How to hang grommet curtains without a rod has become an essential practice based on the fact that it is durable and attractive when properly done.

Contents show

Often, the risk of moving curtain rods around has become a barrier to why some persons find it difficult to fix curtains to their rooms’ walls. But, the good news here is that there are effective ways we can fix curtains without rods.

Nowadays, some homeowners prohibit the installation of rods to the walls because of the rate of damages it may cause to the wall. Hence, the only alternative to maintain a beautifully decorated room without damages is to learn the art of hanging curtains to walls without a rod.

Steps on How to Hang Grommet Curtains Without a Rod

How to hang grommet curtains without a rod is simple to learn and practice. You do the process by using replacements like curtain wire, hockey sticks, pipes, fishing rods, ropes, etc.

I shall start with one of the materials mentioned above, which is the curtain wire. You can use curtain wire to replace curtain rods. When you provide the curtain wire, you also provide steel ceiling hooks, a drill, eyelets, and a wire cutter.

Here are steps of fixing the curtain wire;

Step #1. You have to twist one of the eye hooks in a clockwise direction into the net wire till it strongly fixes well.

Step #2. Use the drill on the window frame where you will hold the curtain wire.

Step #3. On the top right corner of your window frame, you drill a pilot hole.

Step #4. Use your screw in a hook and do it clockwise.

Step #5. You have to repeat the 3rd and 4th steps with the top left-hand corner of your window.

Step #6. You loop the eye provided into the wire. You do this through one of the available hooks.

Step #7. You pull the wire across to the other side and towards the other hook in a straight line.

Step #8. Using the wire cutter, you cut 5cm from the other hook.

Step #9. At the other end of the wire, twist the other eyelet.

Step #10. You stretch the remaining end and loop it in with the other available hook.

Step #11. Create an extra hole at the center of your window frame to serve as additional support.

Step #12. Get your curtain along and put the net wire inside the hook to fix your curtain.

You have to cut your curtain wire very well to have the normal tension stay in a straight line. A novice can always be trying this method until you get used to it. You can use aircraft cable for heavy-duty wire. Heavy-duty wires prevent curtains from sagging.

The use of Coat Hooks to Hang Grommet Curtains Without a rod

Another material to use and replace curtain rods is the use of coat hooks. You do this for curtains with grommets hooked on the coat hooks, though this is stressful, especially in attempting to change the curtain’s position in the room.

You are to use the coat hooks when you intend to leave your curtain in one position permanently.

To successfully carry out the coat hooks, one needs to get about thrice the number of coat hooks to the actual number of the curtain’s eyelets.

You get the needed number of hooks, put them evenly on the top of the window, and then loop the eyelets into the fixed hooks. Alternatively, one can also get a coat rack with multiple coat hooks within it and attach it to the wall.

Can Wood knobs be Used to Hang Curtains Without a rod?

Yes, you can use wood knobs to hang curtains without a rod. In doing this, you need the following materials:

tape
pencil
wooden knob
wood screws
ruler

The procedure for the wood knobs include:

Step #1: On the width of your window, you measure an even spacing for your knobs.

Step #2: Use your pencil to mark the spacing.

Step #3: Use a drill bit to drill holes at the marked points.

Get screws and drill into the hole.
On the top of the screws, you attach the wooden knobs.
At the place where you want to position the wooden knobs, you measure out fabric width.

Step #4: You carefully cut holes on the curtain, which should match with the knobs.

Step #5: It is possible to install knobs where you want the tie-backs to be, that’s for curtains with tie-backs.

Can Ropes be Used With Grommet Curtains Without a Rod?

Yes! You can use a rope with grommet curtains without a rod. Using a rope is similar to using curtain wires which I discussed earlier, though ropes are not as stretchable as curtain wires, so one needs to find ways to generate appropriate tension for the rope.

The materials needed to use rope and hang a curtain without a rod are rope and the curtain rod brackets. When the materials are ready, follow the same steps above on how to hang grommet curtains without a rod and hang your curtain to your satisfaction.

Installation of the Rope Involves the Following Procedures

Drill a tiny hole and fix the curtain rod brackets at the window frame’s left and right sides.
You tie the rope to one of the brackets and tighten the bowline knot until it is well secured.
Through the curtain’s eyelets that you are using thread the other end of the rope.
Tie the second bowling to the other curtain rod hook, then stretch the role and tie firmly.

When you use rope, and your curtain starts to sag, you untie from one of the ends, then retire until it becomes firm.

Conclusion

It is cheaper and less stressful to learn and practice how to hang grommet curtains without a rod. From a good study of this article, one can eventually choose to hang grommet curtains without bothering to provide curtain rods, yet, it will give a fantastic look when properly done.