Welcome to the Krostrade Marketplace, please excuse our appearance, we are still under construction.

How To Clean A Tent That Smells. 5 Easy Steps

I know- you’re having a hard time due to the awful smell of your tent; so you should know how to clean a tent that smells. Please, don’t worry at all because we have a solution to that issue, and I am sure you can do it in a breeze.

For sure, it can be embarrassing if you are to host an event in your backyard; and you discovered that the large tent you would use has a bad smell.

In this article, we’ll teach how to take away the foul smell coming from your tent. Through this, you can handle a tent event without worrying about the stinky smell (maybe due to prolonged storage or some other reasons).

If you are ready to have some fruitful information, let us jump into the discussion!

 

How To Clean A Tent That Smells

Ways On How To Clean A Smelly Tent

Prevention will always be the key. Moisture is the main reason why tents develop an unwanted smell. Maybe, you stored it while it is still damp or some moist seep into the container.

I know, you haven’t prevented the stinky smell that’s why you’re here. In this part, you’ll know several effective ways to clean a tent that smells. Here are the steps on how to clean a tent that smells:

 

Step #1. Prevent the possibility of a stinky tent

Here are the ways on how you can prevent a stinky tent:

  • You can purchase a tent footprint, but it’s optional. This thing prevents your tent from getting damaged or collecting rainwater, which can also lead to damage.
  • After the rain, wipe the tent instead of waiting for it to dry on its own. Because if you are to pack it while being wet, then that is the time when the smelly problem will arise. That is why you should always keep it dry.
  • Make sure to clean your tent every after use. Through this, you can be sure that no stain or moisture can make your tent stinky over time.
  • You can also spot clean the tent, and when you are sure that there are none left, you can now correctly store it.

 

Step #2. Do not wash your tent using a washing machine

You should take note of this step though it is already common knowledge. But as a reminder, do not try to wash your tent using a washing machine. Tents are not designed for tumbling and spinning; washing these through a washing machine can cause them to tear up.

 

Step #3. Use soap when cleaning and go all natural

There are two options you can use when cleaning your tent after an event- either a mild soap or a dishwashing soap. However, based on experience, experts suggest that the use of dishwashing soap is more effective.

If it is possible to have a mild fragrance soap, then go for it. It is because fragrant things attract bugs and mosquitoes, and that is something that you should avoid.

You can also opt for a non-chemical solution (you can always DIY). A solution can be made; all you need is vinegar, lemon juice, and water. This method is one of the preferred by many because it is cost-effective and safe.

 

Cleaning a tent that smells using vinegar

  1. Suppose you have a large tent but a gallon of vinegar. Make an equal mix of water and vinegar using a container like a spray bottle.
  2. You can have added lemon juice to the solution. It will offset the smell of the vinegar.
  3. Pitch the tent on the outside or in the yard. Spray the dirty area and let it dry in the sun.
  4. Please do not use bleach, for it will indeed weaken the tent’s fabric.

 

Step #4. Handwashing

If your tent has been filthy, you might need to scrub it all off. A non-abrasive sponge is recommended for this method so that it won’t cause harm to your tent.

Hand wash the outer fabric thoroughly and avoid scrubbing the underside. Do not scrub too hard because it can end up destroying the whole tent.

Keep in mind that a tent is much easier to clean if you pitch it. While the chemical solutions are the usual mindset, I would use home remedies like mild soaps and dishwashing soaps.

 

Step #5. Store your tent properly

After a tent event, give your tent a good wash and let it dry under the sun. If the weather is not suitable for sun-drying, then you can put it up in the garage for about 24 hours by letting the air dry it.

Once you feel that it is completely dried up, pack it in a plastic container. You also have to be sure that the place where you are going to store it is not prone to moisture 9such as the basement, attic, or the outside shed).

It is also a good idea to put baking soda bags, for they can control the moisture buildup inside.

 

Conclusion

We hope that we provided you enough strategies on how to clean a tent that smells. Remember to check the label to have decreased chances of ruining your tent due to the improper use of chemicals.

Take note prevention is superior in all of these methods. Good luck with your cleaning operation, and we hope you have more tent events for the upcoming months or years!

Leave a Reply

Your email address will not be published. Required fields are marked *

How To Anchor A Shed

How To Anchor A Shed? Concrete Or Wood? 5 Easy Steps!

Do you want to know how to anchor a shed? For storing yard tools from the environment, outdoor sheds are perfect.

On concrete slabs or constructed over a wooden frame, most outdoor sheds are.

