Are you finding ways on how to fix a water damaged trailer roof? Well, this article will provide you with the relevant knowledge about the susceptibility of trailer roofs, ways to fix them, and preventive measures that could help.
Nothing is more inconvenient than a leaking or otherwise damaged roof. As roofs get old, it starts to deteriorate caused by either physical or uncontrollable factors, like rainwater.
Sometimes, the vulnerability of a trailer roof depends on the quality of the material used. Despite that, nothing does better than maintenance inspection and preventive measures.
By repairing the water-damaged trailer roof before it gets worse, you can extend its lifespan by saving enough resources, instead of trailer roof replacement. Fixing the trailer roof can be done by anyone with enough knowledge and resources.
Nevertheless, you can still call for professionals to assist you with extensive repairs. Similar to this article, read this article on how to repair water damaged pop up tent trailer for more knowledge.
Susceptibility Of Trailer Roof
Most trailer roofs are made up of aluminum or canvas that can withstand a lot of damaging factors. The effects of the environment on your trailer roof are what cause it to deteriorate over time.
Though the trailer roof seems tough, it is still susceptible to different damage. One common reason why trailer roofs deteriorate is because of rainwater, causing water damage or shingles on the roof surface.
The constant exposure to rain has a relative effect on the trailer, though none of these changes happen all of a sudden. As you know, acid rain increases the chance of roof stain because of the corrosive particles it contains.
When the trailer roof has already stained, acid rain gradually destroys the roof surface, and creates a tiny hole where a water leak takes place. Hence, most roof leaks may be avoided, and many can be quickly detected with a thorough inspection.
In addition, acid rain damage on the trailer roof may develop discoloration and streaking. For that matter, the lack of protective coating on the trailer roof is the reason why rain causes water damage.
3 Easy Steps To Fix Water Damaged Trailer Roof
Step #1. Inspect trailer roof
To be able to perform necessary repairs, it is important to check first the trailer roof and assess the severity of water damage. If there are any cracks, tears, or minor punctures in the roof materials which are damaged by water, look for them during a roof inspection.
Step #2. Repair the damaged area
Roof leaks are frequently repaired using roof coatings after the damage has occurred. Here are four effective products that can ease water-damaged trailer roofs.
- EPDM coatings – It is an extremely durable synthetic rubber roofing membrane also known as an ethylene propylene diene monomer. Thus, property insulation will be improved with leaks repaired and an additional layer in place.
- Eternabond – It is a sealant tape that seals any rip, tear, or open seam on any roof surface.
- Rubberized leak stopper – It is usually formulated to penetrate deep into damaged areas and stop roof leaks.
- Fiberglass repair tape – Reinforces repair areas and has high mechanical properties.
Step #3. Apply protective coatings
Aside from stains, splotches, and discoloration, water damage can take on a more sneaky approach. With that matter, here are four types of roof coating that could prevent water damage on trailer roof:
- Aluminum coating
The aluminum coating material is a low-cost option for protecting and extending the life trailer roof. It contains asphalt and petroleum solvents that are mixed with aluminum fibers, while it provides long-term protection as well as a highly reflective surface.
- Acrylic roof coatings
Acrylic roof coatings are liquid materials that preserve your roof while also providing a high level of resistance to rain and the sun’s UV rays. It is usual for roof material to expand and compress when the temperature rises and lower, but through the use of an acrylic coating, your trailer roof will remain cohesive.To apply this sort of coating, first, clean the water-damaged roof surface, then repair any major cracks degradation on your trailer roof before coating. The coating adheres like conventional paint, yet it provides long-lasting acrylic covering in just a few coating applications.
- Silicone coating
Silicone coating is a good type of adhesive and coating solution for dents and cracks on your trailer roof, while it lasts longer than most other materials. Further, silicone provides good insulation and protection from rain and snow, therefore preventing leaks and water damage are its main edge.
- Adhesive coating
This type of coating is particularly popular due to its ease of application and long-term durability. Thus, adhesive coatings are usually rolls of adhesive films with protective layers already applied, which provide not only water protection but also good insulation.
Conclusion
Even if your trailer roof is as durable as it can be, water may leak into it, and may cause stains, mold, and further deterioration. In that matter, knowing how to fix a water damaged trailer roof should be your top priority.
Similar to this article, read the steps on what to do with a water damaged camper trailer for a fun and hassle-free travel adventure.