How To Disconnect A Dryer? 7 Easy Steps For You!

Are you wondering how to disconnect a dryer; disconnecting a dryer is pretty simple, just by turning off the power, disconnecting the dryer, and disconnecting the dryer vent and hose.

A dryer isn’t something that moves up about the home very regularly. The dryer is usually situated primarily in the basement of a house, a specialized garage, or laundry room, and it spends the great majority of its lifespan there. 

how to disconnect a dryer

However, there will be instances whenever the washing machine must be relocated. Whenever the appliance is moved or changed to a different location, the hoses, and cables that feed it with power and water must be unplugged. Following guidelines will cover the basics of disconnecting the dryer and preparing it to be moved from its actual place. Let’s check it out!


Steps To Disconnect The Dryer

Now in homes, dryers are the most common fixture, and because of their length and sturdiness, it could be challenging to relocate, if only to adjacent areas. 

It’s not very easy to operate the dryer and fit it properly; two people are needed. Therefore, the first thing to do in transporting a dryer is disconnecting it. It is a one-person job that can be accomplished well before the dryer can be relocated. In this article, you’ll learn how to disconnect a dryer, and we have mentioned some simple steps below that help you file with this issue.


Step #1. Turn off dryer valve

The cold and hot water supplying valve is typically found beneath the dryer, even in a wall-mounted dryer box. Move the valve outward till it can’t be twisted that far to turn it out. You should turn all valves off right now. Then, if you unintentionally damage a pipe, it will prevent you from significant spillage. You may also be interested to read how to tell if your dryer vent is clogged.


Step #2. Disconnecting the dryer

You can disconnect the dryer machine from the wall by pulling or dragging it. If you’re dealing independently, take one edge and pull forward and repeat the same step for the opposite side. If you need assistance, try to remove it on different sides simultaneously. Take the dryer out of its place as far as possible, but be careful not to yer hoses. Damage if you notice that your dryer is far from the wall, then you can quickly move it one little behind towards the wall. I suggest you read about how to safely disconnect a gas dryer


Step #3. Unplug the dryer

Keep in mind the machine is turned off, and the plug is removed from the socket. It’ll also turn off the dryer machine’s source of electricity.  Inspect to see whether any garments remain in the dryer by opening it. If you leave any clothing on, take these off right away. Clean anything lint that has accumulated on the lint screen. Close the dryer and ensure that the knob has been set off. 


Step #4. Unplug the dryer cord

Remove the dryer cable from the plug socket upon that wall and disconnect it. To prevent breakage to the cord, wrap it around and allow it to sit on the dryer. Move the dryer aside from the wall with caution, taking caution not to scratch the flooring. If you have an electric dryer, first turn off the main power. Turn off the gas pipeline line to a dryer if it’s a gas dryer. Including a flexible screwdriver, disconnect the gas line from the dryer. While disconnecting the cable, spin the wrench circular to loosen it.


Step #5. Remove the dryer hoses

If the clamps are connected, loosen them by turning the bolts above the clips outward. Next, push the hoses’ ends toward your bin to remove excess water. Otherwise, you may put these in the drainage inside the washer’s bucket. Check again that the vents are all turned out when you do this.

Many tap knobs are simple to stop and turn on accidentally and may well have happened while you relocated your dryer or stood alongside it.  Allow a little time after shutting down all valves before eliminating the hoses since it will enable the hoses’ pressure to subside, making them simpler to detach. It’s possible that turning out the several different taps around the home would assist it empty faster. It may also be a good idea to know why a dryer make a noise when tumbling


Step #6. Detect the hoses from the wall

The hoses must be removed from the walls. Detach the hoses by turning their terminals round. If the machine is still not unplugged for a while now, you will have to remove the connections pipe wrench or adjustable pliers. 


Step #7. Remove the drain hose

Empty all residual water from the buckets after doing all the above steps. Next, the drain hose should be removed from the drain. Based on your drainage configuration, it may be a wall-mounted drain, a laundry sink, a tall stand-pipe,  or floor draining.  Everyone needs a somewhat unique hose removal procedure. If this is not exactly evident, check the guidelines that came with the dryer. Now your dryer is disconnected entirely from the wall.


It’s A Wrap!

 We were hoping that reading this article is just fun for you, and also, after reading it, you will understand how to disconnect a dryer. The steps mentioned above are beneficial in parting the dryer; just read them carefully to understand.  Thank you, friends, for sticking with us!

Leave a Comment