4 Ways On How To Create Humidity In A Small Greenhouse For Mushrooms - Krostrade

Welcome to the Krostrade Marketplace, please excuse our appearance, we are still under construction.

4 Ways On How To Create Humidity In A Small Greenhouse For Mushrooms

If you’re wondering how to create humidity in a small greenhouse for mushroom, the best way is to have humidifiers. Yes, you read it right; you might need humidifiers to provide the ideal humidity for mushrooms grown in a small greenhouse.

Mushrooms do not contain chlorophyll, allowing it to survive without needing sunlight, unlike most plants. But of course, it does need certain factors to survive. The ideal light, water, and heat will aid the growth of your mushrooms. Therefore, you must consider these factors for you to have a good yield. 

how to create humidity in a small greenhouse for mushroom

Creating Humidity In A Small Greenhouse For Mushroom

Let me ask you something, is your skin dry? If so, you’d apply moisturizer to bring back the hydration unto your skin. But did you know mushrooms are somewhat like that? Mushrooms require an adequate amount of moisture to avoid water loss. 

Well, here are the ways on how to create humidity in a small greenhouse for mushroom:

 

#1 Humidifiers for creating humidity for mushroom

As I have mentioned earlier in this article, humidifiers will help you with this one. Since there are different kinds of humidifiers, we’ll understand how each of these can help.

 

By using wicking humidifiers

This kind of humidifier draws off moisture from the water in the reservoir all over a large area. It then evaporates the water with the help of a fan, increasing the humidity in the growing area of the mushroom.

However, this type of humidifier might be suitable for mushrooms that only need a smaller relative humidity percentage. Since wicking humidifiers cannot raise the relative humidity by up to 85%; because most types of mushrooms require an RH of at least 90% when fruiting.

 

By opting for an ultrasonic humidifier

This type of humidifier is best for growing mushrooms. Ultrasonic mushrooms have a spinning disc responsible for vaporizing water droplets. The number of discs would determine the amount of humidity it can produce.

The ultrasonic humidifier will then pump out vaporized water droplets all over the growing area. It is the best humidifier for growing mushrooms as it raises the relative humidity to 100%.

Most mushroom growers would place humidifiers inside the fruiting area, but you can also put it outside your chamber and pumped in. Pumping in humidity would be beneficial as it also brings in the fresh air, reducing CO2 levels resulting in better fruit.

Moreover, we suggest you’d choose an ultrasonic humidifier with an on/ timer to avoid too much water pumped out of the unit that could drown your mushrooms or create wet spots. The humidifier is ideal for a 4×8 to grow room and even 4 tier greenhouse set up.

 

By placing a multidisc floating ultrasonic humidifier 

By its name, this humidifier has multiple discs that float on the top of the water. Just place the float in a bucket of water and point a fan to the bucket. 

The multidisc floating ultrasonic humidifier is incredible as it can put the area at the right humid level in just for a few minutes or hours.

Just a reminder- it’s a must always to change the water when using this type of humidifier. By that, you can avoid moulds and bacteria from growing in the substrate, so you’re sure of the quality of your yield.

Additionally, you can place the fan outside the growing area to avoid damage due to the humidity of the place. Also, you can change the disc when it burns out because of too much use. 

 

#2 Spray water to keep the humidity

Indeed, all these types of humidifiers are great for your mushroom. It will provide the humidity you need. However, if you want a simple way to create humidity, then a spray bottle would be enough for a 4 tier greenhouse. 

Spray water to the walls of your chamber and fan that lets in the fresh air. You have to be diligent as you need to mist many times a day to maintain the humidity inside the greenhouse where your mushroom grows. 

Avoid spraying directly to the substrate of your mushroom since it could damage it. Hanging a wet sheet will also help in creating a humid environment for the mushroom to strive.

Maintaining the humidity is very important in a small greenhouse since mushrooms stop growing during the dry season. Be mindful of how much water you are giving as it could drown and damage your mushrooms.

 

#3 Consider proper lighting

Now that you know how to create humidity for your mini greenhouse, you’d want to consider the light inside if it is suitable for the mushrooms you are trying to grow.

Mushrooms are a fungus that dwells in almost any place as long as it’s moist. Again, a mushroom does not need any sunlight, so you might want the small greenhouse to be as dark as possible.

However, it doesn’t mean they don’t need any light at all. Mushrooms found in the wild often grow in shady areas and wooded areas where they can receive some light. A dim light such as a fluorescent light would be enough for your mushroom, but only for a few hours. 

Remember, if you want to create the right humidity for your mushroom, consider proper lighting.

 

#4 Keep the right temperature

Moving on to temperature, 70°F would be ideal for mushrooms. However, commercially grown mushrooms require a temperature of 55°F and not more than 60°F to yield much fruit.  

Wild mushrooms are different from the commercially grown mushroom in terms of environment and how it is grown. Mushrooms that grow in the wild would feed off from dead trees and even decaying animals, making it dangerous to consume. 

