You need to review and repair certain things – in most cases, and the repair is straightforward and not costly. The first thing that you must check is the tightness of all your connections. You may have loose connections, so keep an eye on those. This usually happens with the hose. The next thing that you must check is if you have set the spray wand to no-pressure or low-pressure mode. If not, then put it.
You may have also missed a fundamental part. Be sure that you have indeed opened the faucet to its maximum. If you have perfectly done everything that is said and yet you don’t seem to get the correct pressure, it’s time for you to adjust the pressure setting of the spray. If nothing of these remedies works for you, you may now need a little assistance.
Step #4. Enjoy the convenient washing!
Now that you have set up everything you need to hook up a water tank to a pressure washer, you can now clean anything you want using your pressure washer. Just be aware of the proper usage for your safety. There are a couple of things that you must remember. One of these is always to point the pressure washer from living subjects. Another is to secure the spray trigger by inserting a safety lock whenever you’re changing the nozzle or not washing. You may also want to read about best pressure washer detergents.
It’s A Wrap!
At the end of this article, I hope you have learned how to hook up a water tank to a pressure washer. Also, be sure to take note of the safety tips to avoid any damages. Thank you for reading up to this point of the article. Your time and effort are very much appreciated. You may want to read related articles; know how to clean a wood fence with a pressure washer and how to start a gas pressure washer.