A recliner chair is helpful during stressful moments, but it’s no use if the back is broken. In this article, you will learn how to fix a recliner chair back easily.
Continue reading as we guide throughout the whole repair process. You don’t have to worry since you can easily do this at the comfort of your own home.
How Do You Fix A Recliner Chair Back?
Step #1. Remove the recliner chair back
First off, stand behind the recliner chair and carefully lean it forward, but do not make it stand upside down. Then, locate the locking brackets at the back of the chair. These are not very visible, so you might as well use a flashlight and a flathead screwdriver to find them easier.
Looking at the locking brackets, you will notice that you can pull them upward or downward. When the bracket is facing downward, then the bracket is locked. Pulling it upward will unlock it.
Unlock the locking brackets on both sides of the recliner chair. Following that, return the chair to its upright position. Then, cautiously move the back of the chair side to side to carefully remove it upwards.
Step #2. Install the recliner chair back
When re-installing the back of the recliner chair, start with positioning the back of the chair on the side arms so that it rests directly above the slots. Then, carefully lift the back to align it with the brackets.
You can now start putting the back down to the body of the recliner chair. Ensure that you align the back with the back brackets perfectly. Otherwise, you will not be able to put it back correctly.
Pull the locking brackets downward to secure that the back is completely locked in its place. After that, check whether you fixed the back correctly or not.
To do so, slowly move it from side to side. In this case, you will see if the back gets removed from the body or not.
If the back does not move and is strong enough, then you have reinstalled it successfully. However, if one of the sides appears to be moving out of place, brackets are most likely not properly installed at the back. Therefore, you must remove the back and perform the same steps as before.
Three Different Types of Recliner Chair Backs
Fixing a recliner chair back is easy. However, the procedure on how to fix them sometimes depends on the type of recliner chair you are using. With that, here are three different kinds of recliner chairs and a quick instruction on how to fix them.
With locking levers
If you have a recliner chair with locking lever backs, you will see that the brackets are mounted on the sides and are pretty well-positioned. In this instance, you will need to lock the chair into the metal poles that come with it while flipping it downwards.
With locking catches
When talking about recliner chairs with locking catches, they will lock into place once you’ve finished slipping the back on. If you think the chair’s back needs to be firmer, consider removing the bracket fasteners and then tightening them. To properly position the tab in its slot, a flat screwdriver is always helpful.
Bolted back
How about recliner chairs with the bolted backs? First, notice the lower side of the rear panel. You will need to loosen them up a bit.
Next, you will see the bolts hidden beneath the recliner chair. So, you will need to remove them also.
Things To Remember About Your Recliner Chair
Having a good place to rest is a good idea, and getting a recliner chair is the key to it. Nonetheless, having a recliner chair comes with different things to remember. With that, the following are some things you need to keep in mind:
- Never use or operate the recliner chair if you haven’t re-installed the recliner chair’s back to its body.
- Ensure that you have fixed the chair back and that you have locked the levers carefully. Otherwise, it would be dangerous.
- Do not lose hope if these procedures do not work. Sometimes, you only need to recheck or have someone to help you in working with your recliner chair.
- Do not try to repair your recliner chair immediately. Check first if there are minor problems such as food, dirt or debris stuck on the recliner chair. Sometimes, recliner chairs only need to be checked and cleaned first.
- Always ensure your safety. Practice the right way of removing and reinstalling the recliner chair back to avoid accidents and harm.
Conclusion
People need to have a place to rest after working hard, but it should never be in a broken recliner chair. In this article, the problem is already solved! After reading this guide on how to fix a recliner chair back, you can now repair your recliner chair and have the best comfort of your day.