In contrast, commercially grown mushrooms are safe to eat since growers make sure that all the elements involved for its growth are well-controlled. So, if you want to want to create humidity for your small greenhouse, then know the right temperature the mushroom can properly grow.

 

Conclusion

We hope that this article helped you understand how to create humidity in a small greenhouse for mushroom; as well as other factors that are suitable for the growth of your mushroom too. Thank you for reading, and have a good day!

Leave a Reply

Your email address will not be published. Required fields are marked *

How To Grow Mexican Heather. 3 Steps To Success

How To Grow Mexican Heather. 3 Steps To Success

You only need to overcome three steps to know how to grow Mexican heather. This compact perennial is unique not just because of its looks but also with how easy it thrives amidst hot conditions. However, do note that Mexican heather plants don’t do as well in cold regions. 

Before you give them up, you may also find it comfortable to grow Mexican heather in the greenhouse. Remember that the stable indoor conditions in the greenhouse make it ideal for starting plants. However, it can also offer protection to plants that don’t tolerate extreme climates. 

 

How To Plant Mexican Heather

 

Step #1. Planning and preparation

 

Timing

The first step in growing Mexican heather is planning and preparing to guarantee success. You want to check your calendar on when is the best time to plant Mexican heather. If your climate is similar to the Mediterranean regions, you can easily plant Mexican heather at any time

However, it’s generally ideal for growing this plant late in fall, so it has established itself before the temperatures get challenging. And as you can assume, you will need to grow Mexican heather in the greenhouse if your area has harsh winters. Starting Mexican heather from seeds indoors will guarantee flowers in the summer.

 

Location

After determining when to plant Mexican heather, you must prepare the site for your plants. Remember that the location is crucial to guarantee the steady growth of any plant. Therefore, you may benefit from starting Mexican heather indoors if your climate is fluctuating. 

In general, you want somewhere with fertile and well-draining soil. Test your soil to do the necessary amendments and improve its structure. The plant also does best with some shade because the full sun affects the foliage’s health. 

 

Step #2. Planting

After you started Mexican heather in the greenhouse, gently take the plant from the pot. Make sure to untangle and loosen the roots before setting the plant in the center of the hole. Allocate a space of three feet between each plant, and the top of the root ball should be half an inch above the ground. 

 

Step #3. Maintenance

Maintaining the newly planted Mexican heather plants is no different from other plants. You want to keep soil moisture to help the plants establish themselves. However, be sure not to create a wet environment that can decay the plant. 

Adjust your watering practices according to the weather. Mature Mexican heather plants will tolerate challenging conditions like drought and summer heat. However, it’s best to provide two to six hours of partial shade instead. 

 

 

How To Propagate Mexican Heather

 

Seeds

You can grow Mexican heather from seeds similarly to other flowering plants. Use pots with standard potting mix for sowing, and then add some soil over the seeds. Maintain soil moisture, and you can place the pots in the greenhouse to protect the seedlings from the environment. 

 

Cuttings

You can also root cuttings from a healthy Mexican heather plant. Take a four-inch stem section, remove its lower leaves, dip the end in rooting hormone, and then plant in a pot with soil. Continue watering until root establishment for transplanting. 

 

Division

Division is an excellent way to grow Mexican heather and also keep the plants from overcrowding an area. Gently loosen the soil around a plant to make lifting easier and divide the root ball into sections using a sharp and sterile knife. Depending on its size, you can get up to four divisions for transplanting in containers or onto the garden. 

 

Caring For Mexican Heather

 

Water and fertilizer

While Mexican heather can tolerate dry conditions, it would still be optimal to keep them well-hydrated. You can water the plants deeply once per week, but ensure that you’re using a well-draining medium and container. Then, wait for the ground to dry in between waterings to avoid creating standing water. 

Remember to adjust the frequency and amount of water you give to the plants. More so, container Mexican heather plants would dry faster, so water them often. You can also mulch every spring to maintain soil moisture and even smother weeds. 

Do you fertilize Mexican heather? Mexican heather is relatively low-maintenance and not meticulous when it comes to nutrients. However, you can still boost and maintain your plant by fertilizing in spring, summer, and fall with a balanced feed. 

 

Pruning

Pruning is not a requirement for Mexican heather. However, you can maintain the size and shape of your plant by trimming lightly every spring. You can also use this practice to remove the unhealthy parts. 

 

Common problems

As one can expect, Mexican heather plants are not that prone to many diseases and pests. However, you still want to maintain proper cleanliness and diligence to prevent infestation and diseases. It would also be best to maintain a stable environment such as a greenhouse to discourage spider mites or fungal infections. 

 

Conclusion

You can add another colorful perennial to your garden in three simple steps. Those who know how to grow Mexican heather can quickly tell you that this plant is the easiest to grow. However, remember to plan your planting date and site to ensure that the conditions will support the plant’s development. 

You can start indoors and then plant Mexican heather somewhere with partial shade and fertile, well-draining soil. Ensure soil moisture but never overwater the soil. Once established, you shouldn’t have any issues in growing Mexican heather. 

Leave a Reply

Your email address will not be published. Required fields are marked *

Sign up to our newsletter!