Effective 4-Step Guide On How To Clean Mold Out Of Bath Toys

Molds get their spores right about anywhere, and the worst place you’ll find it is your kid’s stuff, so you need to know how to clean mold out of bath toys. It might be one of those unlikely and not-to-be suspected spots, but nevertheless, it may have been something you’ve already seen happening.

Molds do require some specific setups for them to thrive. They need to first implant some spores on a particular object with some nutrients, enough moisture, and humidity, as well as the absence of sunlight.

how to clean mold out of bath toys

While you definitely wouldn’t want to let these triggering molds near your children, there is a chance that their rubber bathing toys can serve as substrate carriers for these molds. If it’s a bit late and such colonies have already gone and grown in the bath toys, then you have no choice but to deal with them.  

 

Steps For Cleaning Mold Off Bath Toys 

If you’ve done some cleaning on the bath toys previously, getting the molds off should be quite an easy and fast process for you. Though the difference is that you’re dealing with reactive and somewhat live, it’s still worthwhile for you to properly learn the following steps on mold cleansing.

 

Step #1. Mix your cleaning solution

The first thing you need to start removing the molds of the bath toys is to create a mold-killing solution. It’s recommended that you wear a suitable pair of masks and gloves before you start mixing, though, since not only will the answer be odorous, the molds might be as well.

You can pick either vinegar or bleach for this solution. A mix of an 80% solution with water will do for vinegar, while a 10% solution of bleach with water will also suffice.

After prepping the solution, if the bath toys you’re going to include those rubber ones that have a hole in them that typically makes a squeaky sound when pressed, you need to press on them first. This is to drain as much water and possibly mold builds up inside them before washing.

 

Puffy Lux

Step #2. Soak the bath toys in the solution

The following process is to pour the solution into a basin and let the toys soak in it. Ensure there is enough solution to saturate all toys, even if not all once, but a new solution for every toy to maximize efficacy.

Used a scrub and toothbrush to scrape all the molds you see on the surface, especially on intricate corners and sides.

For the rubber toys with holes mentioned earlier, you don’t really have much choice on cleaning the inside surfaces so squeeze them while they’re fully submerged in the solution. When you ungroup it underwater, the toy should vacuum fresh solution inside, rinsing the inner surface again.

Do these as many times as you can until a clear solution is pumped out.

 

Step #3. Wash the bath toys with detergent

After the molds have been cleared, you need to run the toys with detergent and a bit of further scrubbing. This is so the previous cleaning solution doesn’t stick on the toys and cause a foul odor or other problems in the future.

The same should also be done with the rubber toys with holes. Needless to say, it will cause problems later on if some of the cleaning solutions get stuck on the toy and mix up with your kid’s next bath session.

 

Step #4. Rinse and dry the toys

Now that you’ve thoroughly washed the bath toys, it’s time to rinse and dry them. Soaking them into three consecutive fresh sets of clean tap water should be enough for this.

You can rinse it as much as until no more soap and bubbles come out from them. You can use pressurized water if you want, but machine washing them would not be recommended.

For drying, you can wipe each toy individually with paper towels then air dry them. Some drying under the sun would be ideal if the type of material used for the toy allows for it, but you must absolutely not subject them to a machine drier.

If molds have gone beyond the toys, you should check how to get rid of black mold in a hot tub to deal with such problems.

 

Why do bath toys get moldy?

Bath toys are constantly in contact with water which the molds need to grow, which is mainly why they get infected. After some time, these toys can also accumulate organic things in them, which are somewhat slimy and can be something molds can grow on.

The fact also that these toys rarely see the sun can also inspire mold growth. That is why molds should not be an often problem if you clean these toys regularly and air them out once in a while.

 

What is the best way to sanitize bath toys?

Monthly bleaching would be the best way to sanitize your kid’s bath toys using the previously mentioned solution. Bleach combined with weekly sun exposure and regular washing should keep the toys neat and sanitary.

For infants, you can also use hot-water dipping for sanitation.

If such molds are reoccurring, here’s an article on what causes decay in apartments so you can deal with a possible source.

 

Conclusion

We’ve finished dishing out how to clean mold out of bath toys for your kids. Following these steps regularly should keep the mildew away and keep you an applaudable adult.

Leave a Comment