How To Clean Viking Stove? 3 Easy Steps To Follow!

Are you here to find out how to clean Viking stove? It is simple. Use a wet sponge to clean the grates and burner caps after use, and then air-dry them entirely before reusing them.

Remember that daily usage of cleansers and polishes is not recommended. Once a month or twice a month is all that is required of you.

how to clean Viking stove

Keep reading as we will elaborate more on this. You will get to know the steps for cleaning your Viking stove and some cleaning and maintenance tips to keep the unit look as new. Furthermore, you will know which areas should you focus on when cleaning.


Steps To Clean Viking Stove

So, how to clean Viking stove? Depending on which part of the burner you’re cleaning, cleaning Viking range burners can be done in several ways. First, you may clean the Viking stove grates and burner caps using a non-abrasive cleaning pad and a Soft Scrub Cleaner.


Step #1. Clean the grates

You can try spraying Easy-Off cleaning on the burner caps and grates to remove any lingering stains, then laying them out on newspaper. Rinse well with water after letting the cleanser stay for 1-2 hours before rinsing thoroughly.


Step #2. Remove stains from burner bases

Before reassembling, make sure that all parts are thoroughly dry to prevent rusting. Use hot, soapy water to wash away stains from the burner bases frequently. Stains that won’t come out with cold water can be removed with hot water. Scratch areas with a wooden nylon spatula and then gently wipe away. For additional information, know how to clean a burnt stove


Step #3. Clean the sealed burner bowls

Use hot soapy water and a soft cloth to clean sealed gas burners and burner bowls daily. You can remove by using a Soft Scrub cleanser and a non-abrasive pad. Be gentle when scrubbing to prevent harm to the surface. If I were you, check out how to degrease the stovetop and other hard to clean appliance tips


Maintaining A Viking Stove

The steel griddle on a Viking stove must be cleaned and cared for carefully.  You must season the griddle before use by performing the procedure below, which uses14 cups of white vinegar and 14 cups of warm water to go a long way toward cleaning the skillet. To help you maintain your stove, read on Viking oven and range cleaning tips

After completely drying, wash in warm, soapy water to remove any remaining grime. When the skillet is dry, wipe it off with a cloth or paper towel and apply 12 to 1 teaspoon of vegetable oil. Use a clean cloth once an hour has elapsed.

As long as you use a little oil, you won’t have to wash your griddle after every usage. But if your griddle has been used heavily, then thorough cleaning must be done.

If you’re using a nonstick skillet, add some room-temperature club soda while it’s still hot. A metal spatula for scraping food debris and oil from the greased pan is needed.

Take it apart and give it a good scrub in some warm soapy water to clean the rack. When you’ve finished cleaning the grill, season it as described above.


Cleaning The Heat Sourcing Centers

After each cooling cycle, wash the vase with hot, soapy water. Carpets should not be cleaned with abrasive materials such as steel wool, scouring powders, or other household cleaners.


#1. Burner top

After each usage, use hot soapy water and a soft cloth to clean the sealed burner top and burner bowl.You can treat reoccurring blemishes with a soft scrub and a blue Scotch-Brite pad (without bleach). It’s essential to exercise caution while using Scotch-Brite since it might damage porcelain if misused. 


#2. Control manner

If something needs cleaning, only use a soft cloth and some hot, soapy water. Using aggressive cleaners or chemicals based on ammonia can remove the graphics from the control panel.


#3. Steel surfaces

Start with a warm, soapy towel for routine cleaning. Next, clean the surface with a damp cloth. Using a damp microfiber cloth, remove any remaining product from the surface. To get the best results, work in the direction of the product’s grain or brushed surface.

Putting acid on it, like lemon juice or tomato sauce, will make it discolor. So instead, you can use stainless steel appliances back to life by using a stainless steel cleaning solution and a polish like Thor.


Tips for Cleaning the Outside

Several colorful color schemes are available for the Viking collection. Here’s how to keep the stainless steel or painted finish on your range looking like new. First, use a soft cloth and warm soapy water to scrub stainless steel surfaces regularly gently.

Use a microfiber cloth to polish the surface when it has dried completely. Once every two weeks, use a stainless steel cleaner and Thor polish to get rid of fingerprints and bring out the luster of your stainless steel.

Use a soft cloth and warm soapy water to clean the control panel. Avoid using abrasive or ammonia-based cleansers on the panel since they could erase the graphics. You can clean knobs with a warm, soapy cloth and warm water. Again, avoid using ammonia- or abrasive-based cleaners.


It’s A Wrap!

Now you are aware that knowing how to clean Viking stove is not that hard. If you face stubborn grime and grease layers, heat a cloth and use a wooden nylon spatula to dislodge the substance. For more stove articles, check out how to clean stove top elements. Thanks for stopping by!

Leave a Comment