How to convert a pressure washer into a sewer jetter? It involves attaching a water hose first to the pressure washer, including the valve, and getting the jumper hose connected, plus the nozzle, too. Afterward, turn the power tool on and firmly connect it so that it doesn’t have any leaks.
As you convert a pressure washer into a sewer jetter, it saves you hundreds to thousands of dollars in terms of maintenance.
It will turn out as a long-term solution as it opens sewer lines and cleans them. Use the sewer jetter if pipes drain slowly, are noisy or gurgling, are smelly, bring an increase in the water bill, and pipes are potentially deteriorating and old already. But, my friends, there are more things that you should know, so without further ado, let’s start!
What First Is A Sewer Jetter
A water jetter or sewer has classified a hose under high pressure as helpful in cleaning a clogged drain. Both DIY and professional plumbers utilize this powerful tool for heavy-duty handling type of drain cleaning projects in businesses and homes. The blockage problem in most homes is brought by the roots of the tree that grow in sewer drain pipes. So far, lots of nozzle variations are there to find in their various angles of the water stream.
Ways To Convert A Pressure Washer Into A Sewer Jetter
So, how to convert a pressure washer into a sewer jetter? The pressure washer is possible to be converted into a sewer jetter. But, ensure the pressure washer’s PSI falls at exactly 1,500 but not exceeding 4,400 PSI pressure. The conversion kits to find on Amazon can support 4,000 PSI. This supports most electric models of pressure washers used, including non-commercial models of gas pressure washers.
The difference between an industrial sewer jetter type and the pressure washer is the quantity of water in GPM. It is less than expected. The pressure washer has a two to four GPM rating, whereas the usual sewer jetter is four to nine GPM. It can go over twenty-five GPM as built up behind the trailer truck. The best pressure washer is one that delivers two-GPM & 2,000 PSI. Or else, you may consider clearing buildup or debris from the drainage pipes.
Sewer Jetter Conversion Kit Inclusions
The sewer jetter kit is useful for connecting the pressure washer handle. It also comes in various options. The two parts of the conversion kit are as follow:
#1. Sewer jetter type of nozzle
Three primary nozzles are introduced as button nose, rotating, and laser. The button nose and rotating are among the most popular. Nozzles also come in varying degrees sprays from zero degrees to forty degrees. The spray coming from the angle and sides pulls a hose through the drain, not forcing the hose continuously. The nozzle to use depends on your needs, like the removal of blockages, the cleaning of debris, and the cleaning of pipes. Check out the pressure noozle chart.
#2. Jumper hose
The hose attached to the sprayer of a pressure washer using couplings is called a ball valve. This is especially true if the hose cannot connect to a spray wand. The typical length of the hose is fifty to one-hundred feet, with a slick cover that moves throughout the pipes. Plus, it can resist abrasion while you work down lines. Know the PSI of the pressure washer and the estimated length of pipe to clean.
A hundred feet of hose for sewer jetting is a great alternative. Some hoses feature a reel that rolls up when completed. Plus, they make way for a hose to get untangled. These seemed an excellent option but still slightly more difficult to clean when used.
You may also be interested to know about how to repair pressure washer hose.
Connecting The Sewer Jetter To Pressure Washer
Connect it immediately to a pressure washer when you know what sewer jetter to get. Follow the clear steps below:
- Connect the water line to a pressure washer just like you do;
- Make use of a connected coupler that’s’ part of the sewer jetter kit and to the spray wand; and
- Make use of the quick connector found in the hindmost part of your jetter hose. That way, the nozzle is connected as you like it to be used.
Learning How To Use A Sewer Jetter
Follow the steps below after getting the sewer jetter kit connected to a pressure washer.
- Get the pressure washer turned on;
- Place the hose of the sewer jetter a foot into a drain;
- Press the spray wand handle;
- Motion the hose down the drain while you hold the handle of the spray wand. The hose continues down and then, pulling it back half a distance and leaving the sides clean. Continue past the last point. Follow the process again until reaching the end;
- Listen to the change in pressure, mainly as you handle a clog. If there’s’ a change in water fluid, pull the hose back to allow the clog to clear and continue. Repeat the process as necessary;
- Slowly pull the hose backward and upward until you achieve a foot distance above the drain;
- Wait until the water finally stops. Pull out the hose of the sewer jetter;
- Make sure that you have disconnected the jetter hose. Remove dirt from it with a light nozzle on a garden hose or pressure washer;
- Convert the sewer jetter into a pressure washer; and
- Wear some rubber gloves when you feed the line in a sewer jetter and also out of pipes.
It’s’ A Wrap!
Now you learn how to convert a pressure washer into a sewer jetter by attaching a water hose first to the pressure washer, including the valve, and getting the jumper hose connected, plus the nozzle, too. Afterward, turn the power tool on and firmly connect it to prevent any leaks. Just follow these steps carefully, and you’re good to go!
Click on these links to read related articles; know how to use Greenworks pressure washer and how to use a Honda pressure washer.