How To Dye Bed Sheets? 6 Easy Steps & More!

How to dye bed sheets?

We consider color as an important factor in choosing bed sheets.

Due to wear and tear, the color of a bed sheet fades and becomes a little dull.

While it is alright to consider buying a new sheet as an option, there is an alternative to that.

You might choose to dye your bedsheets instead.

Dyeing your sheets is a fun and easy task to do.

You can choose a variety of colors for your sheet!

On the one hand, you can dye a solid color to one of your sheets.

If you want combinations of different colors, you can also tie-dye your sheets.

 

What Are The Things You’ll Need In Dyeing Your Bed Sheets?

Here are the things that you need:

  • Sheet
  • Washing machine, a large container, or bathtub
  • Hot and cold water
  • Fabric dye
  • Salt
  • Gloves
  • Long stick or long spoon
  • Plastic container

Here are the things needed for tye-dying:

  • Sheet
  • Coldwater
  • 1 to 4 colors for tie-dye
  • Rubber bands
  • Dropcloth
  • Gloves
  • A container for each color
  • Plastic container

 

Steps To Dye Bed Sheets

Techniques applicable to dyeing other garments like shirts and pants are also applicable to dyeing bedsheets.

For example, bed sheets made out of wool, cotton, silk, nylon, linen, and rayon can be dyed.

Water-resistant materials might not accept the dye well.

So, how to dye bed sheets?

 

Step #1. Washing the sheets

Wash your sheet using hot water, especially if it is new.

Washing is also required for an old sheet to get rid of dirt and oils that can prevent absorption.

Soak the sheet first in stain remover; if there are some prominent stains, then wash using hot water.

Remember that no detergent is used, and don’t dry the sheet as it will prevent the sheet from accepting the dye more easily.

 

Step #2. Soaking the sheets

If you’re using a washing machine, fill the basin with hot water, then add the dye and sheet.

Soak first for about 30 minutes before rinsing your sheet.

To set the color, wash the sheet with cold.

If you’re using a bathtub or a large container, fill about ⅓ of its volume with hot water (49-60 degrees Celsius or 120-140 degrees Fahrenheit).

The water should be enough to submerge the sheet but not too much it will make it difficult to achieve the desired color.

 

Step #3. Mixing the dye

Mix your fabric dye.

Use 1-2 cups of hot water for every box of dye.

It is better to use boiling water as it will ensure that the dye is evenly mixed.

You can also use natural dyes instead of synthetic ones.

After mixing, pour it in the bathtub or container, then add 2 cups of salt for every 2 boxes of dye used.

Check the color if it is darker or lighter than desired by dipping a paper towel.

 

Step #4. Soaking it further

Use gloves to avoid staining your hand, then submerge your sheet.

Place your sheet evenly on the dye bath and stir continuously for ten minutes to avoid wrinkles.

Leave the sheet for 30 minutes while stirring in every 3-5 minutes interval.

You can soak the sheet longer if you want a darker color.

 

Step #5. Removing the sheets

Remove the sheet, then drain the tub.

Squeeze the sheet well to remove excess dye, then rinse it on the tub.

Use the plastic container while you wring the sheet.

Continue to spin cycle if you’re using a washing machine.

Rinse the sheet thoroughly later in cold water until the water runs clear.

 

Step #6. Rinsing the sheets

After rinsing the sheet, wash it in mild detergent and cold water.

You can put it in a dryer or hang the sheet when done.

 

Steps How To Tie-Dye Your Sheets

My friends, here are the steps on how you can tie-dye the sheets:

 

Step #1. Washing your sheets

Before dyeing, wash your sheet with hot water but no detergent.

Remember not to dry it.

To avoid having a messy workplace, spread some dropcloth in your area.

 

Step #2. Mixing the dye

Mix your dye.

It is more convenient to buy a tie-dye kit for this project.

If you’re mixing your dye, use different containers for each color.

You can also use squeeze bottles to have more control.

 

Step #3. Folding and twisting

Fold and twist your sheet, then secure using rubber bands

You can maintain a space of 4-5 inches in between each wrapping.

Check this for different patterns you can use for tie-dyeing your sheets.

 

Step #4. Submerging the sheets

Protect your hands with gloves, then dip your sheet on the dye.

You can submerge the entire sheet if you’re using only one color.

If several colors are used, dip different parts of the sheet on each color.

Apply colors to different sections when using squeeze bottles.

 

Step #5. Separating the sheets

Place the sheet in a separate container for 20 minutes after dying.

After that time, cut the rubber bands and unfold the sheet.

Rinse it in cold water until it runs clear.

 

Conclusion

How to dye bed sheets?

You might want to dye your sheets to improve or add a new color.

You can either dye a solid color or tie-dye your sheets.

There are simple steps you can follow to renew your dull-colored sheets.

That’s all about dyeing bedsheets.

I hope you liked it!

Leave a Comment