How To Fix A Broken Bed? Easy Steps To Fix 3 Kinds Of Breakage!

How to fix a broken bed? There are three interesting steps on how you can do so; the steps are straightforward, so there’s nothing for you to worry about.

Indeed, a broken bed can cause dozens of factors that can affect our sleeping habits, quality of sleep, and a less effective immune system when one is sleeping on it for a long time.

how to fix a broken bed

It is crucial to have a bed unbroken because it serves its purpose in holding the mattress in place and gives you a comfortable sleep. When a bed isn’t as comfortable as it was before, then it’s time to buy a new one.

But what if you want to fix it on your own to save money? Then you’re on the right track!

If you want to know the steps in fixing a broken bed, keep on reading!


Types Of Breakage And Steps To Fix A Broken Bed

In fixing a broken bed, you need to consider a significant factor: the type of material used in making the bed. It will decide how you will fix the bed.

Metal and wood are the commonly used materials in making beds. In wooden beds, they will require a bit of woodwork. On the other hand, the most preferred choice of fixing will be welding in metal beds.

Additionally, the type of breakage on a bed is crucial in knowing what to fix. As there are different types of breakage in a bed, you need to take a few different approaches to fix your bed.

So, how to fix a broken bed with these three different types of breakage?


Fixing cracks and splits in beds

Here are the steps for you to fix cracks and splits in beds:


Step #1. Smoothen crack

By using sandpaper, smoothen the sides of the crack.


Step #2. Clean

To make it easier for the glue to stick the two sides of the crack, dampen a cloth and wipe the area with it.


Step #3. Measure

Use a clamp to measure the sides of the crack. To do this, you should be able to secure them tightly.


Step #4. Use wood glue

Before you do anything else, you might want to use an old cloth or shirt to catch excess glue to protect the floor or any furniture close to you. Once you have guaranteed the safety of your furniture, generously apply wood glue to each side of the crack.


Step #5. Clampdown, scrape, and leave

Remove the clamp from the area. Then, using a putty knife, scrape off any excess glue and leave the glue to dry overnight for a stronger bond.


Step #6. Smoothen the surface

Once it has been left overnight, use sandpaper to remove any excess glue to create a smooth surface.


Step #7. Consider additional support

Since the crack is now fixed, you might want to consider some additional support to your bed to avoid another damage or split incident in the future.


Fixing broken bed slats

Now, here are the steps in fixing your broken bed slats:


Step #1. Remove broken slat

You might use a screw to get the bed slat out, depending on the type of bed you have. Then, after you got it out, you can either throw it away or reuse it for something.


Step #2.  Measurement of the slat

Using a tape measure, you need to know the length, width, and thickness of each slat. Then, go to your nearest hardware store and buy a replacement for your broken slat after getting the dimensions.

If you can’t find an exact copy of your slat, you can focus on getting the correct thickness and width. You can then cut the length for later.


Step #3. Lining up

Once you got your replacement ready, it’s time to line up the new slat alongside the other slats.


Step #4. Secure in place

Place your new slat into position and screw it in depending on the type of bed you have. To ensure the attachment, add some wood glue if the bed is wooden.


Fixing an unstable bed joint

Here are the steps to fix an unstable bed joint:


Step #1. Remove the joints in caution

If needed, use a rubber mallet to do this.


Step #2. Inspection

Inspect the joint after you got it out. Remove dried glue (if there is) with a chisel.


Step #3. Use wood tape

The tendon of a bed joint is a part that connects to the bed frame. Apply wood tape to the tendon in most instances. It is where it is usually loose.


Step #4. Use wood glue to the slot

Try applying it generously to all of the sides of the slot. To help you achieve this, use a putty knife and spread it to all corners of the slot.

Step #5. Re-attachment

Once you applied the wood glue, re-attach the joint by hammering together the pieces using a rubber mallet.

Step #6. Put metal brackets back

If you have removed the metal brackets, put them back on. If it has been damaged, you should use new ones.


Step #7. Leave the glue to dry

Wait for the glue to dry overnight. After drying, you can start putting weight again onto the joints. If you want to learn more about broken beds, click here. If you have other problems on your bed besides mentioned above, this article might help you out.



The primary objective of a bed is to provide a comfortable sleep for you.

Once it’s broken, it doesn’t stay true to its purpose since broken beds have the potential to be hazardous.

These days, buying a new bed is quite expensive. That’s why we have provided you detailed steps required to fix commonly know bed problems!

Now, you will not only save money but also know how to fix a broken bed.

Leave a Comment