If you are looking for a neat and pleated look, then back tab or hidden tab curtains are perfect for you. These simple and elegant fabric pieces hung beautifully across windows will give you a tailored and floating look. Here is how to hang back tab curtains with clip rings.
The problem with hidden tab curtains is the fabric’s mobility when you try to open and close your shutters. Luckily, we’ve got a few tricks up our sleeves that will teach you how to hang back tab curtains with clip rings.
You can attach it to the curtain’s top to add length or conceal it behind the fabric by pinching the back of the tabs and clipping the ring on the curtain. Slide it onto the rod, and there you have the elegant back tab curtain that you can easily slide open whenever you please.
Back tab curtains
Different curtains add different visual effects to the room’s interior design. If you prefer a well pleated, tailored, and elegant look, then you should definitely include back tab curtains in your options.
This piece of fabric has a built-in tab sewn at the back lining of the curtain header. It allows you to seamlessly slip the rod through the tabs making it invisible from the front. The hidden tabs give the illusion of a floating curtain and create a relatively clean design.
Unfortunately, these tabs are also pieces of fabric. It gives the top edge of the drapery a relatively firm arrangement, making it challenging to move around. On the bright side, it does help with keeping the tabs and pleats straight and in place.
So why hang it with rings? Some of you might argue that the very purpose of back tab curtains is to achieve a tailored look without fussing over clips and pins’ visibility. After all, seeing clips attached to the curtain does really ruin its entire purpose.
Using clip rings
Clip rings can quickly help you slide your back tab curtains open and shut without worrying about the crisp edge of the fabric hindering its movement. They are also fantastic at assisting homeowners in customizing the length of the curtain.
Using clip rings to hang back tab curtains is a perfect solution for those who want elegant, clean, and floating curtains but also enjoy the flexibility of ring attachments in opening and closing windows curtains.
Hanging process
First, you need your hardware set. This will be a much quicker procedure if you already have your brackets and decorative rod set. But in case it is your first time, you’ll be needing a pencil, measuring tape, clip rings, brackets, your curtain, and a pre-measured curtain rod.
Step 1: Securing brackets
If you already have your brackets and rod in place, you can skip this step.
Mark where you want your brackets to go. The standard is at least four to eight inches above the window sill. Use your measuring tape to mark where the screws should go. Drill the holes and secure your brackets in place.
Step 2: Attaching clip rings
Line your back tab curtain so that the tabs are facing you. You have two options in attaching your clip rings.
Option 1 – Attaching it at the top of the tab.
Place your clip on the top part of your curtain. Slide the rings on the rod, and it is done. This option will let you add length to your curtain without the need for fabric alterations. Achieve puddling of fabric pooling on the floor for a sophisticated and grand look.
With this technique, you can use standard-length curtains and make them appear longer than they really are. You can attach a ring at every tab for tight-looking pleats. Skip one or two tabs in attaching clip rings to achieve a loosely hung curtain look.
Option 2 – Concealing it behind the tab.
If you still want to maintain the cleanliness and floating appearance that a back tab curtain has to offer, you can conceal the ring behind the fabric. Pinch the middle of the tab and clip the ring an inch or two below the top.
Try pulling the ring so that you can see its full length before you slide it across the rod. If it’s attached too far up, try moving it another inch below. Just make sure not to go beyond the hem of the curtain’s tab. Once the ring is attached at your desired length, slide it across your rod.
Step 3: Hang your rod
With your perfectly slid ring already on the rod, attach the final pieces at both ends. Hang your rods onto the brackets and make the necessary adjustments. Now you can easily slide your curtains and move them from left to right, opening and closing the shutters as you please.
Summary
This nifty trick on how to hang back tab curtains with clip rings is an excellent way of letting you customize the length of your curtain without alterations. Or you can enjoy the best of both worlds with a floating and elegant back tab curtain that you can easily pull open using a clip ring.
Regardless of the options that you chose, it is crucial to note that details do matter. No matter how small it may seem, these miniature elements truly help us make that finishing touch.