It would be best if you anchored your outdoor shed to the floor to safeguard your shed investment.

High winds, especially in areas vulnerable to tornados, may cause an outdoor shed to blow over or worse. Outdoor sheds anchoring is well worth the time.

The best way to anchor a shed is concrete piers; it is easy to build and economical.

 

Basic Steps In Anchoring A Shed

When constructing a new shed on concrete piers, the pier plan is laid out based on the shed design.

Here are the basic steps on how to anchor a shed:

Step #1. Dig holes and pack them up with sand and dirt.

Step #2. Put a concrete base tube to build it up.

Step #3. Level it and fill it with concrete to the appropriate height.

Step #4. Until the concrete sets up, set a galvanized anchor bracket in.

Step #5. Align the brackets and level them, and you are all ready to protect your shed.

 

There are other ways that you can use too!

This article will show you some ways to tie down your storage shed in this article and address some of the reasons for anchoring your outbuilding.

This article will show you some ways to tie down your storage shed and address some of the reasons for anchoring your outbuilding.

How you can anchor a shed on a different type of ground?

Let’s find out!

 

Steps In Anchoring A Shed On A Concrete Slab

A concrete slab is made up of a flat surface.

In this part, you’ll know how you can anchor a shed on it.

 

Step #1. Drill holes

Drill holes with a fair bit into the sill plate along the inner circumference of the shed.

Allow the bottom frame a certain diameter as the anchor frame.

Use clay or soil to make up a layer of the sill.

 

Step #2. Put the masonry

Create holes with a diameter of less than 2.5 inches using a drill and a hammer. Insert the masonry on the openings of the sill plate.

 

Step #3. Drop the washer

Over the anchor’s threaded section, place the flat washer and loop the retaining nut to the anchor’s top. The nut should not be threaded to the bottom of the thread.

 

Step #4. Insert the anchor into the slab

The section does not have threads at the bottom of the anchor.

With a hammer, pound the anchor through the openings and into the concrete slab.

Pound the anchor bolts until the bottom of the holes hits them.

 

Step #5. Finishing touches

Tighten the retention nuts with a socket wrench on the sill plate.

 

Steps In Anchoring A Shed With A Wood Frame Platform

Aside from concrete, you can also anchor a shed in a wood frame. Here’s how!

 

Step #1. Place the anchor at a slight angle, accelerating downward on each tip

Force the anchors to the ground until they are entirely placed on the bed.

Position the handle of the hammer in the head of the eye bolt to twist the anchor further into the ground stone. Ground anchors have an auger end that drills into the soil.

 

Step #2. Secure all wires and cables

Loop one end of the given anchor cable through the head of the anchor’s eye bolt.

With the cable clamp, secure the cable end to the anchor. Using a socket wrench, connect the clamp.

 

Step #3. Thread the cables to the shed

Loop the end of the cable into the head of the anchor’s eye bolt and pull the string line.

Through a cable clamp, secure the cable to the anchor.

Repeat on both shed corners.

 

How To Anchor A Metal Shed

Metal sheds are available in various sizes and are typically heavier than huts made of plastic.

From the outside, you can tie the shed to a concrete pile at each corner.

A metal strap anchors the shed and roof, or a cord running up the wall between the roof metal and metal rafters.

Back down the opposite wall and fixed to a ring or circle bolt in the concrete piling.

Spikes in the Auger type tie down are also a perfect way to lock the steel shed to the ground.

Now, it’s time to screw the auger into the earth at the four corners.

And you can do this method as an alternative to the concrete pilings.

 

Best Way To Anchor The Shed To The Ground

Shed on a concrete ground is the best way to secure your storage.

Wood or metal anchors can deteriorate with time when in contact with the earth.

When they wear out, wires, plates, and bolts can be tested and patched above ground.

That is simple and less costly and functions as a new and retrofit solution.

Concrete anchor for tent lasts a long time and will even make your stay a long time in your shed.

It costs more, so it’s definitely worth what you’ve got sitting on it.

 

Conclusion

For you to maintain those supplies and resources that cannot be put at home, your shed is necessary.

For it to stand correctly, you need the appropriate materials and protection.

It helps to keep the goods safe and dry from all environmental conditions. That’s why anchoring the shed to a foundation is advised.

I hope that this article on how to anchor a shed helps you whether you’re a beginner or a handyman.

Thanks for reading!

Leave a Reply

Your email address will not be published. Required fields are marked *

Sign up to our newsletter!