Are you wondering how to hang valance over curtains?
Well, if you want to enhance your room, you can try hanging something simple yet elegant across its windows.
For instance, you can decorate your window with a lightweight or a sheer panel curtain and finish it with a valance.
With this window treatment, you can achieve an airy as well as light ambiance.
Valances are available in different styles and widths.
Some valance styles include scalloped edge, traditional swag, faux balloon, and box pleats treatment.
A lot of valances are essentially designed so that you can hang them with the use of a curtain rod only.
However, for some reason, most people think otherwise.
Some even think that it is a must to hang each window treatment on a separate rod. But it isn’t always the case.
You can hang a valance over a curtain.
Confident decorators often combine window treatments onto a single curtain rod.
But of course, you can also mount separate rods for your curtain and valance- whichever works best for you!
Now the question is, how are you going to do it?
Stay until the end of this post because we will teach you how to use the most basic steps.
We have tried to make it as simple as possible, don’t worry.
We will also include some necessary information that will be helpful for you.
What Is A Valance?
For sure, most of you know what it is already and how it looked like, but just in case, some need enlightenment about this.
So, a valance is a type of window treatment made to cover the window’s uppermost portion.
You can hang this alone. But most of the time, it is hanged with curtains, shutters, blinds, and shades.
Valances offer great versatility.
They are elegant decorations that are commonly used to add various polishing to any desired window look.
You can customize them accordingly to keep them as elegant or as simple as you want.
In case you want to hang a valance over your curtain, it can add style, texture, and dimension to your curtain panel.
Furthermore, a valance is also used to add a formal touch to your basic window treatments. This is what people often refer to as polishing.
What Are The Things Needed?
The first step in doing any project is to prepare the things that you will need.
The same is true with treating your windows.
Before you start, you have to ensure that you prepare the right tools that can get the job done.
In terms of hanging a valance over a curtain, you will need the following tools and supplies:
- Tape measure
- Curtain rod
- Wall-mounting brackets
Steps To Hang Valance Over Curtains
How to hang valance over curtains?
After you have gathered all those things listed above, you can now start your project by following the procedure below.
Step #1. Choosing the right hardware
In case you chose to use separate rods for your curtain and valance, you should keep in mind that the brackets to be mounted at the wall of the two rods will vary.
The curtain rod brackets must be one-half shorter than the length of valance rod brackets.
Let’s say; for example, the curtain brackets are 3 inches long; then the valance brackets must be 6 inches long.
Step #2. Installing curtain brackets
Get your tape measure and pencil, then mark the spot where you will mount the first bracket.
If you intend to install longer curtains, you should place the rod high above your window.
Mark the first curtain bracket placement using your pencil and do the same thing for the 2nd curtain bracket.
After you marked them, check whether they are aligned using a level.
If so, drill them into the wall.
Step #3. Installing valance brackets
Also, measure the placement of your valance brackets. It must be a bit higher than the curtain.
Then, mark it as well.
Ensure that they are aligned before drilling them with screws.
Step #4. Hanging the curtain
Perhaps, you will be installing a tab-top curtain; make sure to slide the curtain rod through each tab and then hang it onto the brackets.
In case you use other curtain hardware such as a curtain ring, for example, you must attach it onto the curtain first before mounting it to the rod.
After that, you can then hang the curtain rod onto the bracket.
Step #5. Hanging the valance
Slide the rod onto the valance.
But you might as well use some curtain hardware in attaching the valance onto the rod.
Whichever method you choose, you should attach the rod onto the bracket after.
Then, adjust your valance to ensure that the fabric is evenly spread out.
It’s A Wrap!
Valances are great window dressings.
They come in different weights and colors and can be used in different ways; per se, you can hang them over your curtains.
Before installing them, make sure that the curtain rod you will be using can support their weight.
This is especially true if you opt to use a single rod for a curtain and a valance.
Now, you know how to hang valance over curtains!