How To Clean GE Washer And Its Different Sections? 6 Awesome Maintenance Tips!

How to clean GE washer? Follow the guide below on cleaning it, including an inlet filter, drain pump filter, tub, and basket.

Know that the washer is like a workhorse that helps you keep your laundry routine smooth. But when not in use, you will notice the smell, look, and performance.

How to clean GE washer

The good thing is that you can keep your GE washer clean and well-maintained. Be consistent at the routine, considering common sense, care, and regular cleaning. There is so much more to know. So, read on further to learn the easy ways on cleaning GE washer inlet filters and other sections.

 

Steps To Clean GE Washer Inlet Filter

Turn off the water in the washer and the power supply as the first step on how to clean GE washer. Do this before you attempt any repair, thus avoiding electrocution and leakage. Secondly, return to the washer and get the water inlet hoses disconnected from the washer. Thirdly, pull the mesh filter out the washer water inlet port using pliers. Next, remove the filter and place it in the sink. Rinse any dirt that accumulates in it. And then, put the filter that is clean back in the port of the water inlet. Connect the washer to the inlet hoses again. And, turn on the water and the power supply of the washer. Lastly, run the wash cycle so that everything works properly.

 

Steps To Clean GE Washer Tub

Firstly, remove the clothes inside the washer. Secondly, pour 2 cups of vinegar onto the washer dispenser drawer. The vinegar kills the mold and removes foul odors. Turn on the water & power supply of the washer. Next, operate the washer at a normal wash cycle. Set it as well at its highest temperature. Complete the washing cycle and dry off the tub with a cloth. Clean the tub seal grooves to avoid mold that builds up. Lastly, leave the washer door for several hours for the air to come out. You may also want to read about how to clean mold from the front load washer gasket

 

Steps To Clean GE Washer Drain Pump Filter

Firstly, turn off the water & power supply of the washer before you do any repair. Do this to avoid any possible electrocution and leakage in water. Use the flat-blade type of screwdriver to pry out the small panel. This panel is at the low and front part of the washer. Pull the drain channel out below the panel. Next, put some containers below the drain channel that will catch water stuck in the washer. Turn the knob in the drain channel in a counter-clockwise motion. Do it slowly to control the water release.

And, remove the drain pump filter and place it in a sink after the water drains out from the washer. Clean any debris or lint that accumulates in it. Afterward, place the filter back correctly, turn it in a clockwise direction. Push its access panel after you flip the drain channel up. Then, turn the water & power supply of the washer. Lastly, operate the washer at a wash cycle so that everything will work properly. Also, read about how to clean washer drain hoses

 

Steps To Clean GE Washer Basket Clean Cycle

Firstly, remove the clothes from the washer. Secondly, pour one cup of bleach into its tub. Thirdly, close the washer door to turn on the power and water supply. Next, click the washer power button. Choose the cycle “Basket Clean” with the use of a selector knob. Click the start button that shows up right through the display. Leave the washer door open for several hours if the cycle completes already. You may read how to fix spin cycle on washer.

Puffy Lux

 

Other Maintenance Tips To Follow From Experts

Here are some maintenance tips that you’ll be thankful for.

 

#1. Use only the suitable laundry detergent

HE laundry detergent is applicable in modern washers such as the GE washer that produces only a few studs and reduces the residues left in the wash cycle.

 

#2. Do not load it up with too many items

Large loads put a strain on the driver, bearings, & essential mechanical components. It can shorten the lifespan of the washer and makes the washing process inefficient. In this regard, soap residues cling to the clothes since the water does not circulate much in the loaded items.

 

#3. Clean the washer regularly

Clean the washer interior with a detergent dispenser regularly. Find out the ways to keep the hoses and filters clean. Do this to avoid unpleasant odor in the washer and to avoid mechanical issues.

 

#4. Never leave all wet clothes

Remove laundry when the cycle finishes already. Do not allow the wet clothes to stay still in the washer for hours. Or else, it becomes a breeding environment for bacteria, unsightly mildew, and musty smells. Leave the lid or door open if you will not use it.

 

#5. Never leave damp clothes to stay in the machine

When every cycle ends, remove the laundry right away. Never leave damp clothes in the machine as this creates an environment for bacteria, like unsightly mildew and musty smells. Better yet, leave the lid or washer door open if you will not use it.

 

#6. Position it correctly

The washer may soon shift later because of all the vibration and shaking of the spin cycles. So, position it 4-inches beginning in the wall to avoid kinking in the pipes. If it tends to walk, it means it does not level properly. Turn its legs clockwise to balance it properly as this helps protect the appliance and the flooring.

 

It’s A Wrap!

Keep in mind the steps on how to clean GE washer and its sections as basket clean cycle, drain pump filter, tub, and inlet filter. Show consistency in regular cleaning so that the machine is always functional and lasts longer and operates even more! It may be a good idea to know why does my washer smell and how to prevent and clean it.

Leave a Comment