You can enjoy all the benefits of this gaming chair for a long time if you take care of it properly. Arozzi Monza Series Gaming Racing Style Swivel Chair is designed to be durable and last a lifetime, but how do you know how to clean or disassemble it?
The following instructions will provide you with how to disassemble an Arozzi gaming Swivel Chair.
How do you Assemble an Arozzi chair?
Step 1. Verify that all parts are in the box before beginning.
Step 2. Attach the backrest to the seat base with four bolts and nuts.
Step 3. Insert one bolt into each of two upper holes on both sides of the armrests, then thread a washer onto it and insert a nut for securing them together.
Step 4. Use your fingers or pliers as needed to tighten these down securely in place. (Note: The Arozzi Monza Series Gaming Racing Style Swivel Chair assembly instructions will provide you how to assemble an arozzi chair)
How do I Adjust my Arozzi Gaming Desk?
Step 1. Sit back in the chair and locate how high or low you want your desk to go.
Step 2. Use a screwdriver to remove one bolt at a time from the holes on either side of the arms, then reinsert them into another hole that is higher up or lower down as needed until you have it where you need it.
Step 3. Tighten each with an Allen wrench (or similar).
Can I move my Arozzi Gaming Chair?
Yes, the Arozzi Gaming Chair is designed to be moved.
Step 1. Use a screwdriver to remove one bolt at a time from the holes on either side of the arms, then reinsert them into another hole that is higher up or lower down as needed until you have it where you need it. Tighten each with an Allen wrench (or similar).
Step 2. Once in position, replace any bolts removed earlier and tighten securely using Allen wrenches (or similar).
How do you Fix a Chair That Won’t go up?
If the chair won’t go up, one of the gears is likely stuck.
To remedy this problem, try to move both arms at once in opposite directions and see if you can free up the gear. You may also need to remove some bolts on either side of the armrests as needed until you have it where you need it with enough space for a screwdriver (or similar) so that you can get behind them more easily.
Tighten each bolt before removing any others by using an Allen wrench or a hex key (standard size is usually about six inches long).
Once there, use your fingers to gently nudge around whatever looks like it might be causing trouble – if something moves then stop and go in the other direction.
If you’re having trouble figuring out how to remove a screw with your fingers, try using an Allen wrench or hex key to loosen it by turning counterclockwise if possible and then use both hands on either side of the bolt head. With enough force, you should be able to turn it at least just past hand tight before being able to unscrew it all way off with your fingers (which is also how things get tightened).
Once removed from their positions, take the armrests apart piece by piece until they are fully dismantled and ready for reassembly later on when you want/need them again.
What Makes This Swivel Office Chair Different From Other Chairs?
This racing style swivel office chair features PU leather upholstery in several colour options and with armrests or without armrests. It also includes height adjustable arms, padded headrest cushioning and lumbar support pillow to make long hours working more enjoyable than they would be on any other type of chair!
The Arozzi Monza Series Gaming Racing Style Swivel Chair has a modern design and is available in black/grey!
The Arozzi Monza Series Gaming Racing Style Swivel Chair has a weight capacity of 250 pounds and is very easy to assemble, which means that you won’t have to wait for help before getting started!
The Arozzi Monza Series Gaming Racing Style Swivel Chair includes everything necessary for assembly: the chair itself
- Metal gas lift with anti-tilt feature
- Backrest adjustment knob
- Armrests (with or without padding)
- Height adjustable arms.
Steps on Disassembling Arozzi Monza Series Gaming Racing Style Swivel Chair
Step 1. Unscrew the screws from the arms of the chair and slide them off.
Step 2. Use a screwdriver to remove all three bolts that hold on each side panel, then unscrew them using your fingers.
Step 3. Slide these panels off by pulling firmly but carefully in order not to break any clips or tabs that might be holding them in place.
Step 4. Slide the bottom panel off by pulling it towards you and away from the back of the chair, then unscrew each bolt that you find on this side with a screwdriver.
Step 5. Pull out any stuffing or padding material to remove anything trapped inside before putting your swivel chair back together again.
Step 6. Slide all three panels (sides and seat) onto the base once more, then tighten everything down until they are snug but not tight; don’t overtighten bolts because this can warp them over time!
Step 7. Finally, turn your Arozzi Monza Series Gaming Racing Style Swivel Chair upside down so that it is resting on its arms instead of sitting flat on a surface like before.
Step 8. Put furniture or something heavy on one of the arms to help hold it in place, then unscrew and remove any bolts that are currently holding your arm in place.
Step 9. Once you have removed all four bolts, use a screwdriver to undo the metal clamps holding each side panel onto the backrest before removing them completely from the chair’s structure; make sure not to lose these!
Remove the two screws at either end of the now exposed crossbar and lift off the seat plate only slightly so that you can access its underside for lifting out more hardware with your fingers (or pliers).