How To Cool A Tent Without Electricity. 5 Best Hacks

There are various ways on how to cool a tent without electricity; you should consider the location, ventilation, material, shape, and so on. There are many things that you need to learn yet so; it’s a good idea to read on!

Indeed, it would be very disappointing if your guests during a tent party or event are all sweaty and complain that it’s freaking hot. You cannot just let that happen; it’s sure to ruin your big day.

If you have a carport, on the other hand, you also do not want your car to be excruciatingly hot while parked under the heat of the sun. Even if you stepped a little inside, you would feel very hot.

In this article, you will know the ways of cooling your tent, which can be done without electricity. By that, you can save up money, plus you get to have a cool event tent or carport.

Before we get into details, let’s first understand the whys. Keep on scrolling to know more!


How To Cool A Tent Without Electricity

Why Are Tents Hot On The Inside?

Wondering why it’s hot inside a tent? If you set up your tent in your backyard with no shade, that would make your experience dreadful. However, the common mistake would be due to the lack of ventilation.

Tents usually trap heat inside it. To give you a clearer picture, it is like a mini-greenhouse where water and vapor flourish because of the small and enclosed area.

The color of the tent also matters because it contributes to the absorption of heat. It is essential that you know how to cool a tent even if electricity is not easily accessible.


Ways In Cooling A Tent Without Electricity

There are specific ways on how to cool a tent without electricity. By this, you can have a well-ventilated tent without spending a considerable sum of money.

For sure, you won’t be buying expensive gadgets and equipment to ensure the tent’s coolness.

Here are the following steps:


Step #1. Select a perfect time to pitch the tent

It is a common mistake not to consider the weather condition when hosting a tent event. The perfect time for you to put up the tent is later in the afternoon where the sun is not high up.

By that action, you can have lesser chances of trapping much warmth on the inside.


Step #2. Provide ventilation for the tent

You must be aware that you surely need ventilation so that you can allow air to go in and out of your tent. There are two main reasons why heat is accumulated:

First is due to the sun; the second is due to the heat discharged from the human body.

To tell you, the more people that stick together in one place, the more heat that is also emitted from their bodies. So if you are packed with guests, better be sure to have proper ventilation on the location.


Step #3. Choose the right tent material

Let us say that you want to make a carport using a tent. The first thing you should keep in mind is choosing the right kind of materials.

For example, you can either opt for a tent that has a nylon or polyester component. These materials are very much affordable and lightweight.

Tents are utilized to be carports because they are much handier and budget-friendly. All you need to do is select the right composition for a comfortable carport experience.


Step #4. Select the right tent shape

A dome tent is cozy and can be very hot inside when the sun is high up (though it is an excellent pick if you use it on cold nights of winter).

However, the best choice is to make it to get a cabin tent because it has a more oversized head that will make your event tent more comfortable.

Besides, the inside of the cabin tent has more room so that air can circulate well. The better the airflow, the better your tent can become.

Furthermore, bell tents are also a good option because it is superior when we talk about ample airflow.


Step #5. Use battery-powered fans and passive cooling

Since this article is about cooling a tent without any electricity, then I assume that it is just fair that you set up a battery-powered fan.

The airflow in which the fans will produce will make the heat bearable for everyone inside the tent.

If you wish for extra cooling, you can do a DIY method of putting ice in front of the fans.

The ice-cold breeze will then be felt mixed in the air that the fans are blowing. The only thing that you have to ensure is that you have a container to hold the water while the ice melts.



In conclusion, there are many ways on how to cool a tent without electricity. We gave you some of the hacks that you can do for a lesser heat tent experience.

Though there aren’t many alternatives for electric fans, battery-powered fans are one option that you can consider.

You have to focus on preventing the heat from ruining your tent event or even making your carport hot as hell.

Thankfully, the methods that we mentioned do not require you to purchase anything costly, so that means you are having a good save up and more information.

Good luck!

Leave a Reply

Your email address will not be published. Required fields are marked *

How To Anchor A Shed

How To Anchor A Shed? Concrete Or Wood? 5 Easy Steps!

Do you want to know how to anchor a shed? For storing yard tools from the environment, outdoor sheds are perfect.

On concrete slabs or constructed over a wooden frame, most outdoor sheds are.

It would be best if you anchored your outdoor shed to the floor to safeguard your shed investment.

