How to disconnect a washer? There are three easy steps involved, and these things I’m sure you can execute with a breeze.
When arranging your home, primarily appliances and things are being moved around the house to ensure that the positioning of things goes smoothly and looks clean at all. Though in this case, it is different. A washer is an object that will be placed in one location, meaning you cannot disconnect it that easily.
It can usually be found in one place, meaning it should be in your basement, outside, washer room, or many different areas where you would like to place your washer. It will be sitting in that place for years, months, and weeks since there is no need to move the machine around. However, what if you want to move it? First, you should know the process’s basics, so you ask yourself how you can disconnect a washer? It takes a lot of methods to complete it, so you must carefully read the instructions given to you one by one. It will take some time, but I promise you that it will be worth the time you’re spending on disconnecting.
Steps To Disconnect A Washer
How to disconnect a washer? It will be a long process but will make it shorter for you to have an easier time accomplishing it. To do that, we have steps especially made for you so that you can be prepared; use it as a basis to disconnect all connections present in the washer:
Step #1. Turning off the water valves
If it is for the disconnection, the valves are the first thing you should remove since the water source for the washing machine comes from. If left open, it may overflow, causing damage to the device. It can usually be seen behind the washer or in a washer box attached and can be located at the rear. To remove the water valve connections from the washing machine, you must turn them off clockwise until you cannot turn them further. This indicates that the water valves are locked and that water spills will not occur if you accidentally tear or touch a hose in the further steps that are going to happen.
Step #2. Putting the machine by pulling or dragging it away from the wall
Now for this step, you can do it either by yourself or with someone you know who can help you carry the machine. Please note that it will be hard to maintain since it has machinery that makes it heavy on its own even without the contents of garments or water present inside the washing machine.
There are two parts to accomplish this step: whether you are working alone by yourself or with a partner. Firstly, if working alone, you will have to grab from one side and move it forward slowly, making sure that it doesn’t make any sound.
Then afterward, repeat the process on the opposite side of the machine. Now, if you have someone to help you out, you can accomplish it by pulling both sides simultaneously so that the machine will stay far from the wall, making space for the back of it to expose and not have any problems dealing with it whenever needed. Take note to slowly pull the machine as far as you can to avoid stress on the hoses; they may rip, and water can spill from it, causing the electricity to spark. Ideally, we recommend that the space from the back fit you to go from behind the machine. Now then, unplug the device to ensure safety afterward. Click on this link to know LG washer making loud noise when spinning.
Step #3. Detaching or removing all the hoses
Now that it has come to this, you should be removing all your hose connections from the washing machine. Several connections are needed to be removed, and today, we’ll be detaching all of those. To start, here are some of the connections that we will release to disconnect. You’ll have to turn the top of the screw from the machine, especially if they are attached to some clamps. Why? It will be a tight fit that will be hard to remove, if ever. Then, the ends of your hoses are directed to the bucket for any water in there to drain. As an alternative, you may place these in the drain along with your box for the washer.
Now from the wall; to do that, you will have to turn the ends counterclockwise until the hoses detach from the machine. If necessary, you may need to use pliers or a pipe wrench, especially if the washer hasn’t been touched for some time. Lastly, removing the drain hose is what you should do next. It is located at the rear part, and each process requires a different removal process to disconnect it. Consult some instructions if you are not familiar with how to do it. It’s best also to know how to clean washer drain hoses.
It’s A Wrap!
Learning how to disconnect a washer has never been this easy! Now that you know how to do it waste no time and use it to see if it works. You might also want to know how to prepare the machine for moving if you do not have any ideas on how to do it. If you are interested in washers, we can recommend some great reads about them. You can learn more and, of course, read it if you would like. Here’s an answer on how many cubic feet is a large capacity washer. It’s best to also know washing machine buying tips.