How To Get Blood Out Of The Pillow? 4 Easy Options To Opt For!

We will show you various options on how to get blood out of the pillow throughout this article. Are you struggling to figure out if there is an effective solution to your pillow’s bloodstain?

You don’t have to worry further because there are efficient remedies for your bloodstained pillow.

how to get blood out of the pillow

Bloodstain on a pillow is not rare.

Every household usually faces the same problem, yet not all have solved it, especially when family members experience nosebleeds and over leaking periods at sleep.

Some people manage to remove the blood on a pillow mildly.

On the other hand, some cover the pillow with a neat pillowcase without cleaning the pillow’s actual surface due to unawareness of the bloodstain remover remedies.

If you are experiencing a similar case, follow the different options for solving your bloodstained pillow below.

 

Remedies To Get Blood Out Of Pillow

The following are the different ways on how to get blood out of the pillow.

You are free to choose between the options depending on which items are already present in your house or if you prefer the stain remover required in a nearby store.

Keep in mind that the longer the bloodstain on your pillow, the harder it gets to remove.

So if the pillow is stained blood for a while now, we recommend you repeat the process several times.

 

Option  #1. Using baking soda

Things needed:  Baking soda, Coldwater, and two clean fabrics.

The time required: 1 hour or more.

Here are the steps:

  1. Please take off the pillow from its pillowcase. Since laundry can handle bloodstained cloth, let it do the job for the pillowcase.
  2. Follow the ratio 1:2, mix one cup of baking soda and two cups of cold water.
  3. Using clean fabric, apply the mixed proportion to the exact area of the bloodstains on the surface of your pillow.
  4. Leave it applied for a minimum of 30 minutes to an hour.
  5. After the allotted time of application, you may now rinse the pillow area using cold water. It’s best not to let too much water sink in the pillow, so it will not take much time to dry.
  6. Grab the other clean fabric and place it above the surface of the wet area of a pillow. Let it absorb the water stayed in the pad for a while.
  7. Dry the pillow using a laundry drier or air dry.

 

Option #2. Using Gonzo stain remover

Things needed: Adequate amount of Gonzo stain remover, Detergent, Brush.

The time needed: 3 hours or more.

Here are the steps:

  1. Prepare your barefaced pillow with a bloodstain.
  2. Using safety gloves, a sufficient amount of Gonzo stain remover to the bloodstain area.
  3. Let the remover product sink on the surface of your pillow for a minimum of 10 minutes.
  4. After the product sink in the bloodstained area, put water mixed with detergent on that surface of the pillow.
  5. Use a brush and gently scrub the blood stained on a pillow. It may take a while, but it’s worth it.
  6. Rinse the pillow using warm water.
  7. Dry the pillow using a laundry drier or air dry.

 

Option #3. Using 3% Hydrogen peroxide

Things needed: 3 % hydrogen peroxide, salt, cornstarch, vacuum cleaner, clean cloth.

The time required: 1 hour or more.

Here are the steps:

  1. Prepare the pillow with a bloodstain.
  2. Make a mixture using a tablespoon of salt, half a cornstarch, and a quarter cup of 3%hydrogen peroxide.
  3. Combine thoroughly until a paste is formed.
  4. Apply the paste formed all over the bloodstain
  5. Leave the paste to dry entirely.
  6. By brushing it away gently, remove the dried paste.
  7. Blot the surface of the pillow with cold water.
  8. Use a vacuum to remove the remaining paste on the area.
  9. Dry the pillow using a laundry drier or air dry.

 

Option #4. Using of ammonia cleaning product

Things needed: Ammonia cleaning product, hydrogen peroxide, salt, clean fabric, cold water.

The time required: 3 hours or more.

Reminder:  Beware of the foul odor of this item. We recommend doing the process in an open area away from children.

This option is usually for the extremely bloodstained pillow, so if you think your case is moderate, skip this.

Here are the steps:

  1. Prepare the bloodstained pillow.
  2. Moisten the stained area by blotting it with a fabric dipped in cold water.
  3. Once the surface of the pillow is wet, entirely cover it with salt.
  4. Leave the pillow applied with salt until it completely dries.
  5. With 3 percent hydrogen peroxide, smear the remaining stain until it starts bubbling.
  6. Spot the stain with a clean fabric until the bubbling ends.
  7. Next, combine one tablespoon of ammonia with one cup of cold water, following a 1:1 ratio.
  8. Apply the mixture to the bloodstain surface of the pillow.
  9. Clean off any traces of ammonia using cold water.
  10. Dry the pillow using a laundry drier or air dry.

Tip: It’s good to plan to reduce bloodstains on the pillows.

If you expect it to happen, consider putting a towel on your pillow or use an old pillowcase in the meantime.

Cleaning alternative clothes are much better than cleaning a pillow itself.

 

Final Words

Although terrifying, bloodstains are not so ominous; it is sometimes possible to clean fresh blood on a pillow with only a cloth and some cold water.

Unfortunately, there is more of a concern with dried bloodstains or stains that have had a moment to settle into your pillow.

Our steps on how to get blood out of the pillow are detailed, and if one doesn’t work, the next one will indeed work.

Note that, if necessary, you can repeat the steps or even combine the methods. I hope we guided you well on how to get blood out of a pillow.

Thank you for your effort that you have reached the last part of this article. We appreciate you a lot.