High winds, especially in areas vulnerable to tornados, may cause an outdoor shed to blow over or worse. Outdoor sheds anchoring is well worth the time.

The best way to anchor a shed is concrete piers; it is easy to build and economical.


Basic Steps In Anchoring A Shed

When constructing a new shed on concrete piers, the pier plan is laid out based on the shed design.

Here are the basic steps on how to anchor a shed:

Step #1. Dig holes and pack them up with sand and dirt.

Step #2. Put a concrete base tube to build it up.

Step #3. Level it and fill it with concrete to the appropriate height.

Step #4. Until the concrete sets up, set a galvanized anchor bracket in.

Step #5. Align the brackets and level them, and you are all ready to protect your shed.


There are other ways that you can use too!

This article will show you some ways to tie down your storage shed in this article and address some of the reasons for anchoring your outbuilding.

This article will show you some ways to tie down your storage shed and address some of the reasons for anchoring your outbuilding.

How you can anchor a shed on a different type of ground?

Let’s find out!


Steps In Anchoring A Shed On A Concrete Slab

A concrete slab is made up of a flat surface.

In this part, you’ll know how you can anchor a shed on it.


Step #1. Drill holes

Drill holes with a fair bit into the sill plate along the inner circumference of the shed.

Allow the bottom frame a certain diameter as the anchor frame.

Use clay or soil to make up a layer of the sill.


Step #2. Put the masonry

Create holes with a diameter of less than 2.5 inches using a drill and a hammer. Insert the masonry on the openings of the sill plate.


Step #3. Drop the washer

Over the anchor’s threaded section, place the flat washer and loop the retaining nut to the anchor’s top. The nut should not be threaded to the bottom of the thread.


Step #4. Insert the anchor into the slab

The section does not have threads at the bottom of the anchor.

With a hammer, pound the anchor through the openings and into the concrete slab.

Pound the anchor bolts until the bottom of the holes hits them.


Step #5. Finishing touches

Tighten the retention nuts with a socket wrench on the sill plate.


Steps In Anchoring A Shed With A Wood Frame Platform

Aside from concrete, you can also anchor a shed in a wood frame. Here’s how!


Step #1. Place the anchor at a slight angle, accelerating downward on each tip

Force the anchors to the ground until they are entirely placed on the bed.

Position the handle of the hammer in the head of the eye bolt to twist the anchor further into the ground stone. Ground anchors have an auger end that drills into the soil.


Step #2. Secure all wires and cables

Loop one end of the given anchor cable through the head of the anchor’s eye bolt.

With the cable clamp, secure the cable end to the anchor. Using a socket wrench, connect the clamp.


Step #3. Thread the cables to the shed

Loop the end of the cable into the head of the anchor’s eye bolt and pull the string line.

Through a cable clamp, secure the cable to the anchor.

Repeat on both shed corners.


How To Anchor A Metal Shed

Metal sheds are available in various sizes and are typically heavier than huts made of plastic.

From the outside, you can tie the shed to a concrete pile at each corner.

A metal strap anchors the shed and roof, or a cord running up the wall between the roof metal and metal rafters.

Back down the opposite wall and fixed to a ring or circle bolt in the concrete piling.

Spikes in the Auger type tie down are also a perfect way to lock the steel shed to the ground.

Now, it’s time to screw the auger into the earth at the four corners.

And you can do this method as an alternative to the concrete pilings.


Best Way To Anchor The Shed To The Ground

Shed on a concrete ground is the best way to secure your storage.

Wood or metal anchors can deteriorate with time when in contact with the earth.

When they wear out, wires, plates, and bolts can be tested and patched above ground.

That is simple and less costly and functions as a new and retrofit solution.

Concrete anchor for tent lasts a long time and will even make your stay a long time in your shed.

It costs more, so it’s definitely worth what you’ve got sitting on it.



For you to maintain those supplies and resources that cannot be put at home, your shed is necessary.

For it to stand correctly, you need the appropriate materials and protection.

It helps to keep the goods safe and dry from all environmental conditions. That’s why anchoring the shed to a foundation is advised.

I hope that this article on how to anchor a shed helps you whether you’re a beginner or a handyman.

Thanks for reading!

Leave a Reply

Your email address will not be published. Required fields are marked *

Sign up to our newsletter!